• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1263-1264
• /
• 2015

본 논문에서는 PDL 기반 인터리빙 가능한 2차 Solc형 광유 간섭 필터를 제안하며, 출력되는 투과 스펙트럼들을 이론적으로 분석 및 실험적으로 측정하였다. 제안된 필터에서 각각의 구성요소는 편광 빔분배기, 반파장판, 그리고 복굴절이 큰 광섬유로 이루어진다. 이전의 Solc형 2차 광섬유 필터에서 복굴절이 큰 광섬유들은 특정한 각도로 융착 결합되어 편광 제어에 한계가 있었지만, 제안된 구조에서는 복굴절이 큰 광섬유 사이 반파장판을 삽입하여 주축의 각도 및 편광 제어를 유연하게 설정하여 출력 투과 스펙트럼들의 스위칭 특성을 유도하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.1
• /
• pp.27-35
• /
• 1999

The corneal power and eye refraction error were studed in 472 unaccommodated right eyes of Korean adult human aged above 20 years. The mean corneal refractive power is 44.08D (female : 44.28D, male : 43.76D). It is 1.1D higher than that of the medel eye by Gullstrand (about 43.0D). The mean corneal power of myopia(44.11D) is similar that of emmetropia(43.97D) and hyperopia(44.24D), but mean corneal power of myopia between the ages of 20 and 29 is 1.42D higher than that of emmetropia. The corneal powers as a function of ages are enlarged with increasing rate of 0.2D~0.3D/10years.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.565-570
• /
• 2017

The various techniques proposed previously to obtain a good antireflection(AR) coating induce a scattering of incident light by nanoparticles or control the refractive index by using different materials. This paper compares a suggested graded index profile with the quintic index profile previously suggested for producing an index profile that gives good performance from an AR coating. We assume the structure of the AR coating has three, six, and nine layers with 180 nm total thickness. The wavelength of incident light ranges from 300 nm to 1100 nm. We use the transfer matrix theory for a single layer to obtain the reflectivity of three, six, and nine layers. The reflectivity of two different index profiles with three, six, and nine layers is compared. As a result, the suggested graded index profile shows lower reflectivity than the quintic index profile with three layers, especially in the wavelength range from about 600 nm to 1100 nm. Therefore, we expect that these results can be applied to optical devices and filters in the range from visible(red) to near infrared.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.193-195
• /
• 2011

본 논문에서는 광통신 시스템의 통신용량을 제한하는 요소인 도파로 분산을 광통신 시스템에서 사용하는 슬랩도파로을 이용하여 시뮬레이션을 수행하였다. 시뮬레이션 결과 필름층과 기판층의 굴절율 차가 0.02인 경우에는 음의 분산이 발생하였고, 필름층과 기판층의 굴절율 차가 0.1인 경우에는 양의 분산과 음의 분산 모두가 발생하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2010

Purpose: To assess the reliability for measuring the back vertex power of soft contact lenses by dry blotting and wet cell method using an auto-lensmeter. Methods: The soft contact lenses used for measurement were 5 types that were distributed in Korea, and 4 back vertex powers (-1.50D, -3.00D, -6.00D, -9.00D) were used. and repeatability and reproducibility were evaluated by measuring them with an auto-lensmeter by two examiners. Results: Measured powers by dry blotting method were ranged in mean differences from 0.03D to 0.18D for overall lenses, 0.10D to 0.18D for silicone hydrogel lenses, 0.03D to 0.08D for hydrogel lenses. The mean differences between two examiners were less than 0.10D, and the inter-examiner reproducibility was good for dry blotting method. The mean difference between powers determined by wet cell method were 0.09D to 0.69D, the mean differences between two examiners were 0.02D to 0.59D. The reliability of measurements and inter-examiner reproducibility were less than dry blotting method. Conclusions: The reliability of measurements for all materials was better in dry blotting than wet cell method, the re liability of measurements for silicone hydrogel lenses was low in both methods. In clinical practical which requires quick checking of back vertex power using an auto-lensmeter. dry blotting method is thought to be more efficient than wet cell one.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.435-440
• /
• 2016

The aim of study was to provide the preliminary data to find out characteristics of the difference between both refractive errors through analysis of ocular components variation. We measured spherical equivalent power and corneal radius with KR-8800, and axial length and anterior chamber depth with IOL Master, and the difference of measuring values between the right eye and left eye was applied as the absolute values in 100 adults aged 20~59 years. In all participants, the most common results showed that spherical equivalent power was $-1.83{\pm}2.17D$, axial length was 23.00~24.99mm, corneal radius was 7.50~7.89mm, and anterior chamber depth was 3.60~4.09mm. There are significant correlations between both eyes in axial length and anterior chamber depth with the difference of both spherical equivalent power. The difference of both axial lengths was the biggest with the difference of both refractive errors, and shown the highest correlation. The convergence complex study through classification by aspects is needed since the difference of both refractive errors is closely related with ocular components variation, and poor visual function would be caused by the difference of both refractive errors.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.211-215
• /
• 2006

