• Title/Summary/Keyword: 군연소

Search Result 77, Processing Time 0.027 seconds

Heat Release Characteristics of Typical Live Fire Load in Bookstore (화재 최성기에서의 서점 적재가연물의 연소성상)

  • Nam, Dong-Gun;Yuji, Hasemi
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2009.04a
    • /
    • pp.385-388
    • /
    • 2009
  • 건축물의 적재가연물 특성은 성능위주 화재안전설계를 수행함에 있어 중요한 인자이다. 본 연구에서는 서점의 성능위주 화재안전설계에 이용할 목적으로 적재가연물을 대상으로 연소발열성상을 측정하기 위한 화재실험을 행하였다. 실험에서는 서적과 서가의 일부분을 재현한 시험체를 내화로에 넣고 ISO834 표준가열곡선에 따라 가열하여 화재 최성기에서의 연소성상을 파악하였다. 그 결과, 서적은 외부 가열을 받으면 표면연소 후에 탄화하여 주위에 고온이 형성되어도 열분해가스의 방출량이 증가하지 않는 것으로 파악되었다.

  • PDF

Analysis of Forest Fire Conditions on Forest Structure Changing Annually (산불연료 조건에 따른 산불특성 분석)

  • Kwon, Chun-Geun;Lee, Si-Young;Lee, Hae-Pyeong
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2011.04a
    • /
    • pp.421-425
    • /
    • 2011
  • 산불연료 조건에 따른 산불특성 분석을 위하여 산불피해의 조사지역은 2009년, 2010년 산불이 발생했던 강원도 고성지역과 양양지역, 강릉지역과 삼척지역을 조사 대상지역으로 선정하였으며, 고성군의 경우 활엽수림이 4개소, 칩엽수림 1개소, 양양군은 침엽수림이 3개소, 삼척시의 경우는 침엽수림이 2개소, 강릉시의 경우 침엽수림이 3개소 총 13개소를 각각 대상지로 선정하였다. 산불사례 현장조사를 통해 임목고사여부, 편면연소, 수간피해율, 수관피해율 등의 산불피해 특성을 분석한 결과 연료의 임상구조에 따른 편면연소율은 침엽수림은 67.4%, 활엽수림 47.9%로 침엽수림의 편면연소율이 활엽수림보다 19.5% 더 피해를 받는 것으로 나타났으며, 수관피해율은 침엽수림은 51.1%, 활엽수림 44.2%로 침엽수림의 수관피해율이 활엽수림보다 6.9% 더 피해를 받는 것으로 나타났다. 또한 임목고사율은 침엽수림은 44.0%, 활엽수림은 42.3%로 침엽수림의 임목고사율이 활엽수림보다 1.7% 더 피해를 받는 것으로 분석 되었다.

  • PDF

Effect of droplet length on a burning constant rate of suspended droplet (액적간격이 고정액적의 연소율상수에 미치는 영향에 관한 연구)

  • Han, Jae-Seob;Kim, Seon-Jin;Kim, Yoo
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.6 no.1
    • /
    • pp.47-54
    • /
    • 2002
  • This paper presents the results of an experimental investigation on the combustion of single droplets and 1-D droplet arrays of jet A-1 fuel droplets in atmospheric pressure. Experimental results indicate that burning rate constants$({\kappa}_c)$ of jet A-1 fuel droplets were independent of initial droplet size as $0.915{mm}^2$/sec. It was acquired a general relationship expressing the variation of $d^2$ with time for droplet burning For 1-D droplet arrays $(l/d_o$=1.208{\sim}2.922)$/TEX>, the burning rate constant ${\kappa}_c$ decreased with decreasing droplet spacing $l/d_o$ and, The effect on combustion rate constant ${\kappa}_c$ was stronger to second fuel droplet than third fuel droplet with uniform droplet distance

Heat Release Characteristics of Typical Live Fire Load in Large Bookstore (대형서점 적재가연물의 초기 연소발열성상)

  • Nam, Dong-Gun
    • Fire Science and Engineering
    • /
    • v.25 no.2
    • /
    • pp.88-94
    • /
    • 2011
  • Heat release characteristics of live fire load are an important parameter for performance oriented fire safety design of a building. While investigations have been carried out on the fire load and its burning behavior in office, residential and commercial buildings and so on, little effort has been paid for the rational treatment of fire load in bookstore. In this report, burning behavior of typical combustible objects in bookstore are studied by measuring heat release rates of bookshelf with book. Based on the results, it has reviewed fire safety when a fire accident occurs on the large bookstore and suggested peak heat release rate per burning surface, fire growth rate, etc of the live fire load required for fire safety design in bookstore.

