• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.3-8
• /
• 1990

본 고에서는 자동차의 냉각장치중, 냉각수를 저장하는 기능을 갖는 surge-tank의 내압에 의한 국부적인 균열 발생 방지 및 용기의 응력환화를 목적으로, 범용 구조해석 프로그램인 CAEDS의 여러 모듈(GEOMOD, GFEM, IFES, OPTISEN)을 이용하여 응력해석을 수행한 후, OPTISEN(최적화 해석 모듈)을 적용하여 용기 두께 및 보강재 위치에 따른 설계민감도를 구하여 최적 두께 및 보강재의 최적 위치를 구하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.528-535
• /
• 2011

In the present, the formation of shear band under a simple shear deformation is investigated using a rate-independent elastic-plastic constitutive relations. Moreover, the strain gradient terms are incorporated to obtain a non-local plastic constitutive relation, which in turn represented using combined two-back stress hardening model. Then, the continuum damage model is also included to the proposed model. The post-localization behavior are studied by introducing a small imperfection in a work piece. The strain gradient affects the shear localization significantly such that the intensity of shear band decreases as the strain gradient coefficient increases when the J2 flow theory is employed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.606-606
• /
• 2012

최근 지구 환경변화에 따른 기후변화의 영향으로 이상홍수 발생의 위험성이 증가하고, 상습적으로 홍수피해가 반복되고 있다. 홍수피해의 원인 중 하나인 하천제방의 붕괴는 월류, 침식, 제체불안정, 구조물에 의한 파괴 등으로 구분되고 이 중 월류 및 침식은 제방 파괴의 주된 원인으로 최근 통계자료에 보고되고 있다. 제방붕괴의 주된 원인 중 하나인 침식파괴로부터 제방을 보호하기 위해 제내지 사면에 호안공을 설치하며, 하천설계기준 해설(2009)에서는 제방 또는 하안을 유수에 의한 파괴와 침식으로부터 직접 보호하기 위해 제방 앞비탈에 설치하는 구조물로 정의하고 있다. 특히 사행하천의 만곡부에서는 제방파괴의 위험성이 높을 뿐만 아니라 국부적으로 집중되는 유속분포는 제방의 안정성을 위협한다. 또한 원심력, 2차류(secondary flow) 등에 의한 수위상승 등에 의해 제방이 파괴되고 월류되어 홍수피해가 발생할 가능성이 큰 취약지점이라고 할 수 있다. 본 연구에서는 2차원 수치모형을 이용하여 만곡부 흐름 특성을 분석하고 수리실험을 통해 측정된 유속 및 수위분포 결과와 비교하여 분석하였다. 또한 수리실험에서 도출된 호안 붕괴 시의 흐름을 구현하여 호안 붕괴 시 국부유속 및 전단응력을 계산하고 만곡부 호안의 안정성을 위한 설계인자를 분석하였다. 연구결과로 제시된 만곡부 안정성을 위한 설계인자는 국외 호안공 설계식과 비교하여 국부유속 및 전단응력의 설계인자의 적합성을 검토하고 국내 만곡부 호안의 안정성 설계기법개발에 도움이 될 수 있는 설계인자를 제시하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.234-242
• /
• 1987

The solution of shape design problems based on variational analysis has been approached by using the domain adaptive method. The objective of the structural shape design is to minimize the weight within a bound on local stress measure, or to minimize the maximum local stress measure within a bound on the weight. A derived optimality condition in both design problems requires that the unit mutual energy has constant value along the design boundary. However, the condition for constant stress on the design boundary was used in computation since the computed mutual energy oscillates severely on the boundary. A two step iteration scheme using domain adaptation was presented as a computational method to slove the example designs of elastic structures. It was also shown that remeshing by grid adaptation was effective to reduce oscillatory behavior on the design boundary.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.250-255
• /
• 2004

In this paper, we established baseline information and insight on residual stress relief mechanism associated with furnaced and local PWHT(post weld heat treatment) operation. Based on FEM analysis results, we suggested that furnaced PWHT stress relief mechanism was based on creep relaxation and local PWHT stress relief mechanism involved complicated interactions between plasticity and creep. In case of furnaced PWHT, significant stress relaxation was occurred in the early stage of PWHT. In case of local PWHT, stress relaxation magnitude was increased as PWHT time increased. Finally, We have proposed that detailed furnaced and local PWHT procedure, and qualification criteria to support current codes of practices.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.211-216
• /
• 1995

1994년 11월에 나타난 고리 1호기 증기발생기의 전열관 누설에 대한 원인을 조사하기 위하여 인출 전열관의 파손 분석과 슬러지 분석 및 pH 분석 등을 수행하였다. 손상원인은 국부적인 염기도 상승과 부식전위 상승에 따른 2차측 응력부식균열(ODSCC)로 밝혀졌다. 전열관 표면과 접한 관판 상부의 퇴적슬러지 끝단에 형성된 틈새에서 나타나는 비등현상으로 $Na^{+}$ 등의 양이온이 농축하게 되며, Cl$^{-}$ 등의 음이온 증발로 인하여 국부적으로 염기도의 상승현상이 야기되었다. 또한 재 가동시 전열관 표면에 침착된 잔류 구리와 용존산소의 결합으로 부식전위가 상승되었다. 이와 같은 ODSCC 발생환경은 1990년이래 지속적으로 형성된 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.1014-1020
• /
• 2004

The present work complies the elastic stress concentration factor for a pipe with local wall thinning, based on detailed three-dimensional elastic FE analysis. To cover practically interesting cases, a wide range of pipe and defect geometries are considered, and both internal pressure and global bending are considered. Resulting values of stress concentration factors are tabulated for practical use, and the effect of relevant parameters such as pipe and defect geometries on stress concentration factors are discussed. The present results would provide valuable information to estimate fatigue damage of the pipe with local wall thinning under high cycle fatigue.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.73-78
• /
• 2003

The residual stresses and. distortions of structures by welding exert negative effect on the safety of railroad structures. This investigation performs a thermal elasto-plastic analysis using finite element techniques to evaluate residual stresses in butted-welded joint. Considering this initial residual stresses, local stress and strain at the critical location (weld toe) during the loading were analyzed by elastic plastic finite element analysis. Fatigue crack initiation life and fatigue crack propagation life of butt-welded specimen were predicted by local strain approach and Neuber's role and Paris law. It is demonstrated that fatigue life estimates by local strain approach closely approximate the experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.278-288
• /
• 1998

An efficient and useful method to improve the local stress field in a displacement-formulated finite element solution has been proposed using the theory of conjugate approximations for a stress field and the Loubignac's iterative method for a displacement field. Validity of the proposed method has been tested through three test examples, to improve the stress field and displacement field in the whole domain and the local regions. As a result of analysis on the test examples, it is found that the stress field in the local regions are approximated to those in the whole domain within a few iterations which have satisfied the original finite element equilibrium equation. In addition, it is found that the local stress field are by far better approximated to the exact stress field than the displacement-based stress field with the reduction of the finite-element mesh-size.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.707-715
• /
• 2005

Corrugated webs have been used for composite prestressed concrete box girder bridges. Innovative steel plate girders using corrugated webs have been proposed. It has been found that analytical and experimental researches conducted to determine the strength of trapezoidally corrugated webs can fail with respect to three different buckling modes: local, global, and interactive shear buckling. Shear buckling capacity equations based on classical and orthotropic plate buckling theories have been proposed,but these equations show some differences. In this paper, geometric parameters that influence interactive shear buckling behavior with interaction effects are identified via extensive bifurcation buckling analysis using the finite element meth.