• The Korean Journal of Air & Space Law and Policy
• /
• v.12
• /
• pp.144-177
• /
• 2000

Our nation have several procedures and law for national airspace management, however those procedures and law not enough to manage airspace. Therefore, I have studied this paper for improving flight safety and for providing economics flight of civcil aircraft and military aircraft, also, for increasing efficiency of airspace through systematic airspace management, additionally, for improving nation defense ability and for preventation our nation damage when occuring airspace problem. Nowaday. in using airspace. two theory which freely use theory and use theory under jurisdiction is opposed by every nation in worldwide. Consequently. we can realize every nation endeavour to increase their jurisdiction airspace. However. our nation is not still prepared to cope with other nation when occuring airspace trouble. because airspace definition is not prescribed on our aviation law. Therefore. several problems which are improved in our airspace management are presented on this paper. The presented matters are as follows. First, The airspace definition is not prescribed on aviation law and responsibility limit of airspace management is ambugious. Second. problem on structure of approach control area and special airspace, Third. problem on airway system. Fourth. civil agency and military agency apply respectively different regulation in establishment of aircraft flight route, To grasp these problems, considered the airspace conception, airspace classfication. legal character of airspace. our nation airspace state and management together with other nation airspace state and management. also compared our nation airspace management with other nation airspace management. And. improvement methods to solve problems which was appeared by comparing and analysis are presented on this paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.885-894
• /
• 2015

In this paper, it can be applied to a walkie-talkie, the RFID / USN 920 MHz band(917~923.5 MHz) and WiFi 2.4GHz band(2.4~2.483 5GHz) return loss is 10 dB over the band, on-board dual band with omni-directional radiation characteristics is proposed. The basic structure designed antenna is used meander monopole antenna. It was used as double stubs and tabs for antenna designs that meet the criteria proposed. The double stub and the tab affects the reactance of the antenna to form a common-mode and differential-mode in the stub to improve the antenna characteristics and return loss in the bandwidth, gain and radiation characteristics. The system size of walkie-talkie is $52{\times}77mm^2$, the size of the antenna is limited to $52{\times}15mm^2$, the thickness of FR4 dielectric substrate is 0.8 mm, FR4 dielectric constant 4.4 is used. For experimental results, the return loss is measured more than 10 dB, the maximum gain is measured 1.95 dB, the maximum bandwidth is measured 360 MHz, the radiation characteristic is measured omni-directional. By a walkie-talkie terminal design applying the results of the paper, the handset's price competitiveness and production efficiency can be improved.

• Journal of Aquaculture
• /
• v.9 no.3
• /
• pp.205-213
• /
• 1996

Experiments were carried out to investigate the effect of GnRH-analogue (GnRH-a) on the induction of ovulation in catfish, S. asotus. Fully matured female catfish ($250\~600\;g$) received a single intraperitoneal injection of GnRH-a ($50\~200\;{\mu}g/kg{\cdot}body$ weight) showed the successful induction of ovulation. More than $86\%$ of treated females were ovulated after injection of GnRH-a ($90\;{\mu}g/kg$) at $25{\pm}1^{\circ}C$. The majority of spawning took place within 22 to 25 hours after the injection. The gonadosomatic index (GSI) and pseudo-GSI in the group treated with $120\;{\mu}g/kg$ GnRH-a were $23-30\%$ and $18-21\%$, respectively. Average fertilization and hatching rates were $94\%\;and\;81\%$, respectively. Electron microscopically, gonadotrophs of maturing female catfish were characterized by the presence of numerous small, electron-dense granules of approximately $150\~300$ nm in diameter and a few larger, less electron-dense granules of approximately $800\~1000$ nm in size in their cytoplasm. Gonadotrophs of GnRH-a treated catfish showed that their was a distinct decrease in number of small and large granules. The rough endoplasmic reticulum was composed of numerous cisternae conspicuosly dilated to various degrees.

