• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.26-44
• /
• 2011

The Study was carreid out to see whether the intensity of electromagnetic waves in each floor of a building where the sharing base station has been established is harmful to a human body, and to expect the intensity of the waves in the building. The investigate was performed on both of sharing base station either with many scatterers or without any of them. To satisfy the international standard and the domestic TTA standard, rms for each of the electromagnetic wave of every floor in the building with the station was measured from 3 location of 3 heights(1.1m,1.5m, and 1.7m). Max of the measured rsm from the each of the frequencies in the nine location was confirmed to be 48.12%(the rooftop measured value) at most, compared to the human body protection standard. The value was confirmed to satisfy the human body protection standard for each frequency. And the total value of the calculated exposure indexes for each frequency was determined to be more than 7 times lower at most, which was 0.1445, compared to the 1 standard. Since P value in both of 868MHz and 2.14GHz electromagnetic waves intensity for each base station and floor was less than 0.05, it was revealed to be meaningful, and since R-Sq(adj) value showed a value more than 50%, the regression equation was determined to fully absorb the data information. However, although the P value of both of 868MHz and 2.14GHz electromagnetic waves intensities under the integrating terms of the base station data and the floor data was showed to be less than 0,05, since R-Sq(adj) value of 868MHz electromagnetic waves intensity presented a value smaller than 50%(34.15%), it was determined that the 868MHz electromagnetic waves intensity is very much influenced by an environment with a base station. Because the electromagnetic waves intensity of 2.14GHz show R-Sq(adj) value bigger then 50%(51.8%), The regression equation model of 2.14GHz electromagnetic waves intensity was confirmed to be proper. It also turned out not to be effected by the surrounding environment near a building with the base station and the intensity of electromagnetic waves for each floor of such building was expectable by the regression equation.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.252-260
• /
• 2015

This paper describes the technical background for the Korean wildlife radiation dose assessment code, K-BIOTA, and the summary of its application. The K-BIOTA applies the graded approaches of 3 levels including the screening assessment (Level 1 & 2), and the detailed assessment based on the site specific data (Level 3). The screening level assessment is a preliminary step to determine whether the detailed assessment is needed, and calculates the dose rate for the grouped organisms, rather than an individual biota. In the Level 1 assessment, the risk quotient (RQ) is calculated by comparing the actual media concentration with the environmental media concentration limit (EMCL) derived from a bench-mark screening reference dose rate. If RQ for the Level 1 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 2 assessment, which calculates RQ using the average value of the concentration ratio (CR) and equilibrium distribution coefficient (Kd) for the grouped organisms, is carried out for the more realistic assessment. Thus, the Level 2 assessment is less conservative than the Level 1 assessment. If RQ for the Level 2 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 3 assessment is performed for the detailed assessment. In the Level 3 assessment, the radiation dose for the representative organism of a site is calculated by using the site specific data of occupancy factor, CR and Kd. In addition, the K-BIOTA allows the uncertainty analysis of the dose rate on CR, Kd and environmental medium concentration among input parameters optionally in the Level 3 assessment. The four probability density functions of normal, lognormal, uniform and exponential distribution can be applied.The applicability of the code was tested through the participation of IAEA EMRAS II (Environmental Modeling for Radiation Safety) for the comparison study of environmental models comparison, and as the result, it was proved that the K-BIOTA would be very useful to assess the radiation risk of the wildlife living in the various contaminated environment.

• The Korean Journal of Pesticide Science
• /
• v.16 no.3
• /
• pp.261-266
• /
• 2012

