• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.285-292
• /
• 2009

It has been observed that, after long term storage, some ammunitions are misfired by tamping (combustionstopping) due to aging of the chemicals loaded in the ammunitions. Used in ammunitions are percussion powder which provides the initial energy, igniter which ignites the percussion powder, and a delay system that delays the combustion for a period of time. The percussion powder is loaded first, followed by the igniter and then the delay system, and the ammunitions explode by the energy being transferred in the same order. Tamping occurs by combustion-stopping of the igniter or insufficient energy transfer from the igniter to the delay system or the combustion-stopping of the delay system, which are suspected to be caused by low purity of the components, inappropriate mixing ratio, size distribution of particulate components, type of the binder, blending method, hydrolysis by the humidity penetrated during the long term storage, and chemical changes of the components by high temperature. Goal of this study is to find the causes of the combustion-stopping of the igniter and the delay system of the ammunitions after long term storage. In this study, a method was developed for testing of the combustion-stopping, and the size distributions of the particulate components were analyzed with field-flow fractionation (FFF), and then the mechanism of chemical change during long term storage was investigated by thermal analysis (differential scanning calorimetry), XRD (X-ray diffractometry), and XPS (X-ray photoelectron spectroscopy). For the ignition system, M (metal)-O (oxygen) and M-OH peaks were observed at the oxygen's 1s position in the XPS spectrum. It was also found by XRD that $Fe_3O_4$ was produced. Thus it can be concluded that the combustion-stopping is caused by reduction in energy due to oxidation of the igniter.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2001.11a
• /
• pp.143-160
• /
• 2001

최근 들어 무선인터넷 및 모바일 컴퓨팅 기술의 급속한 발전과 함께 향후 그 수요가 폭발적으로 증대될 것으로 예상되는 분야가 위치기반서비스(LBS, Location Based Service) 기술이다. 이동통시산업이 발달한 미국 및 유럽의 선진국에서는 지난 수년에 걸쳐 지속적으로 축적되어 온 정보기술을 통하여 현재 수많은 LBS 관련 기술개발이 활발히 진행되고 있다. 1999년 미국의 FCC(미연방통신위원회)는 무선 E119 규칙을 제정하였는데, 이 규칙은 LBS를 주목하게 한 결정적인 계기가 되었다. FCC는 미국내의 망 사업자들이 2001년 10월까지 이동전화 사용자가 응급 호출(911)을 하였을 때 67%는 100M 이내의 위치오차로, 95%는 300M 이내의 위치오차로 응급호출자의 위치정보를 제공해야 한다는 규정을 제정했다. 이때부터 각종 관련 회사들이 생겨나기 시작했으며, 사람들이 LBS에 관심을 가지기 시작하였다. 국내에서도 이동통신사업자 및 IMT-2000 사업자를 중심으로 LBS 도입을 적극 준비하고 있는 상황이다. 그러나 위치정보라는 것은 오래 전부터 사람들이 알고있던 사항이다. 이미 GPS라는 것을 이용하여 국방분야, 환경분야, 교통 및 물류 분야에서 많이 활용되고 있었기 때문이다. 그런데 왜 같은 위치정보를 활용하는 분야인데 LBS는 이토록 많은 관심을 불러일으키는가? 그것에 대한 답변은 바로 위치정보가 이동통신망과 연결되면서 대중적이고 일반적인 서비스가 가능해졌기 때문이다. 특히, LBS는 GIS가 정보통신 기술과 융합되면서 앞으로 추구해야 할 차세대 정보기술 분야라는 점에서 그 의미는 더 크다고 할 수 있다. 평균(平均) 0.322였다. 그리고 RaA를 모핵종(母核種)으로 가정(假定)했을 때 각핵종간(各核種間)의 방사평형비(放射平衡比)는 대개 $C_1>C_2>C_3$인 것으로 나타났다. 여기서 $C_1,\;C_2$ 및 $C_3$는 각각 RaA, RaB 및 RaC의 농도(濃度)를 나타낸다.0cm 깊이에서는 Pythium균(菌)과 Fusarium균(菌)을 제외(除外)하고 모두 14일간(日間)에 사멸(死滅)하였다. 6. 최고(最高)에 달(達)했다가 최저(最低)에 이르는 온도(溫度)의 반복적(反復的)인 파동(波動)이 있는 것에서 없는 것보다 단시간(短時間)에 사멸(死滅)하였다. 이상(以上)의 결과(結果)에서 볼 때 하기고온기(夏期高溫期)의 재배(栽培) 휴한기(休閑期)에 PVC film을 사용(使用)하여 하우스를 밀폐(密閉)하거나 턴널을 만들어서 태양열(太陽熱)을 이용(利用)한 토양소독(土壤消毒)의 가능성(可能性)이 충분(充分)히 있는 것으로 생각된다.종합적(綜合的)으로 볼 때, diazinon 과 decamethrin의 처리(處理)는 포장(圃場)에서 벼멸구의 산란력(産卵力)과 성충수명을 증대(增大)시키고, 식이활동(食餌活動)을 촉진(促進)함으로서 벼멸구의 resurgence를 유발(誘發)하고 아울러 수도체(水稻體)의 hopperbun을 가속화시킬 가능성(可能性)이 있음을 알 수 있었다.는 점차 약하여 졌으나 catalase, invertase는 그 활성도가 일단 숙성중기에 높아졌다가 낮아졌다.n 이 pH 4.2이고 temperature는 $60^{\circ}C$이었다. 그리고

