• Physical Therapy Korea
• /
• v.9 no.4
• /
• pp.45-52
• /
• 2002

이 연구의 목적은 수직착지시 성에 따른 슬관절 가동범위의 차이를 알아보는 것이다. 연구 대상자는 20대의 건강한 성인 48명(남자 25명, 여자 23명)이었다. 연구 대상자에게 40 cm 높이에서 한발로 뛰어내리도록 하고, 2차원 동작측정 기구인 CMS-HS를 이용하여 수직착지시 슬관절의 굴곡각도, 최대 슬관절 굴곡각도, 슬관절의 가동 범위, 각속도를 측정한 후, 남 여 두 집단간의 차이를 알아보았다. 이때 사용한 분석방법은 독립적인 두 표본 t-검정이었으며 축차적(stepwise) 다변량회귀분석을 이용하여 체중과 신장을 조절한 상태에서 남여 간에 차이가 있는지를 분석하였다. 그 결과 수직착지시 슬관절의 굴곡각도에서는 유의한 차이를 보이지 않았으나, 최대 슬관절 굴곡각도, 슬관절의 가동 범위, 각속도에는 유의한 차이가 있었다(p<.05). 체중과 신장이 조절된 조건 하에서 여자는 수직착지시 최대 슬관절의 굴곡각도와 슬관절의 가동범위가 남자보다 작았다. 이러한 결과를 통하여 수직착지시 여자가 남자보다 슬관절 손상의 빈도가 높은 이유 중의 하나는 여자가 슬관절을 덜 굴곡시킴으로 인해 바닥의 충격을 더 많이 받기 때문이라는 가능성을 발견하였다.

• Composites Research
• /
• v.29 no.1
• /
• pp.33-39
• /
• 2016

In this study, geometric modeling and finite element analysis of 3-dimensional plain weave composite unit cell consisting of 3 interlaced fiber tows and resin pocket were performed to predict effective properties. First, tow properties were obtained from micro-mechanics finite element unit cell analysis, which were then used in the meso-mechanics analysis. The effective properties were obtained from a series of unit cell analyses simulating uniaxial tensile and shear tests. Analysis results were compared to the analysis and experimental results in the literature. Various crimp angles were considered and the effect on the effective properties was investigated. Initial failure strengths and failure sequence were also examined.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.169-174
• /
• 2009

We conducted structural analysis to investigate disadvantage of wire-mesh arranged at the plane and to develop three-dimensionally bent U-type wire-mesh. In all case that distributed loading at the whole top slab and the half top slab, and the wire mesh was bent $45^{\circ}$, flexura tensile stress was the fewest in both positive moment and negative moment, and the wire mesh was bent $45^{\circ}$ in crossway the shear stresss was the fewest. Therefore, by arranging wire-mesh with $45^{\circ}$ more bent than plane, flexura tensile stress, shear stress, displacement will be reduced and structural function will be improved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.679-690
• /
• 2017

The purpose of this study was to investigate the relationship between neck posture and range of motion and neck disability index(NDI) in young adults with reduced cervical lordosis. This study selected 34 young adults with cervical lordosis reduced (Cobb's angle less than 35 degrees). The assessor measured neck flexion, extension, left lateral flexion, right lateral flexion, left rotation, right rotation and forward displacements of all subjects using cervical of range motion instrument, Then, the NDI was evaluated. After all assessments, degree for cervical lordosis was divided into two groups: bottom group(severe cervical lordosis) and top group(mild cervical lordosis). The bottom group was significantly higher in Cobb's angle, extension, left lateral flexion, right lateral flexion, left rotation, right rotation and forward displacement compared to the top group (p<.05). There was no significant difference between the two groups in flexion, NDI(p >.05). In comparison of subscale of NDI, top group was significantly higher in pain, lifting, and headache than bottom group (p <.05). In correlation analysis, Cobb's angle showed significant positive correlation with flexion, extension, left lateral flexion, right lateral flexion, left rotation and right rotation(p<.05), and showed significant negative correlation with forward displacement, NDI(p<.05). Cobb's angle showed a significant negative correlation with pain, lifting, and headache of subscale of NDI(p<.05). The findings of this study potentially suggest that neck posture may affect the cervical range of motion and pain.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1104-1106
• /
• 1987

본 논문은 한글 자모 인식에 관한 새로운 방법을 제시한다. 본 연구는 한글패턴을 독립된 자소의 부분패턴으로 나누어서 특정점들(끝점, 7굴곡점, T굴곡점)을 추출하여 각 굴곡점에서 연결되는 점과의 벡터를 글자의 크기에 관계없도록 하기 위해 크기가 1인 단위벡터를 구한 후 이들의 합성벡터를 생성한다. 생성된 합성벡터들의 수, 벡터들이 지준축과 이루는 각, 그리고 특정점들의 수로부터 한글의 기본 자모를 분류하는 과정을 연구하였다. 입력된 한글패턴은 이미 세선화가 된 자모패턴으로 하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.2
• /
• pp.339-348
• /
• 2009

