• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.27-37
• /
• 1999

A CMOS ReadOut Integrated Circuit (ROlC) for InfraRed Focal Plane Array (IRFPA) detector is presented, which is a key component in uncooled thermal imaging systems. The ROIC reads out signals from $64\times64$ Barium Strontium Titanate (BST) infrared detector array, then outputs pixel signals sequentially after amplifying and noise filtering. Various design requirements and constraints have been considered including impedance matching, low noise, low power dissipation and small detector pitch. For impedance matching between detector and pre~amplifier, a new circuit based on MOS diode structure is devised, which can be easily implemented using standard CMOS process. Also, tunable low pass filter with single~pole is used to suppress high frequency noise. In additions, a clamping circuit is adopted to enhance the signal~to-noise ratio of the readout output signals. The $64\times64$ IRFPA ROIC is designed using $0.65-\mu\textrm{m}$ 2P3M (double poly, tripple metal) N~Well CMOS process. The core part of the chip contains 62,000 devices including transistors, capacitors and resistors on an area of about $6.3-mm\times6.7-mm$.

• Spatial Information Research
• /
• v.9 no.1
• /
• pp.107-124
• /
• 2001

The purpose of this research is to develop system and to establish methodology for managing spatial Database in Land Management Information System(LMIS). Spatial Database which is used by a various public department such as parcel survey and registry, land use planning and Land value appraisal in local government, is composed of parcel map, topographic map and zoning map. Spatial data has been constructed and managed by various department and then hard to maintain accuracy and coinsistency. So, it is important to establish the basic data management concept that source data(ex : parcel map, topographic map, zoning map, etc.) should be managed by responsible department. at the same time, application data for bussiness (ex : individual parcel price map) must be recomposed from base map by it's own objects. This is, Spatial data management system (SDMS) should be designed, developed according to this concept for managing consistency among data, reducing construction and management cost of database. Our SDMS was developed based on Open LMIS middleware architecture using OpenGIS CORBA specification for standard interface, RUP(Rational Unified Process) for development methodology, UML(Unified Modeling Language) for system design and VisiBroker, C++, CAD system for system implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.1-7
• /
• 2020

In recent years, as LED display systems are actively spread, study on effective control methods for an LED driver for driving the systems has been in progress. The most representative among them is the uniform brightness control method for the LED driver channel. In this paper, we propose an LED driver IC for BLU with current compensation and system protection functions to minimize channel luminance deviation. It is designed for current accuracy within ±3% between channels and a channel current of 150 mA. In order to satisfy the design specifications, the channel amplifier offset was canceled out by a chopping operation using a channel-driving PWM signal. Also, a pre-charge function was implemented to minimize the fast operation speed and luminance deviation between channels. LED error (open, short), switch TR short detection, and operating temperature protection circuits were designed to protect the IC and BLU systems. The proposed IC was fabricated using a Magnachip 0.35-um CMOS process and verified using Cadence and Synopsys' Design Tool. The fabricated LED driver IC has current accuracy within ±1.5% between channels and 150-mA channel output characteristics. The error detection circuits were verified by a test board.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.691-697
• /
• 2009

Hardware dedicated off-the-shelf maritime differential GPS RSIM lacks the open architecture to meet all the minimum maritime user requirements and to include future GNSS improvements after recapitalization. This paper carries out a study to replace existing hardware dedicated differential GPS RSIM with software differential GPS RSIM in order to make up the weak point of hardware dedicated off-the-shelf maritime differential GPS RSIM. In this paper, the architecture of software RSIM is proposed for maritime DGPS recapitalization. And the feasibility analysis of the proposed software differential GPS RSIM is performed as the first phase to realize the proposed architecture. For the feasibility analysis, the prototype RF module and DSP module are implemented with properties as wide RF bandwidth, high sampling frequency, and high speed transmission interface. This paper shows that the proposed architecture has the possibility of real time operation of software RSIM functionality onto the PC-based platform through the analysis of computation time. Finally, this paper verifies that the L1/L2 dual frequency software differential RSIM designed according to the proposed method satisfies the performance specifications set out in RTCM paper 221-2006-SC104-STD.