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.2
• /
• pp.149-156
• /
• 2005

The HLA is the simulation architecture standard that the civilian and military simulation communities are deeply interested in. We can find various successful practices applying HLA to constructive simulations such as war games in domestics and overseas. However, any case of real-time distributed simulations has not been reported. The reason is that a message transmission period via RTI in a network layer varies according to computing power, simulation nodes, transmission types, and packet size; further a message processing time in an application layer depends on its processing methods, thus too difficult to set up real-time constraints for the enhancement of a real-time resolution. Hence, in this paper we have studied the real-time constraints of RTI for the development of the M-SAM simulator. Thus we have developed a HLA based pilot simulator using 6 PC's in LAN and then measured and analysed the performance of the RTI. As the results of our work, we could obtain the quantitative values for message delay, RTI overhead and RTI packet transmission ratio by a real operation scenario and loads, which are not shown in the previous works. We also expect that the results can be used as a guideline to set up the number of targets, transmission frequency and message processing method in the development of the M-SAM simulator and similar applications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.38-43
• /
• 2002

A study on the test, design and fabrication of wind tunnel model for measurement of air load distribution on wing surfaces is presented. 447 pressure taps are installed normal to the wing surfaces, and measured by PSI-8400 system using total 8 ESPs modules installed in the model. The test was performed at 50 m/sec constant speed in the low speed wind tunnel of Agency for Defense Development. Tests were carried out to determine effects of angle of attack, angle of sideslip and flap and stores for the load distribution of wing. The test results in this paper can be applied to the design optimization of structure and validation of computational fluid dynamics.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.179-188
• /
• 2010

The concern of Software Product Line(SPL) engineering is spreading widely because the program or product developers are able to satisfy the customer's demands quickly and give a way to handle maintenance efficiently. SPL is a reuse paradigm that reuse common parts and adopts variable parts optionally to form a differentiated product by analyzing domains. Purposes of this paper are to design an architecture which has a dynamic reconfiguration function and to develop basic components which are the basic unit of reconfiguration to raise the reuse level of the guided weapon system using the SPL. Initially we design an architecture and define basic components for developing a dynamic reconfigurable components based on SPL. Then we develop the composer for physical components and behavior components referenced by behavior models of OneSAF.

