• 소음진동
• /
• 제8권6호
• /
• pp.1181-1192
• /
• 1998

본 연구에서는 신경조직망을 이용한 항공제어계의 내고장성 성능에 대해 관점을 두었다. 이 내고장성 제어계는 감지기와 작동기의 고장 발견. 확인 그리고 보완으로 이루어진다 SFDIA는 주 신경조직망과 n개의 국소 신경조직망으로 이루어지는데, 여분의 감지기 없이 n개의 감지기로 내고장성 능력을 성취함을 목적으로 한다. 또한, AFDIA는 같은 주 신경조직망과 세개의 신경조직망 제어기들로 구성되며. 이 제어기들은 평형을 유지하는 역할을 하며 고장으로 인한 pitching. rolling. 그리고 yawing moment를 상쇄하는 기능을 한다. 본 연구에서는 특히 잘못된 경보와 고장 확인의 성능이 떨어짐이 없이 SFDIA와 AFDIA의 효과적인 통합 기능을 수행하는데 중점을 두었으며 여러 가지 작동기와 감지기의 고장에 대한 연구 결과가 제시되었다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1255-1263
• /
• 2000

In this study, the modification of turbulent boundary layer flow by local wall vibration is investigated. The wall is locally vibrated using a wall deformation actuator, which moves up and down at the frequencies of 100Hz and 50Hz. Simultaneous measurements of the streamwise velocities in the spanwise direction are performed at several wall-normal and streamwise locations using an in-house multi-channel hot wire anemometer and a spanwise hot-wire-probe rake. The mean velocity is reduced in most places due to the wall vibration and its reduced amount becomes small as flow goes downstream. Interestingly, the mean velocity is found to increase very near the wall and near the actuator. This is due to the motion induced by the streamwise vortices which are generated by the downward motion of the actuator. In case of the streamwise velocity fluctuations, their magnitude increases as compared to the unperturbed turbulent boundary layer, and the increased amount becomes small as the flow moves downstream. The modified flow field at the forcing frequency of 50Hz is not much different from that of 100Hz, except the reduced amount of modification.

• 대한물리의학회지
• /
• 제3권3호
• /
• pp.145-149
• /
• 2008

Purpose : The purpose of this study was evaluate the effects of vibration on joint position sense. Methods : The subjects were divided into vibration group(n=20) and control group(n=20). Vibration group was given local vibration on elbow joint for 15 minutes and control group was given resting 15 minutes by resting position. All subjects of each group were tested pre-post on maximal grip force and joint position sense. Results : Maximal grip force test and joint position sense test of vibration group was showed a significant difference between pre and post(p<0.05). Conclusion : There was a different change on maximal grip force and joint position sense.

• 한국산업보건학회지
• /
• 제33권2호
• /
• pp.103-114
• /
• 2023

Objectives: This study was conducted to evaluate hand-arm vibration (HAV) exposure levels due to the use of power hand tools and to evaluate the determinants in the automobile assembly process. Methods: The exposure level to HAV was evaluated for 30 work lines in five assembly processes (body, engine, chassis, door, and design) that use air-powered tools and battery-powered tools and operate in circulation for two hours. The 2-hr equivalent energy vibration acceleration, A (2), of the task was measured. The 8-hr equivalent energy vibration acceleration, A (8), was estimated in consideration of the number of tasks that can be performed per day by each process. In addition, a survey on the working environment was conducted with workers exposed to vibration. Results: The geometric mean of the HAV exposure level, A (2), for a total of 30 tasks was 2.51 m/s², and one case was 10.30 m/s², exceeding TLV (2hr). The HAV exposure level of A (8) was evaluated from 1.03 m/s² to 5.36 m/s². A (2) showed a statistically significant difference (P<0.01) for each process, and the chassis process (GM=3.90 m/s²) was the highest. The larger the tool size and the longer the tool length, the higher was the vibration acceleration when using a battery-powered tool than an air-powered tool (P<0.01). Battery-powered tool users showed higher dissatisfaction on all items than did air-powered tool users. Conclusions: As a result of this study, it is necessary to implement a program to reduce the HAV exposure levels.

• 대한물리의학회지
• /
• 제3권2호
• /
• pp.75-80
• /
• 2008

Purpose : The purpose of this study was to evaluate the effects of local vibration on quadriceps femoris on vertical jump Method : The subjects(40) were divided into man control group(10) woman control group(10) and man vibration group(10), woman vibration group(10). Vibration group was given vibration on quadriceps femoris for 15 minutes and control group was given resting for 15 minutes. All subjects of each group were tested on vertical jump then pre and post test. Results : 1. Man control group and woman control group vertical jump didn't have statistically difference pre and post test(p>0.05). 2. In the woman vibration group vertical jump didn't have significant difference pre and post test(p>0.05), but had significant difference in the man vibration group(p<0.05) Conclusion : Vibration on quadriceps femoris have an effect on vertical jump. Therefore, the vibration will be effective in treatment of muscle strength.