• Convergence Security Journal
• /
• v.16 no.4
• /
• pp.17-24
• /
• 2016

Many companies and organizations are building a mobile office environment using the LTE network, the national disaster network and Air Force LTE network are built for public safety and national defense. However the recent threats on information security have been evolving from information leakage to DDoS attacks to neutralize the service. Especially, the type of device such as Smart phones, smart pad, tablet PC, and the numbers are growing exponentially and As performance of mobile device and speed of line develop rapidly, DDoS attacks in the mobile environment is becoming a threat. So far, universal countermeasure to DDoS attacks has been interception the network and server step, Yet problem regarding DDoS attack traffic on mobile network and expenditure of network resources still remains. Therefore, this paper analyzes the traffic type distributed in the private mobile network such as the National Disaster Network, and Air Force LTE network in order to preemptively detect DDoS attacks on terminal step. However, as direct analysis on traffic distributed in the National Disaster Network, and Air Force LTE network is restricted, transmission traffics in Minecraft and uploading video file upload which exhibit similar traffic information are analyzed in time series, thereby verifing its effectiveness through establishment of DDoS attacks standard in mobile network and application that detects and protects DDoS attacks

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.44-49
• /
• 2020

In this paper, a measuring circuit is designed through analyzing manufacture specification of the sensor based on MOS. And the best input-output polynomial are induced that really gas sensors are used in gas safety management industrial fields. Response characteristics of a MOS gas sensor is analysed by through sensor's output voltages are measured after standard gases with six kinds of concentrations are manufactured and are injected to the sensor. A lookup table is created by relations of sensor's output voltages by injecting gases with other concentrations. Because data of the formed lookup table are equal interval, a polynomial can be induced of method of approximation function. So the 5th polynomial of input-output for a sensor is defined, coefficients are calculated by using least squares method, and the 5th polynomial is completed for representing characteristics of the sensor. If the proposed polynomial is applied to gas leak detectors, an inverse transformation of polynomial and programing of array codes are recreated. In this research, polynomial is implemented with array types that intervals of values of a lookup table are one-fifth sampled and interpolated. The performance of proposed 5th calibration equation is verified that errors are reduced than a linear expression when tests are performed by measurement of concentrations against injection of standard gases.

• Convergence Security Journal
• /
• v.11 no.3
• /
• pp.67-74
• /
• 2011

One of the major requisites for the success of the smart-TV is to create a circumstance where smart-TV app's are produced and purchased on a large scale. However, the smart TV app's may succeed only under the condition that the user interface of the smart TV is greatly evolved from the typical TV remote controller. Several equipments have been devised to tackle the problem of the poor user interface of the smart-TV; however, they are not satisfactory in the aspects that they usually increase the costs of TV-set and they do not help practically the app developers. The equipments are pre formed so that it is hard for the app developers to design their own user interface using them. In the paper, sMartUX, a method for developing the smart-TV app is introduced. sMartUX provides a new paradigm and development environment for designing, implementing, and operating the user interface of the smart TV app using a smart-phone. With sMartUX, app developers can design their own user interface using the various facilities of a smart-phone, and they need not to care the details of various smart-phones and how to launch their user interface onto a smart-phone.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.5
• /
• pp.1-12
• /
• 2015