It is common to use many experiment animals to evaluate the toxicity of chemicals including pesticides. For protecting animal, the concepts of 3R (Reduction, Replacement, Refinement) were introduced and in vitro alternatives methods actively have been developed all over the world. Many experimental animals for toxicological tests have been used, so that it is important to establish the alternative methods. In this study, the alternative method using reconstituted human skin model (Keraskin$^{TM}$) was conducted for classification of skin irritation on pesticides. Sixteen formulations selected on the basis of the degree of irritation were treated by Keraskin$^{TM}$ test. The percent of cell viability was measured into the culture medium collected after treatment of the pesticides for 24-72 hrs. The skin irritations of formulations were evaluated by the cell viability. In this study, The 4 formulations with mild irritation in rabbits were evaluated as nonirritant, the 6 formulations with moderate and severe irritation were evaluated as irritant in human skin model test. We suggest that the alternative test using Keraskin$^{TM}$ model could be used as toxicity evaluation for primary irritation index (P.I.I.) score of greater than or equal to 2.1 of pesticides. The further studies should be required to apply for hazardous assessment of pesticides on alternative skin irritation methods because of the interindividual variability of the sensitivity of skin irritation on pesticides.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.375-384
• /
• 2022

The shipping industry is cyclically impacted by complex variables such as various economic indicators, social events, and supply and demand. The purpose of this study was to analyze the operating profit of 13 Korean liner companies over 30 years, including the financial crisis of the late 1990s, the global financial crisis of the late 2000s, and the COVID-19 global pandemic. This study was conducted to also identify factors that impacted the profit ratio of Korea's liner shipping companies according to economic conditions. It was divided into ocean-going and short-sea shipping, reflecting the characteristics of liner shipping companies, and was analyzed by hierarchical multiple regression analysis. The time series data are based on the Korean International Financial Reporting Standards (K-IFRS) and comprise seaborne trade volume, fleet evolution, and macroeconomic indicators. The outliers representing the economic downturn due to social events were separately analyzed. As a result of the analysis, the China Container Freight Index (CCFI) positively impacted ocean-going as well as short-sea liner shipping companies. However, the Korean container shipping volume only impacted ocean-going liners positively. Additionally, world and Korea's GDP, world seaborne trade volume, and fuel price are factored in the operating profit of short sea liner shipping. Also, the GDP growth rate of China, exchange rate, and interest rate did not significantly impact both groups. Notably, the operating profitability of Korea's liner shipping shows an exceptionally high rate during the recessions of 1998 and 2020. It is paradoxical, and not correlated with the classical economic indicators. Unlike other studies, this paper focused on the operating profit before financial expenses, considering the complexity as well as difficulty in forecasting the shipping cycle, and rendered conclusions using relatively long-term empirical analysis, including three economic shocks.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.55-73
• /
• 2024

Unicorn companies are attracting attention around the world as they are recognized for their high corporate value in a short period of time as an innovative business models. Their growth process presents good lessons for the startup ecosystem and have a positive impact on national economic development and job creation. However, previous studies related to unicorn companies are focused on 'event studies' and 'case studies' such as characteristics of founders, environmental factors, business models and success/failure cases of companies already recognized as unicorns rather than a multifaceted approach. The occurrence of unicorn companies and Macroscopic analysis of related factors is lacking. Against this background, this study are considering the characteristics of unicorns examined through previous research and the current status unicorns with a high proportion of technology companies, the purpose was to analyze the impact of the country's technological competitiveness, such as 'technology human resource index', 'R&D index', and 'technology infrastructure index', on the increase in unicorn companies. For statistical analysis, data published by various international organizations, the Bank of Korea, and Statistics Korea from 2017 to 2020 and unicorn company data compiled by CB Insights were used as panel data for 44 countries to be tested by multiple regression analysis. As a result of the study, it was confirmed that the number of science majors had a positive (+) effect on the increase of unicorn companies in the case of technology human resource index, and in the case of R&D index, the total amount of R&D investment had a positive (+) effect on the increase of unicorn companies, while the number of Triad Patents Families and the number of scientific and technological papers published had a negative (-) effect on the increase of unicorn companies. Finally, in the case of technology infrastructure index, it was confirmed that the number of the world's 500th-ranked universities had a positive (+) effect on the increase of unicorn companies. This study is the first to reveal the causal relationship between national technological competitiveness and unicorn company growth based on country-specific and time-series empirical data, which were insufficiently covered in previous studies. and compared to the UN's ranking of the global industrial competitiveness index and the OECD's total R&D investment by country, Korea is considered to have technological and growth potential, while the number of unicorn companies driving growth as leaders of the innovative economy is relatively small, so the research results can be used when establishing policies to discover and foster unicorn companies in the future.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.69-91
• /
• 1990

