• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.148-148
• /
• 2023

산업 고도화로 인하여 복잡하고 다양한 유기물의 사용량이 증가하였으며, 공공수역 내 새로운 오염물질이 유입됨에 따라 생화학적 산소요구량(BOD) 중심의 수질평가에 한계를 나타내었다. 이후 난분해성 물질을 고려한 유기물관리 정책과 총량관리의 필요성이 제기되었고 국내 하천과 호소에서는 총 유기탄소(TOC)를 유기물 관리지표로 설정하였다. 그러나 부영양 하천과 호소에서 TOC는 외부 부하뿐만아니라 식물플랑크톤의 과잉성장에 의해 증가할 수 있는 항목이므로 TOC 관리정책 추진을 위해서는 유기물의 기원에 대한 파악이 필요하다. 한편, 우리나라와 같이 몬순 기후대에 속한 댐 저수지의 경우 강우시 유입하는 탁수에 의해 다량의 유기물과 인이 유입되기도 하지만 식물플랑크톤의 제한요인 중 광량에 많은 영향을 미친다. 식물플랑크톤의 광합성은 수체 내 유기탄소 내부생성에 매우 중요한 요소이나 점 단위의 실험적 방법을 활용한 유기탄소 순환 해석은 저수지의 시·공간적인 변동성을 고려하기에 한계가 있다. 본 연구의 목적은 금강 수계 최대 상수원인 대청호를 대상으로 3차원 수리-수질 모델을 적용하여 유기탄소 성분 별 유입과 유출, 내부생성 및 소멸량을 평가하고 탁수가 저수지에서의 유기탄소 순환에 미치는 영향을 분석하는데 있다. 유기탄소 물질수지 해석을 위해 AEM3D 모델을 사용하였으며 2018년을 대상으로 입력자료를 구축한 후 보정 및 검정을 수행하였다. 모델은 유기탄소를 입자성, 용존성, 그리고 난분해성과 생분해성으로 구분하여 모의하며 유기물질 성상별 실험결과를 이용하여 입력자료를 구축하였으며 유기탄소순환 해석을 위해 4가지의 탄소성분과 조류 세포 내 탄소의 질량 변화율을 계산하였다. 이를 위해 외부 유입·유출부하율, 수체 내 생성(일차생산, 재부상, 퇴적물과 수체 간 확산) 및 소멸률(POC 및 조류 침강, DOC 무기화, 탈질)을 고려하였으며 탁수의 영향을 분석하기 위해 탁수 포함여부 시나리오를 구성하고 유기탄소 생성 및 소멸기작별 변동성을 비교 분석하였다. 모델은 2018년의 물수지를 적절히 재현하였으며 저수지의 수온 및 탁도 성층구조를 잘 재현해내면서 전반적인 수질을 적절하게 모의하였다. 탁수를 고려하였을 시 연간 TOC 부하량 중 내부기원 부하량은 56% 수준이였으나 탁수를 배제한 경우 내부기원 부하량은 82%로 나타났다. 특히, 연평균 Chl-a 농도가 44~48% 차이가 발생하면서 1차생산량이 약 4배가량 증가하였다. 몬순지역에서의 탁수는 체류시간이 긴 성층 저수지에서 식물플랑크톤 성장제어에 큰 영향을 미쳤으며 전반적인 유기탄소 순환을 해석하는데 있어 매우 중요한 인자로 작용하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.117-124
• /
• 2018

This paper describes the localization development of an axial fan for KM-SAM multi-function radar. The multi-function radar, which is constantly affected by the external environment, is a key instrument for detecting and tracking low and medium altitude threat targets. Operating this equipment smoothly requires a fan for controlling the internal temperature and humidity. Presently, all such fans are imported. To solve these problems, localization development research was proposed. The development of localization includes analysis of requirements through review of related technical reports such as original equipment and system equipment specification, prototype design, and verification of design requirement through performance test and environmental test. The study results are described. The blower consisted of an axial fan with guide vanes and the motor was designed to generate a maximum airflow of 970 CFM and a wind pressure of 4.8 IWG. Six prototypes were manufactured for performance evaluation. In addition, for reliable data acquisition, AC power supply, fan performance tester and data acquisition equipment were designed and tested. All prototypes were verified as having design requirements equal to or better than those of imports.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.21-34
• /
• 2015