Analysis of Forest Fuel Quality by Forest Fire Damage (산림연료 특성별 산불피해도 분석)

  • Kwon, Chun-Geun;Lee, Si-Young;Lee, Myung-Woog;Lee, Hae-Pyeong
    • 한국방재학회:학술대회논문집
    • /
    • 2011.02a
    • /
    • pp.196-196
    • /
    • 2011
  • 산림연료 특성별 산불피해도 분석을 위하여 산불피해의 조사지역은 2009년, 2010년 산불이 발생했던 강원도 고성지역과 양양지역, 강릉지역과 삼척지역을 조사 대상지역으로 선정하였으며, 고성군의 경우 숲구조가 유령림인 활엽수림이 2개소, 칩엽수림 1개소, 장령림인 활엽수림 2개소로 총 5개소, 양양군은 숲구조가 유령림인 침엽수림이 1개소, 장령림 침엽수림 2개소 총 3개소, 삼척시의 경우는 숲구조가 유령림인 침엽수림이 1개소 외 대조구 장령림 침엽수림 1개소, 강릉시의 경우 숲구조가 장령림인 침엽수림이 3개소 총 13개소를 각각 대상지로 선정하였다. 산림연료 특성별 산불피해도를 조사하기 위한 조사지 규모는 $10m{\times}10m$로 하였으며, 현장 조사 항목은 조사지내의 산불피해 상태, 조사지 지형특성으로 나누어 조사를 실시하였다. 산불피해 상태는 산불진행방향, DBH, 총수고, 지하고, 고사여부, 편면연소, 밀도, 수간피해율, 수관피해율 등을 조사하였고, 조사지의 지형특성을 알아보기 위해 조사지의 위치(GPS), 해발고도, 사면방위, 산지경사, 지형을 조사하였다. 현장조사를 위한 조사장비로는 조사지의 지형도, 야장, 디지털 카메라, GPS, 수고측정기, 직경테이프, 캘리퍼, 50m 줄자 2개, 2m 폴대, 클리노메타, 바인더끈 등을 사용하였다. 산불사례 현장조사를 통해 임목고사여부, 편면연소, 수간피해율, 수관피해율 등의 산불피해 특성을 분석한 결과 연료의 특성별 유령림과 장령림의 편면연소율은 유령림은 97.3%, 장령림은 16.5%로 유령림의 편면연소율이 장령림보다 80.8% 더 피해를 받는 것으로 나타났으며, 수관피해율은 유령림은 95.4%, 장령림은 19.9%로 유령림의 수관피해율이 장령림보다 75.5%더 피해를 입은 것으로 조사 되었다. 또한 임목고사율은 유령림은 73.8%, 장령림은 24.5%로 유령림의 임목고사율이 장령림보다 49.3% 더 피해를 받는 것으로 분석 되었다.

  • PDF

A Study on the Burning Characteristics of Interior Boards and Louvers (내장용 판재 및 루버의 연소발열특성 연구)

  • Nam, Dong-Gun;Kim, Sung-Chan
    • Fire Science and Engineering
    • /
    • v.28 no.2
    • /
    • pp.34-39
    • /
    • 2014
  • It is necessary to enhance its availability and reliability of performance based fire design of building with various type of database such as experiments, survey and fire properties and so on. In order to utilize to the performance based fire design, the present study has been performed a series of experiments to investigate the burning characteristics of building materials for two types of interior board and three types of interior louver. The burning test has been also conducted for different thickness because it may show different characteristics of burning behavior such as flame spread rate and flame propagation time. The result shows that the effective heat release per unit mass of interior materials were almost constant with 15.3~16.9 MJ/kg regardless of its thickness while the peak heat release rate and maximum $CO_2$ concentration was varied with thickness.

