• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.128-129
• /
• 2010

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.613-616
• /
• 2005

In this word as the first step to develop optical biosensors for a single cell level analysis, the preparation method of nano-scale polymer hydrogel spheres containing an enzyme was set up and the feasibility of the spheres as optical biosensors was investigated. The horseradish peroxidase (HRP) was encapsulated in the PEG hydrogel spheres by suspension photopolymerization, yielding spheres of the average size of 305 nm. After the polymerization, the incorporation and activity of HRP within the spheres were determined by the production of fluorescence resulted from the enzymatic reaction between HRP and $\H_{2}O_{2}$. The fluorescence emission response of the HRP-loaded PEG hydrogel spheres increased by nearly 300$\%$ as hydrogen peroxide concentration was changed from 0 to 11 nM in the presence of Amplex Red. The results suggest that the method to prepare the PEG hydrogel nanospheres containing an enzyme could be used for developing optical biosensors to measure various analytes in the very small samples like a single cell.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.1017-1023
• /
• 2015

The amount of smart phones has increased exponentially. Due to the periodic release of high-performance smart phones and upgraded operating system, new smart phones become out-dated over 1 or 2 years. In order to solve environmental constraints of these smart phones, virtualization technology using Thin-Client terminal has been developed. However, in the case of Virtual Machine(VM), the applications associated with sensors and a GPS device can not run because they are not included. In this paper, by implementing the device driver for Android running in a virtual machine in the x86-based systems, it is to provide Android virtualization capabilities such as using the latest smart phones in the virtual machine environment. It would like to propose a method that the virtual device driver receives sensors and GPS information from the old Android smart phones(Thin-Client) that actually work and run as if the real device exists.

• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.1-9
• /
• 1995

The ${\gamma}$-ray deposition spectra were calculated by Monte Calro method to obtain the scintillation characteristics of the ${\gamma}$-ray for BGO scintillation detector with the spherical shape of 1.25 cm radius. The code used in calculating the ${\gamma}$-ray deposition spectra was made for personal computer with qbasic language. Also the ${\gamma}$-ray energy spectra of $^{22}Na$, $^{137}Cs$ and $^{207}Bi$ were measured with the detector. The energy dependent resolution below 2000 keV for the detector was determined by estimating the standard deviation of the photopeak fitted with gaussian function, and $X^{2}$ fitting using Nardi's empirical formula. The measured spectra of $^{22}Na$ and $^{137}Cs$ were compared with the broadened spectra which were obtained by broadening the calculated ${\gamma}$-ray deposition spectra with the energy dependent resolution. The absolute efficiency and the intrinsic peak efficiency of the detector were obtained by calculating the ${\gamma}$-ray deposition spectrum with the code.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.82-88
• /
• 2009

Low costed position sensor or sensorless control method is generally used in the motor control for home appliance because of the material cost and manufacture standard restriction. In conventional sensorless method, the stator resistance and back-EMF coefficient are varied by the motor speed and load torque variation. Therefore, position error occurred when the motor is operated by sensorless control method because of these variations. In this paper, the compensation method is proposed for sensorless position error using 2 hall sensors.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.130-133
• /
• 2010

본 논문에서는 X-band 절전센서용 마이크로스트립 구형패치 배열 안테나의 설계 방법을 제안 하고자 한다. 제안된 배열 안테나는 송 수신 안테나가 각각 1x2배열로 구성 되었다. 안테나는 CST MWS를 사용하여 시뮬레이션 하였고 FR-4 기판(h=1.0mm, ${\varepsilon}_r$=4.4)을 사용하여 제작하였다. 시뮬레이션 결과는 대역폭이 4%(VSWR${\leq}$2), 이득은 6.3dBi, 빔폭은 약 $60^{\circ}$(El)/$15^{\circ}$(Az)로 예측되었다. 안테나는 시뮬레이션 결과를 바탕으로 제작 되었고 절전센서용 RF 송수신기 회로 뒷면에 설치되어 무반사실에서 방사 특성을 측정하였다. 측정된 결과는 대역폭이 7%(VSWR${\leq}$2), 이득은 4.8dBi, 빔폭은 약 $55^{\circ}$(El)/$15^{\circ}$(Az)로 시뮬레이션 결과와 매우 유사한 결과를 얻었다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.67-69
• /
• 2017

본 논문에서는 철도차량용 매입형 영구자석 동기전동기의 저속영역에서 구동을 위해 센서리스 제어 기법을 적용하였다. 저속영역에서 센서리스 제어는 회전하는 전동기에 연속적인 고주파 신호를 인가하고 그 신호에 대한 응답을 이용한다. 매입형 영구자석 동기전동기의 회전자 인덕턴스 변화와 자기적 돌극성을 이용하므로 특정 전동기에 대해 우수한 성능을 나타낸다. 따라서 본 논문에서는 동기좌표계 d축 전압에 정현파 신호와 구형파 신호를 주입하여 두 방식에 대한 결과를 시뮬레이션을 통해 분석하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.199-205
• /
• 1998

Brushless DC motors have trapezoidal back-EMF waveform. Theoretically it should be fed with rectangular phase current in order to produce torque ripple free. Because it is drived by a voltage source inverter, perfect rectangular phase current can not available and therefore produce torque ripple. In this paper, the torque ripple due to commutation is analyzed and the practical method that can reduce the torque ripple is proposed. Experimental and simulation results show the effectiveness of the proposed method.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.274-276
• /
• 2008

본 논문에서는 차량충돌방지 센서용 24GHz 대역 마이크로스트립 구형패치 배열 안테나의 설계 방법을 제안하였다. 안테나는 송신안테나 $1{\times}2$배열, 수신안테나 $1{\times}2$배열로 각각 구성 하였다. 안테나는 충돌방지용 센서회로 뒷면에 설치될 것이며 RO-4003 기판(h=0.5mm, ${\varepsilon}_r$=3.38)을 사용하여 설계하였다. 안테나 이득은 8.5dBi 이상으로 설계 되었다.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.93-98
• /
• 2022

The purpose of this paper was to propose a method for improving the performance of the open-loop control of single-phase permanent magnet synchronous motor (SP-PMSM), based on a square wave voltage injection. Generally, the SP-PMSM driving systems cmprise a full-bridge inverter and asymmetric air-gap structure of magnetic circuit, because a zero torque occurs on the symmetrical air-gap. As a result, it cannot be started at a specific rotor position. Thus, it is possible to cause the start-up failure at an open-loop control for sensorless operation of SP-PMSM. In this paper, the method with square wave voltage injection considering the nonlinearity of the inverter is presented to resolve the problem. The effectiveness of the proposed algorithm is verified through several experiments.