• Journal of the Korean School Mathematics Society
• /
• v.6 no.1
• /
• pp.65-85
• /
• 2003

The purpose of this research is to increase mathematical problem solving abilities VIa STAD evaluation after completing classes. to which ST AD group study is applied, and promoting the learning accomplishments of students by developing gradual self-leading learning materials about the research project on ' How to use an hour math class efficiently\ulcorner ' For this purpose, the items below were studied. Firstly, gradual self-leading learning materials were developed and applied which were composed of textbook abstracts, basic problems, developing problems and intensive problems rather than existing textbooks. Secondly, the ST AD group study model was selected and applied which invokes competitions among small groups of which learning goals were clear. individual responsibility was important. and successive opportunities were equal. The evaluation using STAD at each end of a chapter was announced instantly using the EXCEL scoring system. Though the results of experimental classes were limited in their size. experimental time, and class selection, there were meaningful changes in the aspect of being able to heighten the accomplishment desire of students by inducing voluntary competitions among small groups without any student omitted. As the result of applying this research to my class, the ST AD group study using gradual self-leading learning materials invoked the interests of students and increased learning accomplishments via increasing problem solving abilities in mathematics. The ST AD group study was easy to use by beginning teachers, and its process was simple. It increased interactions among students and learning motives because its compensation system was open to all students. Among various studying methods for small groups. STAD group study is expected to be widely used for mathematics classes.

• Proceedings of the Korean System Dynamics Society
• /
• 2003.08a
• /
• pp.83-108
• /
• 2003

한 산업에서 인력 수급을 전망하는 것은 인력의 수요자인 기업의 측면에서는 안정적인 인력 확보 전략을 수립하기 위해서, 공급자인 산업 종사자들에게 있어서는 자신들이 앞으로 진출해야할 산업의 매력도를 파악하기 위해서, 그리고 정부 차원에서는 관련 산업에 있어서 중복 투자의 방지와 효율적이고 균형 된 산업 발전을 위한 정책 수립을 위해서 매우 중요하다. 그러나 이러한 인력 수급 전망들은 종종 잘못된 시장 분석으로 인하여 인력의 과소 공급 또는 과잉 공급이라는 의도하지 않은 결과를 가져오는 경우가 있다. 이는 전체적인 시각에서 시장의 구조적 특성을 분석하기보다는 현상을 조사하는 수준에 머물거나 현재의 상황 또는 단일 산업만을 고려할 뿐 시간의 흐름에 따른 동태적 변화와 지연된 피드백의 효과, 그리고 관련 산업간의 유기적 연관관계를 반영하지 못한 채 단기적이고 단선적인 관점에서 인력 수급을 전망하는데 그 원인이 있다고 볼 수 있다. 특히, 다른 산업과의 연관 관계가 복잡하고 인력의 수요의 급증에도 불구하고 산업에서 요구하는 인력을 양성하기까지 많은 시간이 소요되는 첨단 산업 및 신생 산업에서의 경우 이러한 현상은 더욱 두드러지게 나타날 수 있다. 이러한 관점에서 본 논문은 변수간의 상호 동태적인 관계와 시간의 흐름에 따른 행태를 분석하는 데 용이한 SD 방법론에 기초하여 최근 빠르게 성장하고 있는 정보보호산업에서의 동태적인 인력 수급 모델을 구현하여 향후 국내 정보 보호 인력의 수급 행태가 어떻게 전개될 것인지를 분석해 보았으며 이를 통하여 동태적 시각에서 인력 수급 불균형 현상의 원인을 파악하고 문제 해결을 위한 대안을 제시하고자 한다.채취하여 임신진단키트(제네디아프로테 트, 녹십자)를 이용하여 임신여부를 1차적으로 확인하였다. 과배란을 유기한 13두의 공란우중 9두(69.2%)가 과배란 반응을 나타내었으며, 회수된 수정란 51개중 이식가능수정란은 38개(74.5%) 였다. 발정동기화를 유도한 수란우 40두중에서 35두(87.5%)가 발정이 동기화되었으며, 그 중 황체검사를 통하여 30두의 수란우에 수정란을 이식하였다. 수정란이식후 13일(발정주기 21일)에 혈액을 이용한 임신진단에서 농가별 수태율은 각각 37.5%, 70.0%, 60.0% 및 71.4% 로서 평균 60.0%를 나타내었다.서 39$^{\circ}C$, 5% $CO_2$ 배양기에 48시간 배양하면서 생존여부를 판단하였다. 실험 2에서 확장배반포배 수정란이 25.3%의 생존율을 나타내었으며, 실험 1과 실험 3에서는 수정란의 형태와 관계없이 생존성을 확인할 수 없었다. 이상의 결과로 보아 glycerol 완만동결에서는 확장배반포기 수정란 이상이 보존가능한 것으로 추정되나 더 추가적인 연구가 요구된다.c kinase 활성의 변동은 정소 내 간충조직, 세정관 상피의 증식 및 기능적 분화 과정을 매개하는 생리적 활성분자 수용체 하위의 신호전달 과정에 Src-Csk loop에 의한 조절가능성을 확인할 수 있었다.rugrene의 향기성분이 주요 성분군으로 확인되었다. 2. 생강나무에서 생강의 향기를 발산하는 성분으로는 $\beta$-myrcene, o-terpinolene, phellandrone, ι-limonene, $\beta$-eudes