• Journal of the Korea Society for Simulation
• /
• v.30 no.2
• /
• pp.49-64
• /
• 2021

M&S techniques are widely used as scientific means to systematically develop response plans to chemical and biological (CB) hazards. However, while the theoretical area of hazard dispersion modeling has achieved remarkable practical results, the operational analysis area to simulate CB hazard response plans is still in an early stage. This paper presents a model to simulate CB hazard response plans such as detection, protection, and decontamination. First, we present a possible way to display high-fidelity hazard dispersion in a combat simulation model, taking into account weather and terrain conditions. We then develop an improved vulnerability model of the combat simulation model, in order to simulate CB damage of combat simulation entities based on other casualty prediction techniques. In addition, we implement tactical behavior task models that simulate CB hazard response plans such as detection, reconnaissance, protection, and decontamination. Finally, we explore its feasibility by analyzing contamination detection effects by distributed CB detectors and decontamination effects according to the size of the {contaminated, decontamination} unit. We expect that the proposed model will be partially utilized in disaster prevention and simulation training area as well as analysis of combat effectiveness analysis of CB protection system and its operational concepts in the military area.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.184-191
• /
• 2022

Underwater acoustic wave in shallow water is propagated through multipath that has a large delay spread causing Inter-Symbol Interference (ISI) and these characteristics deteriorate the performance in the communication system. In order to analyze the communication performance and investigate the correlation with multipath delay spread in a reverberant environment, an underwater acoustic communication experiment using Binary Phase-Shift Keying (BPSK) signals with symbol rates from 100 sym/s to 8000 sym/s was conducted in a 5 × 5 × 5 m³ water tank. The acoustic channels in a well-controlled tank environment had the characteristics of dense multipath delay spread due to multiple reflections from the interfaces and walls within the tank and showed the maximum excess delay of 40 ms or less, and the Root Mean Squared (RMS) delay spread of 8 ms or less. In this paper, the performances of Bit Error Rate (BER) and output Signal-to-Noise Ratio (SNR) were analyzed using four types of communication demodulation techniques. And the parameter, Symbol interval to Delay spread Ratio in reverberant environment (SDR_rev), which is the ratio of symbol interval to RMS delay spread in the reverberant environment is defined. Finally, the SDR_rev was compared to the BER and the output SNR. The results present the reference symbol rate in which high communication performance can be guaranteed.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• Journal of the Korea Society for Simulation
• /
• v.26 no.4
• /
• pp.1-9
• /
• 2017

The Genetic Algorithm(GA) is a global search algorithm based on biological genetics. It is widely used in various fields such as industrial applications, artificial neural networks, web applications and defense industry. However, conventional Genetic Algorithm has difficulty maintaining feasibility in complicated situations due to its fixed number of chromosomes. This study proposes the Genetic Algorithm using variable chromosome with chromosome attachment. And in order to verify the implication of changing number of chromosomes in the simulation, it applies the Genetic Algorithm using variable chromosome with chromosome attachment to antisubmarine High Value Unit(HVU) escort mission simulation. As a result, the Genetic Algorithm using variable chromosome has produced complex strategies faster than the conventional method, indicating the increase of the number of chromosome during the process.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.49-59
• /
• 2018

The simulation-based weapon system effectiveness analysis is to support the decision making in the acquisition process of the defense domain. The effectiveness of the weapon system is a complexly influenced indicator from various factors such as environment, doctrine and so on. And the measurement of effectiveness can be defined differently in compliance with major issues in the weapon system. Because of this, the weapon system effectiveness analysis requires the comparative experiment of various alternatives based on the underlying assumption. This paper presents the efficient approach to reconfigure the simulation using the reflection technique. The proposed method contains the recoupling and resetting the simulation entity using DEVS(Discrete EVent System specification) formalism-based dynamic plug-in method. With the proposed method, this paper designs the effectiveness analysis environment that can efficiently handle the various alternatives of the weapon system.