A major change in tariff rates was made in January 1989 in Korea. The benchmark tariff rate, which applies to about two thirds of all commodity items, was lowered to 15 percent from 20 percent. In addition, the variation in tariff rates among different types of commodities was reduced. This paper examines the economic impact of the tariff reform using a multisectoral general equilibrium model of the Korean economy which was introduced by Lee and Chang(1988), and by Lee(1988). More specifically, this paper attempts to find the changes in imports, exports, domestic production, consumption, prices, and employment in 31 different sectors of the economy induced by the reform in tariff rates. The policy simulations are made according to three different methods. First, tariff changes in industries are calculated strictly according to the change in legal tariff rates, which tend to over-estimate the size of the tariff reduction given the tariff-drawback system and tariff exemption applied to various import items. Second, tariff changes in industries are obtained by dividing the estimated tariff revenues of each industry by the estimated imports for that industry, which are often called actual tariff rates. According to the first method, the import-weighted average tariff rate is lowered from 15.2% to 10.2%, while the second method changes the average tariff rate from 6.2% to 4.2%. In the third method, the tariff-drawback system is internalized in the model. This paper reports the results of the policy simulation according to all three methods, comparing them with one another. It is argued that the second method yields the most realistic estimate of the changes in macro-economic variables, while the third method is useful in delineating the differences in impact across industries. The findings, according to the second method, show that the tariff reform induces more imports in most sectors. Garments, leather products, and wood products are those industries in which imports increase by more than 5 percent. On the other hand, imports in agricultural, mining and service sectors are least affected. Domestic production increases in all sectors except the following: leather products, non-metalic products, chemicals, paper and paper products, and wood-product industries. The increase in production and employment is largest in export industries, followed by service industries. An impact on macroeconomic variables is also simulated. The tariff reform increases nominal GNP by 0.26 percent, lowers the consumer price index by 0.49 percent, increases employment by 0.24 percent, and worsens the trade balance by 480 million US dollars, through a rise in exports of 540 million US dollars and a rise in imports of 1.02 billion US dollars.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

This study was performed to estimate non-$CO_2$ greenhouse gases (i.e., GHGs) emission from biomass burning at a local scale. Estimation of non-$CO_2$ GHGs emission was conducted using Landsat TM satellite imagery in order to assess the damage degree in burnt area and its effect on non-$CO_2$ GHGs emission. This approach of estimation was based on the protocol of the 2003 IPCC Guidelines. In this study, we used one of the most severe fire cases occurred Samcheock in April, 2004. Landsat TM satellite imageries of pre- and post-fire were used 1) to calculate delta normalized burn ratio (dNBR) for analyzing burnt area and burn severity of the Samcheok large-fire and 2) to quantify non-$CO_2$ GHGs emission from different size of the burnt area and the damage degree. The analysis of dNBR of the Samcheok large-fire indicated that the total burnt area was 16,200ha and the size of the burnt area differed with the burn severity: out of the total burnt area, the burn severities of Low (dNBR < 152), Moderate (dNBR = 153-190), and High (dNBR = 191-255) were 35%, 33%, and 32%, respectively. It was estimated that the burnt areas of coniferous forest, deciduous forest, and mixed forest were about 11,506ha (77%), 453ha (3%), and 2,978ha (20%), respectively. The magnitude of non-$CO_2$ GHGs emissions from the Samcheok large-fire differed significantly, showing 93% of CO (44.100Gg), 6.4% of CH4 (3.053Gg), 0.5% of $NO_x$ (0.238Gg), and 0.1% of $N_2O$ (0.038Gg). Although there were little changes in the total burnt area by the burn severity, there were differences in the emission of non-$CO_2$ GHGs with the degree of the burn severity. The maximum emission of non-$CO_2$ GHGs occurred in moderate burn severity, indicating 47% of the total emission.