• Transportation Technology and Policy
• /
• v.6 no.1
• /
• pp.107-115
• /
• 2009

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.21-22
• /
• 2001

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.38-55
• /
• 2021

Cherwon Castle is located in Pungcheonwon, Cherwon, in the center of the Korean Peninsula. Currently, it is split across the Demilitarized Zone (DMZ) between the two Koreas. It attracts attention as a symbol of inter-Korean reconciliation and as cultural heritage that serves as data in making important policy decisions on the DMZ. Despite its importance, however, there has not been sufficient investigation and research done on Cherwon Castle. This is due to the difficulty involved in investigation and research and is caused by the site's inaccessibility. As a solution, the current investigative methods in satellite and aerial archeology can be applied to interpret and analyze the structure of Cherwon Castle and the features of its inner space zoning. Cherwon Castle was built on the five flat hills that begin in the northern mountainous hills and stretch to the southwest. The inner and outer walls were built mainly on the hilly ridges, and the palace wall was built surrounding a flat site that was created on the middle hill. For each wall, the sites of the old gates, which were erected in various directions , have been identified. They seem to have been built to fit the direction of buildings in the castle and the features of the terrain. The castle was built in a diamond shape. The old sites of the palace and related buildings and landforms related to water drainage were identified. It was verified that the roads and the gates were built to run from east to west in the palace. In the spaces of the palace and the inner castle, flat sites were created to fit different landforms, and building sites were arranged there. Moreover, the contour of a reservoir that is believed to be the old site of a pond has been found; it lies on the vertical extension of the center line that connects the palace and the inner castle. Between the inner castle and the outer castle, few vestiges of old buildings were found, although many flat sites were discovered. Structurally, Cherwon Castle is rotated about nine degrees to the northeast, forming a planar rectangle. The planar structure derives from the castle design that mimics the hilly landform, and the bending of the southwestern wall also attests to the intention of the architects to avoid the wetland. For now, it is impossible to clearly describe the functions and characters of the building sites inside the castle. However, it is believed that the inner castle was marked out for space for the palace and government offices, while the space between the outer and inner castle was reserved as the living space for ordinary people. The presence of the hilly landform diminishes the possibility that a bangri (grid) zoning system existed. For some of the landforms, orderly zoning cannot be ruled out, as flat areas are commonly seen. As surveys have yet to be conducted on the different castles, the time when the walls were built and how they were constructed cannot be known. Still, the claim to that the castle construction and the structuring of inner spaces were inspired by the surrounding landforms is quite compelling.

• Journal of architectural history
• /
• v.24 no.3
• /
• pp.31-41
• /
• 2015

This study aims to draw out planning principles and structure of Iksan imperial capital city in late Baekje, especially in view of the relationship among imperial capital city planning area, skeletal axis and the location of royal castle. With site survey and analysis of historical records, old maps, topographical maps, archeological excavation data, land registration map of 1915, some significant inferences were drawn out. Firstly from the point of topological conditions, the contiguous line of a stratum from Mireuk mountain(彌勒山) to Wangkung-ri castle(王宮里遺蹟) and two waterways made a topological axis of Iksan Imperial capital city. Secondly district of Iksan imperial capital city can be deduced to the inner area north to Kummado soil wall(金馬都土城), south to the confluence of Iksan river(益山川) and Busang river(扶桑川), west to Okum mountain fortress(五金山城) and Galjeon river(葛田川), east to line near to eastern wall of Jesuksa temple(帝釋寺). Iksan ssang-reung(益山雙陵) was located outside western boundary line of capital city. Thirdly axis from Wangkung-ri castle to northern Kummado soil wall made a skeletal axis of city structure. It got through northern lowland along Buk river(北川) between Yonghwa(龍華山) and Mireuk mountain. Fourthly the location of royal palace can be deduced to the north part of the city around Kumma town area along the planning principle of northern royal palace.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.281-288
• /
• 2001

Phosphating treatments have been performed to improve paint adhesion and corrosion resistance of zinc and zinc alloy coated steels for a long time. In this work, the effects of the addition of chelate compound were studied to improve the stability of surface conditioning solution and properties of zinc phosphate films. The coalescence of colloidal Ti-compound and extraneous charged particles (alkaliearth metal cation such as $Mg^{2+}$ , $Ca^{2+}$ ) were suppressed by using a surface conditioning solution with chelate compound. Therefore, after surface conditioning solution containing chelate compound was left standing for one week at room temperature, the formation of a white sediment was decreased comparing to surface conditioning solution without chelate compound. The crystal size of phosphate film was fine and the whiteness value of phosphated zinc coated steel sheets was also high without the decrease of corrosion resistance and anti-patina. It was very effective to use chelate compound improving the stability of surface conditioning solution.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.306-314
• /
• 1998

