• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.82-85
• /
• 2001

본 논문에서는 S밴드(2-4 GHz)와 C밴드(4-8 GHz)에서 사용가능한 비동심원 복사구조와 저임피던스 급전구조를 갖는 광대역 원형 링슬롯 안테나를 제안하였다. 본 안테나는 유전율 4.3, 두께 1mm의 기판을 대상으로 해석되었다. 재안된 안테나의 계산된 임피던스 대역폭은 122%(S$_{11}$$\leq$-10 dB)이므로 기존의 원형 링슬롯 안테나보다 훨씬 광대역이다. 또한 주요 설계변수들을 변화시켰을 때 변경되는 안테나의 특성을 연구함으로써 최적화설계에 도움이 되도록 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1940-1945
• /
• 2006

The small and wideband annular ring slot antenna with eccentric radiating structure and low impedance feedline is presented. This antenna is analyzed by using substrate with permittivity 4.3 and thickness 1mm. As the measured impedance bandwidth of proposed antenna is $118%(S_{11}{\leq}-10dB)$, its bandwidth is much broader than that of conventional annular ring slot antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.828-833
• /
• 2007

A small monopole antenna with a novel impedance matching structure is proposed in this paper. The proposed antenna is designed for W-LAN(IEEE 802.11b). The antenna design concept is based on a ${\lambda}/8$ folded monopole antenna with a self-impedance matching structure. The size of the proposed antenna is smaller than the resonant length, thus the impedance at the terminal of the antenna becomes very capacitive. To compensate fur this impedance mismatching, the proposed antenna employs a novel self-impedance matching structure. The self-impedance matching structure is located on the top of the antenna; it improves the impedance matching and ultimately the efficiency of the antenna. The measured results of the proposed antenna show reasonable agreement with prediction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1084-1096
• /
• 2016

This paper presents method of design and analysis of a high-speed serial interface connector with a data rate of 12.5 Gbps. A high-speed serial interface connector is composed of various material and complex structures. It is very difficult to match the impedance of each discontinuous portion of connector. Therefore, this paper proposes the structure of a connector line that be simplified a connector. In the structure of proposed connector line, this research presents a method for extracting R, L, C and G parameters, analyzing the differential mode impedance, and minimizing the impedance discontinuity using time domain transmissometry and time domain reflectometry. This paper applies the proposed methods in the connector line to the high-speed serial interface connector. The proposed high-speed serial interface connector, which consists of forty-four pins, is analyzed signal transmission characteristics by changing the width and spacing of the four pins. According to the analysis result, as the width of the ground pin increases, the impedance decreases slightly. And as the distance between the ground pin and the signal pin increases, the impedance increases. In addition, as the width of the signal pin increases, the impedance decreases. And as the distance between the signal pin and the signal pin increases, the impedance decreases. The impedance characteristic of initial connector presents ranges from 96 to $139{\Omega}$. Impedance characteristic after applying the structure of proposed connector is shown as a value between 92.6 to $107.5{\Omega}$. This value satisfies the design objective $100{\Omega}{\pm}10%$.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.110-113
• /
• 2009

본 연구에서는 무선센서노드을 이용하여 강판형 철도교량의 전형적인 손상유형인 거더부의 휨강성 저하와 지점부의 볼트풀림을 효과적으로 모니터링할 수 있는 하이브리드 모니터링 기법을 제안하였다. 이를 위해 다음과 같은 연구가 수행되었다. 첫째, 본 연구진에 의해 개발된 가속도 및 임피던스기반 무선센서노드를 간략하게 소개하였다. 둘째, 가속도 및 임피던스 신호를 이용하여 효과적인 손상모니터링이 가능한 기법들을 선정하였다. 마지막으로, 개발된 가속도 및 임피던스기반 무선센서노드를 모형 강판형 철도교에 설치하고, 일련의 손상 시나리오에 따른 하이브리드 모니터링을 수행하여 무선센서노드 및 모니터링 기법의 성능을 평가하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.67-71
• /
• 2010

This paper proposes new dual-band impedance transformers based on the L-section circuit topology. The proposed circuits consist of a transmission line section with a stub line either at the source or at the load end. The dual-band operating conditions are analyzed in detail and simple design equations are derived in terms of the line lengths and impedances for the different circuit topologies and load conditions. The dual-band operation is confirmed through the design, fabrication and measurement in microstrip circuits based on the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.149-156
• /
• 2012