평면 광도파로 코어로 사용되는 SiON (Silicon oxynitride)과 클래딩으로 사용되는 $SiO_2$ (Silicon oxide)의 굴절률 차이가 2.5 %인 고굴절률차 평면 광도파로용 SiON 박막을 PECVD (plasma enhanced chemical vapor deposition)로 제작하였다. PECVD에 사용된 가스는 $SiH_4,\;NH_3,\;N_{2}O$이고, Si 기판의 $SiO_2$ 막은 100 nm이다. 가스의 비율에 따라 SiON 막의 굴절률은 633 nm의 파장에서 1.476에서 1.777까지 변화하였다. 코어로 사용되는 SiON의 두께는 $2.5{\mu}m$이고 클래딩과의 굴절률 차이는 2.5 %였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.90-93
• /
• 1997

고주파 반응성 스퍼터링 방법을 사용하여 희토류가 첨가된 SiO$_2$ 박막을 제작하여 특성을 조사하여, 양질의 희토류 원소가 첨가된 SiO$_2$ 박막의 최적의 제작조건을 도출하고 Er-Al:SiO$_2$ 박막의 소자웅용 가능성에 대하여 조사하였다 열처리전의 Er의 농도는 EDS(Energy dispersing x-ray spectrometer)로 측정한 결과 0.77% 로 농도를 나타내었고 코아층 첨가된 Er은 균일하게 분포되었다 크레드층의 굴절률은 633nm의 파장에서 측정하였을때 1.458이였고 코아층의 굴절률은 동일 파장에서 1.757이였다. 굴절률 분포도 (Refractive Index Profile)는 계단형 굴절률 분포로 코아층/클래드 굴절률 차 $\Delta$n$_{ESI}$ = 0.1였다.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.18-25
• /
• 2005

We derive refraction statics for seismic data recorded in a hard rock terrain, in which there are large and rapid variations in the depth of weathering. The statics corrections range from less than 10 ms to more than 70 ms, often over distances as short as 12 receiver intervals. This study is another demonstration of the importance in obtaining accurate initial refraction models of the weathering in hard rock terrains in which automatic residual statics may fail. We show that the statics values computed with a simple model of the weathering using the Generalized Reciprocal Method (GRM) and the Refraction Convolution Section (RCS) are comparable in accuracy to those computed with a more complex model of the weathering, using least-mean-squares inversion with the conjugate gradient algorithm (Taner et al., 1998). The differences in statics values between the GRM model and that of Taner et al. (1998) systematically vary from an average of 2ms to 4ms over a distance of 8.8 km. The differences between these two refraction models and the final statics model, which includes the automatic residual values, are generally less than 5 ms. The residuals for the GRM model are frequently less than those for the model of Taner et al. (1998). The RCS statics are picked approximately 10 ms later, but their relative accuracy is comparable to that of the GRM statics. The residual statics values show a general correlation with the refraction statics values, and they can be reduced in magnitude by using a lower average seismic velocity in the weathering. These results suggest that inaccurate average seismic velocities in the weathered layer may often be a source of short-wavelength statics, rather than any shortcomings with the inversion algorithms in determining averaged delay times from the traveltimes.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.501-510
• /
• 2003

Several geophysical surveys(electrical resistivity, electromagnetic, seismic refraction, CPR) were conducted to primarily investigate the gallery and the geomembrane at an abandoned mine(Imcheon mine). The subsurface structure mapped from seismic refraction survey mainly consists of three velocity layers(>1000 m/s, 1000∼2000 m/s,＜2000 m/s). Top of the bedrock, whose velocities exceed 2000 m/s, appears to be at depth of 7.5∼10m. Higher resistivities (of ten thousands-hundred of thousands ohm-m) are interpreted to be associated with a open(cavities) gallery. The events at depth of approximately 0.5∼0.7m in GPR sections are probably caused by high-density-poly-ethylene geomembrane. Taking into consideration of the differences in the spatial resolution between georadar and electrical surveys, the events of geomembrane correspond to the top of the high resistivities at depth of about 2m. The segments, characterized with the higher conductivities in the electromagnetic data and the lower resistivities in the electrical resistivity data, are probably associated with surface water or tear zone of geomembrane.