Acetolactate synthase (ALS) is the common enzyme in the biosynthesis of branched chain amino acids, Val, Leu, and Ile in bacteria, yeast, and higher plants. The enzyme is target site of several classes of structually diverse herbicides, including the sulfonylureas, the imidazolinones, the triazolopyrimidines, and the primidyl-oxy-benzoates. We have synthesized new triazolopyrimidine (TP) derivatives, and determined their inhibitory activities on barley ALS. $lC_{50}$ values for the active compounds were 3.2 nM-0.62 mM, and some of them appeared to be potent inhibitors. The progress curves for inhibition of ALS by TP4, a representative derivative, indicated that the extent of inhibition increased with incubation time. The inhibition of ALS by TP4 showed mixed-type inhibition with respect to pyruvate. Dual inhibition analyses of TP4 versus imidazolinone Cadre and feedback inhibitor Leu suggested that three different classes of inhibitors bind to ALS in a mutually exclusive manner. Chemical modification of tyrosyl residues of ALS decreased sensitivity of ALS to TP4, while modification of tryptophan and cysteine did not affect the sensitivity.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.461-468
• /
• 1999

Acetolactate synthase (ALS) catalyzes the first common reaction in the biosynthesis of branched-chain amino acids, valine, leucine, and isoleucine. ALS is the common target of several classes of structurally diverse herbicides, the triazolopyrimidines, the imidazolinones, the sulfonylureas, and pyrimidyl-oxy-benzoates. We examined ihibitory activities of newly synthesized triazolopyrimidine sulfonamide derivatives using partially purified ALS from barley. $IC_{50}$ values for the active derivatives are 0.5nM∼8$\mu$M. Among them TP1 and TP2 are the most potent ALS inhibitors with $IC_{50}$ values of 0.5nM and 1.6nM, respectively. These inhibitors are more potent in the inhibition of barley ALS than commercial herbicides, Metosulam ($IC_{50}$;3.6 nM), Flumetsulam ($IC_{50}$;126 nM), and Cadre ($IC_{50};4 {\mu}M$). The progress curves for inhibition of ALS by TP2 showed that the amount of inhibition increases with time. The inhibition of ALS by TP2 was mixed-type inhibition with respect to pyruvate. Dual inhibition analyses of TP2 versus an imidazolinone, Cadre, and Leu showed parallel and intercepting kinetic pattern, respectively. The results suggest that TP2 binds to ALS competively with Cadre but not with Leu. Chemical modification of cysteinly residues in ALS decreased the sensitivity of ALS to Leu, while the modification did not affect the sensitivity of ALS to TP2 and Cadre.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.05a
• /
• pp.51-52
• /
• 2000