A Study on Combustion Characteristics of Wood Biomass for Cogeneration Plant (열병합 발전소용 목질계 바이오매스의 연소 특성에 관한 연구)

  • Ryu, Jeong-Seok;Kim, Ki-Seok;Park, Soo-Jin
    • Applied Chemistry for Engineering
    • /
    • v.22 no.3
    • /
    • pp.296-300
    • /
    • 2011
  • In this work, various wood biomasses were used to determine the combustion characteristics for the fuel of cogeneration plant. Combustion characteristics of four types, i.e., (i) forest products, (ii) recycled wood, (iii) empty fruit bunch, and (iv) palm kernel shell, were examined via thermal gravimetric analyzer (TGA) in air atmosphere and coal was used as a comparison group. From the TGA results, the combustion of the wood biomass was occurred in the range of 280 to $420^{\circ}C$, which was lower than that of coal. Forest product showed the lowest activation energy (0.4 kJ/mol) compared to that of other wood biomasses (about 6 to 14 kJ/mol) and coal (64 kJ/mol). In addition, the reaction rate constant of the wood biomass was lower than that of coal. These results indicate the higher combustion initiation rate of wood biomass due to the high content of volatile matter, which had a low boiling point.

Experimental Study on Combustion Characteristics of Live Fire Load in a Bookstore (서점의 적재가연물의 연소특성에 관한 실험적 연구)

  • Nam, Dong-Gun
    • Fire Science and Engineering
    • /
    • v.25 no.5
    • /
    • pp.47-53
    • /
    • 2011
  • Fire load in buildings greatly contribute to the time and scale of fire according to the type and quantity of the fire load. Because bookstores have a large quantity of fire load compared with other buildings which may lead to large scale fires, however, their heat release characteristics have been hardly investigated. In this study, to obtain the data applicable for the performance-based fire safety design of bookstores, the specimens representing stacked fire loads were heated in a furnace in compliance with the standard heating curve of ISO834-1:1999 to investigate their heat release characteristics. From the experiment result, the combustion velocity and heat release rate required for performancebased fire safety designs are obtained.

The Effects of Spray Parameters on the Flame and Spray Characteristics for Liquid Fuel Spray Flame (액체연료 의 분사연소시 분사조건 이 화염 과 액적군 의 성질 에 미치는 영향)

  • 김호영
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.8 no.3
    • /
    • pp.201-209
    • /
    • 1984
  • In order to examine the effect of initial spray condition on the spray combustion mode and flame characteristics, theoretical analysis was carried out to predict combustion mode and flame structure for various initial distribution of droplets in spray. A system of conservation equations of spray flame in two dimensional axisymmetric for two phase flow was solved by a discrete element method for n-Butylbenzen (C$_{10}$ $H_{14}$). As a results of present study, there are two principal group combustion modes that may occur independently for various initial group combustion numbers in a spray burner. These group combustion modes are termed as an external and internal group combustion mode. The critical group combustion number between the internal and external group combustion mode and the flame characteristics of those flame are also predicted. These results may be used as a basic data in the designing of new combustors as well as proper operating conditions for spray burners.s.

The effects of non-uniform droplets distribution on the characteristics of group combustion for liquid fuel droplets cloud (비균일 액적분포가 액적군의 집단연소 특성에 미치는 영향)

  • 김호영;전철균
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.11 no.3
    • /
    • pp.479-487
    • /
    • 1987
  • In order to predict the effects of droplets distributions such as number density and droplets size on group combustion characteristics and flame structure for liquid fuel sprays, modifications of group combustions model were made by changing the droplets distributions from uniform to non-uniform. Various droplets distribution models were adopted in this analysis to examine the effect of number density distribution on combustion characteristics and the difference between uniform and non-uniform droplets size distributions for a spherical droplets cloud. As results of present study, hollow droplets could with outer concentrating distribution has shorter total combustion time compare with the case of solid droplets cloud with inner concentrating distribution. Uniform droplets size distribution model predicts the shorter total combustion time compare with non-uniform droplets size distribution model, and the uniform droplets size distribution model may be used to predict the total combustion time for the droplets cloud containing larger initial size of droplets.