In this study, a reference model is constructed that provides architects or designers with sufficient information on the intelligent service facility that is essential for U-City space configuration, and for the support of enhanced design, as well as for planning activities. At the core of the reference model is comprehensive information about the intelligent service facility that plans the content of services, and the latest related information that is regularly updated. A plan is presented to take advantage of the database of list information systems in the Public Procurement Service that handles intelligent service facilities. We suggest a number of improvements by analyzing the current status of, and issues with, the goods information in the Public Procurement Service, and by conducting a simulation for the proper placement of CCTV. As the design of U-City plan has evolved from IT technology-based to smart space-based, reviews of limitations such as the lack of standards, information about the installation, and the placement of the intelligent service facility that provides U-service have been carried out. Due to the absence of relevant legislation and guidelines, however, planning activities, such as the appropriate placement of the intelligent service facility are difficult when considering efficient service provision. In addition, with the lack of information about IT technology and intelligent service facilities that can be provided to U-City planners and designers, there are a number of difficulties when establishing an optimal plan with respect to service level and budget. To solve these problems, this study presents a plan in conjunction with the goods information from the Public Procurement Service. The Public Procurement Service has already built an industry-related database of around 260,000 cases, which has been continually updated. It can be a very useful source of information about the intelligent service facility, the ever-changing U-City industry's core, and the relevant technologies. However, since providing this information is insufficient in the application process and, due to the constraints in the information disclosure process, there have been some issues in its application. Therefore, this study, by presenting an improvement plan for the linkage and application of the goods information in the Public Procurement Service, has significance for the provision of the basic framework for future U-City enhancement plans, and multi-departments' common utilization of the goods information in the Public Procurement Service.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.443-450
• /
• 2014

To fulfill the recent increasement in the public and private demands for various spatial data, the central and local governments started to produce those data. The low-level land cover map has been produced since 2000, yet the production of high-level land covered map has started later in 2010, and recently, a few regions was completed recently. Although many studies have been carried to improve the quality of land that covered in the map, most of them have been focused on the low-level and mid-level classifications. For that reason, the study for high-level classification is still insufficient. Therefore, in this study, we suggested the automatic extraction of land readjustment for paddy land that updated in the mid-level land mapping. At the study, the RapidEye satellite images, which consider efficient to apply in the agricultural field, were used, and the high pass filtering emphasized the outline of paddy field. Also, the binary images of the paddy outlines were generated from the Otsu thresholding. The boundary information of paddy field was extracted from the image-to-map registrations and masking of paddy land cover. Lastly, the snapped edges were linked, as well as the linear features of paddy outlines were extracted by the regional Hough line extraction. The start and end points that were close to each other were linked to complete the paddy field outlines. In fact, the boundary of readjusted paddy fields was able to be extracted efficiently. We could conclude in that this study contributed to the automatic production of a high-level land cover map for paddy fields.

• International Commerce and Information Review
• /
• v.13 no.1
• /
• pp.29-52
• /
• 2011

A predictable and manageable output is desirable for most businesses. However, it is very difficult to control the quality and quantity of products in the food and agriculture business. Predictable outputs help managers plan their marketing, sales, and inbound and outbound logistics, but these are not easy to achieve in the food and agriculture business. Various industries have adopted different levels of automation and utilization of information systems for quality/quantity control; however e-Commerce of the food and agriculture industry is far behind those of other industries. Today, the food and agriculture industry is supposed to be more integrated than ever in order to reduce risks and improve processing costs, from farm to table. Since its operations including production, processing, storage, distribution, and management are dispersed all over the world, the food and agricultural industries now depend more on IT than other industries. This study attempts to develop a framework to analyze the current situation of agricultural product e-Commerce in Korea, and finds out the actual situation of the farmers operating on-line shopping systems through the developed framework and suggests some improvements.

• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.1-15
• /
• 2023

Expectations for wireless communication technology are rising as a base technology that promotes innovation in various industries in line with the paradigm of digital transformation in the 21st century beyond the stage of being used only for communication service itself. In this study, in order to compare 6G technological competitiveness between Korea and leading countries, technological competitiveness was confirmed through PFS, CPP, and network analysis based on GaN Integrated Circuit patent data. Korea's 6G technological competitiveness was 0.62 in PFS and 3.93 in CPP, which were 32.8% and 19.9%, respectively, compared to leading countries. In addition, as a result of network analysis, the collaboration rate in the 6G field was 7.2%, and the collaboration ecosystem was very insufficient in most countries. In contrast, it was confirmed that Korea, unlike leading countries, has established a small-scale collaboration ecosystem linked by industry and academia. Thus, it is necessary to establish a strategy for 6G communication technology at the national level so that communication technology can be advanced based on a relatively well-established collaborative ecosystem.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.189-207
• /
• 2020

The government has achieved quantitative growth in university start-up education while supporting start-up education. However, it failed to systematize start-up education from an academic, policy, and practical perspective and to reveal the relationship between education and achievements in supporting start-ups. Therefore, there is a lack of interest and effort to promote effective education. In Europe, in-depth research has already been done over many years to establish an EntreComp system. Competences create values for others and attempt to apply them to education, viewing them as the people's lifelong competitiveness. On the other hand, it is urgent to improve the education system as domestic university start-up education is mainly focused on cultural level start-up skills and easy-to-access education from a business administration perspective. Based on this, the entrepreneurship competence-based start-up education system was designed. Next, eight EntreComp frames were drawn for university students through the Focus Group Interview (FGI) and Delphi survey methods, as well as domestic and international prior studies on EntreComp. In 2018, 919 start-up education programs of 42 start-up leading universities were conducted to derive the status of education by EntreComp. Prior studies of 25 entrepreneurship competences, including data from Bacigalupo et al.(2016), which studied EntreComp in the EU, were investigated and reflected the frequency of research and the importance of education and start-up perspectives. Based on the purpose of the university start-up education presented in this study, the entrepreneurship competence frame consisting of a total of eight, including spotting opportunities, value creation, self improvement, mobilising resources, technology application, strategic management, relationship, and learning through experience, was derived through expert verification. It also investigated the current status of education by competence, the degree of reflection of competence education, and the relationship with the results of support for start-ups that reflect the number of students enrolled in each university. Through this, it was suggested that future start-up education at universities could be improved from the EntreComp perspective. It has a differentiation in research in that it conducted a thorough survey using the data on start-up courses operated by leading startup universities for a certain period. However, it is difficult to generalize because the number of samples of leading startup universities is limited. Nevertheless, this study proposes the educational goal of advancing university start-up education from the perspective of entrepreneurial competence, cultivating future required competences, and fostering entrepreneurial talents that create value for others. In addition, it is meaningful in that it presents a clear direction for subsequent research by preparing a framework for research from a more essential perspective on the entrepreneurship competence frame.