In this study, we propose a novel transmission line employing inverted PACD (Periodically Arrayed Capacitive Devices) for application to a development of miniaturized passive components on MMIC. The novel microstrip line employing Inverted PACD structure showed a loss much lower than conventional microstrip line. Using the inverted PACD structure, we fabricated a miniaturized impedance transformer on MMIC. the size of the impedance transformer was 0.012 $mm^2$, which is only 1.7% of conventional one. The impedance transformer showed good RF performances in a frequency range of 2.25~6.5 GHz.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.179-190
• /
• 2022

In this study, we investigated the characteristic impedance and bandwidth of CPW3DCS (coplanar waveguide employing periodic 3D coupling structures), and examined its potential for the development of a marine radio communication FISoC (fully-integrated system on chip) semiconductor device. To extract bandwidth and characteristic impedance of the CPW3DC, we induced a measurement-based equation reflecting measured insertion loss, and compared the measured results of the propagation constant β and characteristic impedance with the measured ones. According to the results of the comparison, the calculated results show a good agreement with the measured ones. Concretely, the propagation constant β and characteristic impedance exhibited an maximum error of 3.9% and 6.4%, respectively. According to the results of this study, in a range of LT = 30 ~ 150 ㎛ for the length of periodic structures, the CPW3DC exhibited a passband characteristic of 121 GHz, and a very small dependency of characteristic impedance on frequency. We could realize a low impedance transmission line with a characteristic impedance lower than 20 Ω by using CPW3DCS with a line width of 20 ㎛, which was highly reduced, compared with a 3mm line width of conventional transmission line with the same impedance. The characteristic impedance was easily adjusted by changing LT. The above results indicate that the CPW3DC can be usefully used for the development of a wireless communication FISoC (fully-integrated system on chip) semiconductor device. This is the first report of a study on the bandwidth of the CPW3DC.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1855-1857
• /
• 2003

부분방전시험은 고전압 고정자 권선의 절연상태를 검사, 평가 할 수 있는 중요한 수단이다. 전동기와 발전기에서 일어나는 절연 악화의 징후로써 부분방전이 발생되며, 이러한 부분방전 신호를 검출하기 위한 센서로 SSC(Stator Slot Couple)를 사용한다. 하지만 현재 사용되고 있는 대부분의 SSC의 경우 설계에 있어 특성 임피던스가 실제구조에서 정확히 고려되지 않는 경향이 있다. 실제로 고정자 슬롯에 부착된 마이크로스트립 센서의 특성 임피던스는 정확히 50옴으로 정합 되지 않으며 이것은 센서의 성능에 중요한 영향을 미치게 된다. 그러므로 본 논문에서는 부분방전 센서의 성능을 개선시키기 위해 결합 전송선로(Coupled transmission line)를 이용한 임피던스 정합회로를 제안하고자 한다. 제안된 센서의 성능을 입증하기 위하여 고정자 슬롯에 설치된 기존의 SSC와 임피던스 정합회로를 부착한 센서를 시뮬레이션 한 후 비교 분석하였다. 결과적으로 제안된 정합 회로는 광대역 임피던스 정합 특성을 가지며 임피던스 부정합 때문에 일어나는 기존 SSC의 성능 악화를 개선할 수 있었다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.58-61
• /
• 2009

최근 직물전극을 의복에 적용하여 의복을 착용한 상태에서 심전도, 심박과 같은 생체신호를 측정하는 방법이 다양하게 연구되고 있다. 그러나 대부분 직물전극의 경우, 높은 임피던스와 피부-전극 간의 불안정한 접촉으로 인해 생체신호를 측정하는 것은 매우어렵다는 문제점들이 지적되어 왔다. 이 논문에서는 피부-전극 간의 접촉을 향상시키기 위한 전극의 구조를 고안하여 의복에 적용함으로써, 착용자의 피부와 직물전극간의 접촉을 안정화 시킨 후, ECG(Electrocardiogram)를 측정하였다. 본 연구의 실험에 사용한 전극의 특성 분석 방법으로는 전극의 임피던스와 그에 따른 ECG 를 측정하여 SNR 분석을 실시하였다. 직물전극의 두 가지 구조와 직물전극과 트랜스미터 연결 스냅간 접촉 방식에 따른 ECG 측정을 비교한 결과, 전극 구조와 전도성 paste 사용 여부는 모두 ECG 측정에 영향을 미쳤다.