This study is to examine effects of motorized flexion-distraction treatment on the pain, lumbosacral angle, lumbar lordosis angle, and lumbar 5 (L5) intervertebral disc angle in patients with chronic low back pain. We selected 30 cases of chronic low back pain, which were evenly divided into two groups: experimental group and control group. We applied the same hot pack, interferential current therapy, and ultrasound therapy to both groups. The experimental group had additional treatment of motrized flexion-distraction therapy and control group had additional of stretching exercise. For each subject, the pain, lumbosacral angle, lumbar lordosis angle, and lumbar 5 (L5) intervertebral disc angle were measured before and after treatment, While experimental groups showed significant improvements after treatment, more significant effects were found in the experimental group.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2008

This study analyzed the rear foot angle of the supporting leg and the anatomical rotation angle of the kicking angle in soccer instep kick and drew conclusions as follows. When the supporting leg was landing on the ground, the valgus angle of the ankle joint reached the maximum peak, and plantar flexion was slightly different in the timing of the maximum peak between the two groups. The flexion angle of the rear foot was statistically significantly different between the two groups, and the movement of the crus on the landing of the supporting foot did not show a statistically significant difference between the groups. The crus leaned backward most before the impact, and the side to side gradient of the crus on impact was $22^{\circ}$. The flexion/extension of the hip joint of the kicking leg reached the maximum peak when the supporting foot was landing on the ground, and at the moment, the maximum extension angle of the hip joint was over $30^{\circ}$. The flexion angle of the knee joint of the kicking leg was largest after landing. While the maximum plantar flexion angle and maximum valgus angle of the ankle joint were not significantly different between the two groups, the maximum external rotation angle was significantly different.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.800-806
• /
• 2011

The objective of this study was to identify the effect of lumbar lordotic curve adjustment on head and neck posture in older adults. Methods Twenty healthy older participants (mean age 71.32) were photographed while watching monitor in sitting with or without lumbar roll support(length 28cm, diameter 10cm). The upper cervical angle and lower cervical angle were measured using the NIH ImageJ 1.32. Comparisons between upper and lower cervical angle with or without lumbar roll support were made using paired-t test analysis. Results Subjects demonstrated a significant difference in the mean upper and lower cervical angle. Mean difference of the upper cervical angle was about $2.83^{\circ}$ with and without lumbar roll support(p<0.005). Mean difference of the lower cervical angle was about $4.44^{\circ}$ with and without lumbar roll support(p<0.0001). Conclusions This study showed that healthy older adults demonstrated more ability to maintain an upright posture of cervical spine during lumbar lordotic curve maintenance with lumbar roll support than without lumbar roll support. When the clinicians consider improvement of the head and neck posture in older adults, they must incorporate adjustment in the lumbar region.

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.13-18
• /
• 1998

SMC(Sheet molding compound)욕조 생산시 발생하는 폐 FRP를 보강재로서 재활용하기 위하여 불포화 폴리에스테르 매트릭스 수지에 보강하고 보강재와 매트릭스 수지의 계면 결합력을 증진시키기 위하여 보강재를 실란계 커플링제[3-methylacryloxyviny1 silane (MAOS)]로 전 처리하여 복합재를 제조하고 기계적 물성 및 계면현사에 대하여 관찰하였다. 보강률이 20wt%인 복합재의 굴곡강도 및 굴곡탄성률이 각 각 110MPa, 8.0GPa로 가장 우수하였으며 커플링제(MAOS)의 노동가 0.50wt%인 복합재의 굴곡강도 및 굴곡탄성률은 약 10%정도 향상되어 각 각 120MPa, 9.2GPa을 나타내었다. 또한 주사전자현미경 관찰 결과 보강재를 커플링제(MAOS)로 처리한 복합재의 보강재와 매트릭스 수지는 물리, 화학적을 잘 결합하여 보강재와 매트릭스 수지의 계면에서 pull out현상이 확인되지 않았으며 크랙도 발생하지 않았다.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.268-276
• /
• 2010

This study was to investigate the knee joint flexion angle and the foot pressure during climbing with different slope. The 24 healthy subjects were participated. And foot pressure was investigated using Parotec system. The knee joint flexion angle were filmed to using a video camera on each slope($0^{\circ},\;3^{\circ},\;6{\circ},\;9^{\circ}$). And knee joint angle was investigated by Dartfish. The data were analyzed ANOVAs. In conclusion, there was significantly different that knee joint flexion angle related on each slope angle. In foot pressure, there was significantly different in lateral heel area(1 cell), medial midfoot area(9 cell), medial forefoot area(15, 16 cell) of left foot, and in lateral heel area(3 cell) of right foot. There was significantly different of foot pressure in lateral and medial heel when knee joint flexion angle is between $10^{\circ}$ and $20^{\circ}$. There was change of gait cycle according to walking slop angle increasing, and the initial contact phase was shorter, the foot pressure in lateral heel was lower.