• Food Industry
• /
• s.181
• /
• pp.10-37
• /
• 2004

식용유지는 식용으로 이용할 수 있는 가시적인 상태의 액상(oil) 또는 고체상(fat)의 식용기름을 말하지만 식품산업 측면에서는 가시적인 상태의 유지(가시지방)뿐만 아니라 유지가공 식품이나 기타의 식품에 함유되어 섭취되는 비가시적인 상태의 유지(비가지 지방)도 포함될 수 있다. 식용유지는 생명을 유지하는데 없어서는 안될 영양소로서 탄수화물 단백질과 함께 3대 영양소 중의 하나이며 1g당 9kcal를 내는 고도로 농축된 에너지원이면서 필수지방산의 공급원이고 비타민 A, D, E 등의 지용성 비타민과 기타 특수한 영양성분의 운반체로서 높은 영양적 가치를 갖는다. 지방성분은 음식물로부터 섭취가 불가능할 경우에는 체내에서 탄수화물이나 단백질을 기질로 하는 대사과정에서 합성되어 지질 또는 필수지방산과 지용성 비타민은 식품으로 지방질과 함께 흡수되어야 하므로 식품의 한 성분으로 지방의 중요성을 인정받고 있다. 1960년대 이후 국민소득의 증가와 함께 식생활도 다양화되고 서구화 간편화되면서 지방 함량이 높은 식품과 유지를 이용한 식품의 소비가 증가하였고 전체적인 유지 소비량도 늘어나는 추세에 있다. 60년대 초에는 총열량 중 지방이 차지하는 비율이 $6\%$ 정도였으나 최근에는 급격히 증가되어 2000년말 현재 $25.5\%$로 증가하였다. 97년까지 계속 증가하던 공급 에너지량은 98년 IMF의 영향으로 2,799 kcal까지 감소했으나 99년 들어 IMF 이전 수준으로 회복되었다. 또한 연간 일인당 순 식용유지류 공급량은 1990년대 까지 급격히 증가하였으나 이후로는 소폭 증가하는 추세이다. 2000년말 현재 식용유지 총 공급량은 76만2 천톤으로써 99년 73만5 천톤에 비해 2.7만톤이 증가하였다. 1998년 IMF 시기를 제외하고는 공급물량은 계속해서 증가 추세이다. 특히 1998년도에 비하여 2000년도에 식물성 유지는 2배 가까이 증가하였으나, 동물성 유지는 절반 이하로 감소되는 추세이며 공급물량으로 보면 대두유, 팜유가 주요 유종으로 식물유지 전체에서 차지하는 비중이 $72.3\%$로 압도적이다. 라면용 튀김기름과 마가린 쇼트닝의 원료로서 대부분 사용되는 팜유를 제외하고 가정용 식용유의 대부분을 차지하는 대두유가 이처럼 식용유지 시장의 대부분을 차지하게 된 이유는 첫째, 90년대 초반 수입 자유화 이후 타 유종 대비 낮은 가격을 형성하여 유지업체가 수입을 늘린 것이고 둘째로는 국내에서 대두유와 대두박을 생산하는 대두가공업체의 안정적 대두유 공급이 주요 원인이라고 할 수 있다. 식용유지의 시장규모는 식품공전상 식용유지로 분류된 제품들의 2000년도 출하액으로 보면 약 6,616 억원 정도이다. 한편 유종이 단순했던 가정용 식용유지 시장이 최근 새로워지고 있다. 주로 조리용으로 사용했던 것에서 건강을 생각하는 품목으로 바뀌는 경향이다. 아직은 가정용에서 대두유가 가장 많지만 옥배유나 채종유 더 나아가 건강이미지의 식용유인 홍화유 올리브유 해바라기유등이 증가하고 있는 추세이다. 한편 기존 식용유가 비만의 원인인 것 때문에 기피되던 것에서 새롭게 다이어트용 식용유 제품이 출시되어 시장에 새 바람이 불고 있다. 일본 식용유지 시장규모는 물량으로 172 만톤, 금액으로는 2,786 억엔(약 2조7860 억원) 수준이다. 지난 10년간 증가율은 물량 측면에서 약 $5\%$정도 신장하고 금액으로는 큰 증감이 없었다. 식용유는 조리의 기초 소재로서 안정한 수요를 갖고 있지만 주요 유종인 샐러드유의 가격이 하락하여, 전체적으로 시장이 물량이 증가하면서도 매출액이 신장하지 못하여 시장규모는 축소되었다고 할 수 있다. 일본 식용유지 업계의 제품동향을 보면 거의 모든 업체가 가정용 시장에서 건강 기능성 식용유지를 출시하고 있다는 점이다. 물론 일본은 건강기능성 식품에 대한 제도적인 뒷 받침이 되어 있어 기능성 식품의 시장출시가 용이한 점이 가정용 시장에 큰 영향을 미쳤다고 볼 수 있다. 유지 산업의 고부가가치화를 위해서는 전통적인 산업의 제품과 기술만으로는 달성하기 어렵다. 국내와 일본 식용유지 업계의 경향을 참고해 볼 때 차별화된 식용유지 제품과 기술의 개발이 절실히 필요하다. 앞서 언급한 고부가가치 제품과 기술 관련 사향을 바탕으로 국내 유지분야가 중점적으로 연구할 분야를 선정해 보면 리파제의 고정화 연구, 생물공학 기술을 활용한 효소의 개발과 이를 이용한 유지 가공 기술 연구, 유지성분의 유화 안정화 기술 연구, 식용유지의 선택적 수소경화 기술 연구 트랜스 지방산 저감기술연구, 효소 반응조 설계기술 연구, 지질 분자구조 분석기술 연구 분야 등이 유망하다. 상기와 같은 연구 분야를 육성하기 위해서는 유지 전문 인력의 육성, 해외 네트웍의 구축, 산학연 공동연구 추진, 국가적 차원의 정책 및 지원 등이 절실하다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.312-318
• /
• 2010