NAND flash memory has being used for storage systems widely, because it has good features which are low-price, low-power and fast access speed. However, NAND flash memory has an in-place update problem, and therefore it needs FTL(flash translation layer) to run for applications based on hard disk storage. The FTL includes complex functions, such as address mapping, garbage collection, wear leveling and so on. Futhermore, implementation of the FTL on low-power embedded systems is difficult due to its memory requirements and operation overhead. Accordingly, many index data structures for NAND flash memory have being studied for the embedded systems. Overall performances of the index data structures are enhanced by a decreasing of page write counts, whereas it has increased page read counts, as a side effect. Therefore, we propose an index management method using a page mapping log table in $B^+$-Tree based on NAND flash memory to decrease page write counts and not to increase page read counts. The page mapping log table registers page address information of changed index node and then it is exploited when retrieving records. In our experiment, the proposed method reduces the page read counts about 61% at maximum and the page write counts about 31% at maximum, compared to the related studies of index data structures.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.67-74
• /
• 2004

Differently from an existing analog control, because the digital control includes microprocessor basically, the digital control is enable to monitor internal parameters of DC-DC converter and to control output voltage remotely by communicating with a Windows based PC. These things are impossible in an analog control and there are more advantages in a digital control than an analog control. In this paper, with the advantages mentioned above, the feasibility of digital controlled DC-DC converter in low price is proposed. In order to implement these functions, it is used the inexpensive H8/3672 made by Renesas that has built in AD converters and PWM logic generators. The proposed digital controller is applied to a flyback converter that is designed to output DC 5[V] from DC 20∼30[V] and is remotely controlled to make variable outputs from DC 0[V] to 5[V] above in PC. The PWM controller adopts the PD controller in PID. In the last, the response characteristics of a step reference voltage and in a steady state are experimented to verify the feasibility and the usefulness of the proposed flyback converter that is implemented inexpensively.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.43-51
• /
• 2003

제품 설계 및 디자인의 과정이 고도로 높은 기술력을 바탕으로 이루어지고 있으며, 국내의 기업체도 우수한 기술력과 높은 품질로 경쟁력을 키우며 다양한 고객의 요구에 대응하여 고객만족을 꾀하여야 한다 이의 기반이 되는 제품의 품질과 사양은 설계에서 시작되는데 아직 국내의 많은 기업들은 설계 및 제작 단계에서 많은 시간과 비용을 낭비하고 있다. 3D Modeling Solution은 설계오류가 적으며 시각적인 설계를 할 수 있어 최소의 인력으로 제품을 설계할 수 있는 장점이 있지만 너무 많은 기능으로 인해 사용자가 쉽게 적용하고 사용하기 어려운 단점을 가지고 있다. 본 연구에서는 이러한 산업현장의 어려움을 덜기 위해 3D 전용 Modeling Solution에 사용자가 쉽게 부품을 조림할 수 있는 엔진을 접목시켜 누구나 사용가능하고 신속한 신제품 개발이 이루어지도록 하였다. 본 연구에서는 Autodesk사의 Inventor와 Microsoft Visual Basic으로 Inventor에서 제공하고 있는 API함수를 이용하여 조립자동화를 위한 조립조건 생성, 조립자동화, 부품 재질변경, 수동조립 그리고 부품의 DB화를 구현하였다. 이 프로그램은 조립조건 설정 폼을 이용하여 부품의 조립속성을 생성하고 부품조립 폼을 이용하여 조립자동화를 실행할 수 있도록 하였다. 또한 모든 부품을 Database화 하여 부품을 손쉽게 탐색할 수 있으며, 추후에도 언제든지 재사용이 가능하여 제품설계 효율성을 극대화 할 수 있다. 현장 적용 시 신속한 신제품 개발과 품질의 우수성으로 고객만족을 꾀할 수 있으며, 시간과 비용을 동시에 줄여 경쟁사와의 경쟁우위를 높이는 해결책이 될 수 있다.-110 마이크로프로세서와 21285 주제어기가 장착된 EBSA-285 보드이다. 측정하면서 수행하였다. 검증 결과 random 상태에서는 문헌자료에 부합되는 예측결과를 보여주었으나, intermediate와 constant 상태에서는 문헌보다 다소 낮은 속도를 보여주었다 이러한 속도차는 추후 현장 데이터를 수집하여 보다 실질적인 검증을 통하여 조정되어야 할 것으로 판단된다.지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.