• 대한물리의학회지
• /
• 제2권2호
• /
• pp.195-203
• /
• 2007

Purpose : The purpose of this study was to evaluate the effects of local vibration on knee joints on ability of postural control. Methods : The subjects(50) were divided into control group(25) and vibration group(25). Vibration group was given vibration on knee joint for 10 minutes and control group was given resting for 10 minutes. All subjects of each group were tested on MFT balance tester board for 30 seconds and MFT Balance Test English 1.7 was used to measure ability of postural control pre and post test. Results : 1. Laterality didn't have statistically significant difference pre and post test in both groups(p<0.05). 2. In the control group Body stability didn't have significant difference pre and post test(p>0.05), but had significant difference in the vibration group(p<0.05). 3. At assessment Movement of COG, sector2 in the control group and sector 1, 5 in the experimental group had significant difference pre and post test(p<0.05). Conclusion : From this result vibration on knee have an effect on Body stability. Therefore, the vibration will be effective in treatment of patients who have disability of postural control.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.426-426
• /
• 2011

최근 들어 금속물질을 나노미터 단위로 구성할 수 있는 기술이 진보하면서, 금속 나노입자에 의해 발생되는 표면 플라즈몬에 대해서도 다양한 분야의 관심이 집중되고 있다. 유전체 물질을 기지상으로 하는 금속:유전체 나노복합체에서 금속 나노입자는 자유전자들의 집단 진동인 국소표면 플라즈몬 공진(Localized Surface Plasmon Resonance, LSPR)현상에 의해 국부전기장을 증대 시키고, 가시광 및 적외선 영역에서 특성 광흡수 거동을 보인다. 이와 같은 광학적 특성은 금속 나노입자들의 크기, 형태, 그리고 나노입자들의 주변을 구성하는 기지상 물질의 종류에 의해 조절된다. 금속:유전체 나노복합체에 나타나는 이러한 특성은 단순장식코팅 뿐만 아니라 광의 효율적 운용과 광을 매개로 한 기능발현을 필요로 하는 디스플레이, 광학 스위칭 소재 및 태양전지의 효율 향상을 위한 광흡수층 등 매우 다양한 응용이 가능하다. 본 연구에서는 다양한 굴절률을 갖는 재료들 중, 저굴절률을 갖는 SiO2와 고굴절률을 갖는 ZnS-SiO2를 기지상 재료로 선택하여 교번증착 스퍼터링법으로 Ag와 Au입자를 형성시켰다. Ag를 금속나노입자로 갖고, SiO2와 ZnS-SiO2를 기지상으로 하는 금속:유전체 나노복합체에서는 금속나노입자 형성에 따른 뚜렷한 표면 플라즈몬 공진 광흡수 피크가 관찰된 반면 Au나노입자는 기지상에 따라 각기 다른 광흡수 특성을 나타냈는데, SiO2기지상에서 명확한 광흡수 피크를 형성했던 경우와는 달리 ZnS-SiO2기지상에서는 특정파장에서의 흡수피크로 규정되기 어려운 넓은 파장범위에 걸친 완만한 광흡수 피크를 나타냈다. TEM 분석을 통해, ZnS-SiO2 기지상 내의 Au입자는 각각 독립되어 있는 Island형태가 아닌 유전체 기지상과 대칭적으로 혼합된 네트워크 형태의 Bruggeman 기하구조를 구성하고 있음을 확인하였고, 이는 Au입자가 형성되고 성장할 때 Au와 S의 높은 결합에너지로 인해 상당한 젖음 특성을 갖고 성장하였기 때문으로 판단됐다. 따라서 나노복합체를 구성하는 물질간의 광학적 특성뿐만 아니라 기지상 내에서의 금속입자의 성장거동에 대한 연구가 수반되었을 때, 금속:유전체 나노복합체의 표면 플라즈몬 공진 광흡수 특성을 보다 정확하게 제어할 수 있다.