This study was carried out to develop and test a prototype program that recommends the nitrogen topdressing rate using the color digital camera image taken from rice field at panicle initiation stage (PIS). This program comprises four models to estimate shoot N content (PNup) by color digital image analysis, shoot N accumulation from PIS to maturity (PHNup), yield, and protein content of rice. The models were formulated using data set from N rate experiments in 2008. PNup was found to be estimated by non-linear regression model using canopy cover and normalized green values calculated from color digital image analysis as predictor variables. PHNup could be predicted by quadratic regression model from PNup and N fertilization rate at panicle initiation stage with $R^2$ of 0.923. Yield and protein content of rice could also be predicted by quadratic regression models using PNup and PHNup as predictor variables with $R^2$ of 0.859 and 0.804, respectively. The performance of the program integrating the above models to recommend N topdressing rate at PIS was field-tested in 2009. N topdressing rate prescribed for the target protein content of 6.0% by the program were lower by about 30% compared to the fixed rate of 30% that is recommended conventionally as the split application rate of N fertilizer at PIS, while rice yield in the plots top-dressed with the prescribed N rate were not different from those of the plots top-dressed with the fixed N rates of 30% and showed a little lower or similar protein content of rice as well. And coefficients of variation in rice yield and quality parameters were reduced substantially by the prescribed N topdressing. These results indicate that the N rate recommendation using the analysis of color digital camera image is promising to be applied for precise management of N fertilization. However, for the universal and practical application the component models of the program are needed to be improved so as to be applicable to the diverse edaphic and climatic condition.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.197-210
• /
• 2006

This study explored several agenda related to license system, education, professional work of radiological technologists(RTs) and a transition process of law for them to investigate a developmental strategy of RTs as a professional career. The results are as followings : 1. The national license system for RTs was started from 1965, 1965-1972 x-ray technicians(medical assistance), 1973-present(2006) radiotechnologist(medical technologist) since then. 2. The average pass ratio of national license examination(1965-2006) for RTs was 46.6%. The method, subjects and level of the examination should be improved. 3. The education term for RTs has been changed since 1963 ; 1963-1990 two year college, 1991-1999 three year college, 2000-2006 four year and three year college depending on universities and colleges. As of 2006, there are twelve 4-year universities and eighteen 3-year colleges. The total number of new students were 1,956. 4. The new developmental paradigm should be made for technology education of RTs corresponding to the development of medicine and science. 5. The qualification system of clinical specialists in radio-technology field needs to be operated not by the non-governmental body(The Korean Radiological Technologists Association) but by the governmental body. 6. The vertical relationship among RTs, doctors and other medical workers should be rebuilt through the revision of law. Especially, doctors and dentists 'guidance authority' for RTs should be changed to 'request authority'. 7. The service extent of RTs should be extended in medical fields corresponding to professional work of RTs and a revision of the law needed for this situation.