전기아연도금강판은 표면이 미려하고 희생방식력이 뛰어나기 때문에 주로 자동차와 가전, 건자재 등에 많이 사용된다. 현재 냉연 표면처리 제품들은 연속도금공정에 의해 생산되고 있으며 고전류밀도에 의한 고속생산과 도늠액 제조와 조성이 비교적 단순해야 하는 여러 가지 이유로 염산욕과 황산욕을 가장 많이 사용하고 있다. 최근에 신설된 당사의 전기도금공정은 수직형으로 황산욕에서 불용성 양극을 채용하여 아연을 전기도금하고 있다. 일반적으로 황산욕은 염산욕 대비 전기 전도성이 나빠 과전압이 크게 걸리므로 불용성 양극을 사용하여 극간 거리를 최소화할 필요가 있다. 그러나 $Ir0_2$가 코팅된 불용성 양극은 가격이 비싸기 때문에 극간 거리를 너무 짧게 하면 깡대에 의해 손상을 받을 수가 있어 극간 거리를 줄이는데 한제가 있다. 따리서 용액의 전도도들 증가시켜 과전합을 줄이기 위해서는 타사에서 현재 사용하고 있는 황산나트륨, 황산칼륨, 황산암모늄 등에 대한 검토가 필요하다. 전기전도 보조제들은 용액의 전기전도도 뿐만 아니라 도금층의 외관 및 미세구조에도 많은 영향을 주는 것으로 알려져 있다. 따라서 본 연구에서는 황산나트륨, 황산암모늄의 농도를 변화시켜 표면외관, 한계전류밀도, 미세구조, 우선배향성 등을 조사하여 최적의 물성을 갖는 아연 도금층을 얻기 위한 조건을 도출하고자 하였다. 전기아연도금용 소재로는 두께 0.8mm이고 크기가 $100{\times}120mm$인 중저탄소강 (0.02% C)을 사용하였으며 전처리 과정으로 탈지와 산세를 행하고 현장 도금액을 사용하여 다음과 같은 조건 하에서 아연도금을 행하였고 극간전합을 측정하였다. 도금 후 표면의 미세구조는 SEM을 사용하여 관찰하였으며 표면외관 특성을 분석하기 위해 광택도계(Tri- Microgloss-60-85)를 이용하여 입사각 $60^{\circ}$ 에서 광택도를 측정하였고, 색차계(Color Quest II Hunter Lab.)를 사용하여 백색도를 각각 측정하였다. 또한 X선 회절기를 이용하여 도금층의 우선 배향성을 분석하였다.

• Microbiology and Biotechnology Letters
• /
• v.30 no.1
• /
• pp.51-56
• /
• 2002

An antitumor substance was purified from the culture filtrate of phytopathogenic fungus Alternaria brassicicola SW-3 isolated from soil of a chinese cabbage patch, and its characteristics were investigated. Antitumor activity of A. brassicicola SW-3 was measured by MTT assay. The cytotoxic activity against human cancer cell line was detected in the culture filtrate of A. brassicicola SW-3, but no activity found in mycelium. Antitumor substance was isolated from the culture broth by ethyl acetate extraction and purified by silica gel column chromatography. Structure of the purified compound was analyzed by the instrumental analysis such as $^1$H-NMR, $^{13}$ C-NMR and IR spectroscopy. The purified fungal metabolite of an A. brassicicola SW-3, consists of 11 carbon chain with two hydroxyl groups and two epoxides which is identical to depudecin. The $IC_{50}$/ values of the active compound identified as depudecin were $69\mu$g/mL and $57\mu$g/mL against mouse melanoma B16BL6 cell line, and human hepatoma SK-HEP1 cell line, respectively.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.73-104
• /
• 2007

Centering around ruins recognized of being relatively early stage related to flat tile and brick, excavated in Silla capital area, the study attempted elementary approach to seek the appearance time of every remain through comparing them from the excavated cases and production methods of Short beating, Medium beating plate, Long beating plate and Stamped-roof tile. Gyeongju began to use the short beating plate made of tile-less plates or tile plate and increased its quantity. That is deemed to be due to efficiency of beating plate making methods, and moreover to be limited only for use in the palace castle and offices. That is, making short beating plates is presumed to be made merely under some definite objectives. Medium beating plate has been spread to the whole country since Silla and Baekje united. Differently from Koguryo and Baekje, Silla had its unique Beating-plates making technology available for mass-production, which was spread to the whole country and resulted in disappearing of Koguryo and Baekje technology. Long beating plate was not nearly founded in Gyeongju area, but flat tile and common tile excavated in Sachunwang Temple site and Samrang Temple 3rd remains are known. In the outskirts of Gyeongju, long beating plate appeared between the latter half of 8C and the beginning of 9C. Until now, different views have raised to appearance of long beating plate of Unified Silla, which is expected to be clarified under the situation excavated by position relations. Stamped-roof title in Gyeongju is estimated as used after the datum point year 679. While in Baekje area, five stems and branches were involved, in Silla area, code or sign was shown much. The difference between two areas would be due to each other factory, and especially the marked contents werenot letters, which means it had been changed from Baekje s existing-methods. That is, it says the production environment changed owing to Silla's merging. And stamped-roof tile was temporarily used in Gyeongju but soon disappeared, which was because Silla beating plates made under cylinder-shaped tile barrel(圓筒瓦桶) and hitting-pressing of Medium beating plate had beenspread to the whole country, so the production technology of Koguryo and Baekje was naturally dismissed. In consequence, the mergence by Silla brought about unification of each nation's special technology.