• 지역사회간호학회지
• /
• 제13권3호
• /
• pp.574-583
• /
• 2002

'채석(quarrying)'산업은 노천광산에서 광물을 캐내는 작업을 모두 포함하는 광범위한 산업을 의미한다. 1900년대에 들어오면서 채석작업에 홈연소기(channel burner)을 이용한 불꽃절개법(flame cutting)이 이용하여 근로자의 먼지 노출이 많이 감소하였다. 채석작업으로 인한 주 된 건강문제는 먼지, 소음, 진동 노출이며, 노천작업장으로 작업환경이 개방되어 있어 환경측정 및 관리가 불가능하므로 개별근로자의 먼지와 소음 노출 측정 및 예방이 중요하다. 본 연구는 미국의 일개 채석회사의 근로자 건강관리사업을 평가하였다. 연구자료는 저자가 현장 방문을 통하여 구한 자료와 연구대상 회사의 안전관리자의 의견 및 미국 산업안전보건국 전산자료를 이용하였다. 채석사업장에서 이루어지는 작업은 크게 채석작업과 실내에서 이루어지는 가공작업 및 운반과 보관이며, 미국 산업안전보건국(OSHA)의 표준산업분류(SIC)에서 1411(채석업)과 3281(채석가공업)에 해당한다<표 1>. 연구 대상 사업장에서 이루어지는 산업보건프로그램은 먼지 노출 예방을 위해 석재 채취시 물분사법(water jet quarrying)과 국소환기법을 사용하고 소음 노출 예방을 위해 귀마개를 사용하며 사고 예방을 위하여 안전모와 철모, 보안경, 안전조끼, 보호장갑, 안전끈(harness)을 착용하였다. 평가 결과로 나온 연구 대상 사업장에서 적용하여야 할 산업보건 프로그램은 첫째, 먼지 노출로 인한 건강문제를 예방하기 위하여 근로자 개별 노출 측정을 하고, 둘째 실내가공작업장의 근로자를 대상으로 한 먼지와 소음 노출 측정 및 환경측정이 필요하며, 셋째 안전관리를 위해 채석장에 안전표지판을 설치하여야 하며, 실내가공 작업장의 자동이동시스템을 작업별로 채색하여 식별을 용이하게 하여야 하겠다. 또한 이 연구 결과를 영세사업장의 산업간호프로그램인 'Clean 3D'사업에서 적용하여 우리나라 채석사업장 근로자 건강관리를 발전시켜야 하겠다.

• 대한통합의학회지
• /
• 제7권3호
• /
• pp.117-125
• /
• 2019

Purpose : The purpose of this study was to determine the effects of simultaneous application of focal vibration stimulation and task-oriented training on the improvement in upper extremity motor function after stroke. Methods : The study period was from January to April 2019; 23 patients who fulfilled the study eligibility criteria were enrolled. The participants were divided into two groups: the experimental group with vibration stimulation and task-oriented training and the control group with only task-oriented training. Training was conducted in a total of 20 sessions, 5 times a week for 30 minutes a day for 4 weeks. The amount of use of the affected and unaffected side by accelerometers, and Box and Block test (BBT), Action Research Arm Test (ARAT) was measured with a pre-test, a post-test. Wilcoxon Signed Rank Test and Analysis of Covariance were used to compare and analyze the changes within and between the groups. Results : Both the groups showed statistically significant changes in the results of the BBT and the ARAT, as well as the amount of use of the affected and unaffected side. Regarding the use of the affected side, BBT results, and the grasp and gross movement item of the ARAT showed significant changes in the experimental group compared with the control group. Conclusion : We found that simultaneous application of focal vibration stimulation and task-oriented training was more effective than task-oriented training alone. A large-scale comparative study involving a group that is only given vibration stimulation should be conducted for more generalizable results.

• 한국산업보건학회지
• /
• 제6권1호
• /
• pp.1-16
• /
• 1996

This study was conducted at an automobile assembly line located in Kyonggi-do, Korea from January 16 to February 28, 1995. The purposes of this study were to assess worker exposures to hand-arm vibration and the performance of gloves for reduction of vibration. The exposure to vibration was measured using to the ISO 5349(1986) method. Vibration acceleration and frequency spectra for each tool were determined on-line replicating actual working conditions and analyzed together with exposure time for evaluating individual worker exposure. Eight pneumatic hand tools, 60 workers exposured to hand-arm vibration, and three pairs of gloves were involved in this study. Results are summarized as follows. 1. Dominant frequencies of vibration for all tools(n=8) measured in this study ranged from 250 Hz to 800 Hz. 2. There was no significant correleration between dominant frequencies and free running speed (p>0.05). 3. Total predicted exposure times of using impact, hammer type did not exceed 40 minutes, but metal finish task, using grinder and sander exceeded 40 minutes. Total exposure time affected significantly the frequency-weighted, 4 hr equivalent acceleration. 4. Predicted prevalence and observed exposure period data were compared in workers(n=60), according to ISO 5349. In this results, 23(50.0 %) and 24(48.07 %) persons exceeded the mean latency periods for vibration-induced white finger(VWF) at 10 % (n=46) and 50 % (n=52) standards, respectively. On the basis of ISO equation, mean latent periods for VWF were 3.23, 4.72 years at 10 %, 50 % standards, respectively. 5. Reduction of vibration by gloves was evaluated. Since impact pneumatic tools produced low frequency vibrations, conventional gloves did not provide any protection. Gloves A and C amplify somewhat the signal at frequency below 400 Hz; the attenuation increases progressively by frequency to reach 18 dB ($7.94{\times}10^{-6}m/s^2$) at 1,000 Hz, slightly worsening Glove B did not provide any protection and made the situation slightly worse. However, since they make the hands warm, the occurrence of vibration-induced white fingers may be reduced.