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.17-31
• /
• 2004

This paper proposes an algorithm for the robust transmission of video in error Prone environment using multiple description codingby optimal split of DCT coefficients and rate-distortionoptimization framework. In MDC, a source signal is split Into several coded streams, which is called descriptions, and each description is transmitted to the decoder through different channel. Between descriptions, structured correlations are introduced at the encoder, and the decoder exploits this correlation to reconstruct the original signal even if some descriptions are missing. It has been shown that the MDC is more resilient than the singe description coding(SDC) against severe packet loss ratecondition. But the excessive redundancy in MDC, i.e., the correlation between the descriptions, degrades the RD performance under low PLR condition. To overcome this Problem of MDC, we propose a hybrid MDC method that controls the SDC/MDC switching according to channel condition. For example, the SDC is used for coding efficiency at low PLR condition and the MDC is used for the error resilience at high PLR condition. To control the SDC/MDC switching in the optimal way, RD optimization framework are used. Lagrange optimization technique minimizes the RD-based cost function, D+M, where R is the actually coded bit rate and D is the estimated distortion. The recursive optimal pet-pixel estimatetechnique is adopted to estimate accurate the decoder distortion. Experimental results show that the proposed optimal split of DCT coefficients and SD/MD switching algorithm is more effective than the conventional MU algorithms in low PLR conditions as well as In high PLR condition.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.4
• /
• pp.431-440
• /
• 2013

In this study, a standard tensile welded-joint test was conducted to select a welding electrode suitable for recently developed HSA800 steel. Two welding electrodes were available at the time of this study; one was GMAW-based and the other FCAW-based. The tensile test specimens were fabricated by joining 60mm-thick HSA800 plates according to the AWS-prequalified groove welded joint details. Specimens which violate the standard root opening distance (ROD) were also included to see if poor construction tolerance could be accommodated. During fabrication, serious concerns about the welding efficiency of the GMAW-based product were raised by a certified welder. Both welding electrodes showed satisfactory and similar performance from welded joint strength perspective. But groove welded joints made by using the FCAW-based rod consistently showed more ductile and stable behavior. The AISC provisions for PJP joint strength were shown to be very conservative under direct tensile loading. Violating the AWS prequalified ROD by 100% apparently passed the strength criteria, but unusual crater-like fracture surface was observed.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.81-90
• /
• 2009

The safety management of a road network comprises four basic inter-related components：identification of sites(black spot) requiring safety investigation, diagnosis of safety problems, selection of feasible treatments for potential treatment candidates, and prioritization of treatments given limited budgets(Persaud, 2001). Identification process of selecting black spot is very important for efficient investigation of sites. In this study, the accident prediction model for EB method was developed by using accident data and geometric conditions of black spots selected from four-leg signalized intersections in In-cheon City for three years (2004-2006). In addition, by comparing the rank nomination technique using EB method to that by using accident counts, we managed to show the problems which the existing method have and the necessity for developing rational prediction model. As a result, in terms of total number of accidents, both the counts predicted by existing non-linear regression model and that by EB method have high good of fitness, but EB method, considering both the accident counts by sites and total number of accident, has better good of fitness than non-linear poison model. According to the result of the comparison of ranks nominated for treatment between two methods, the rank for treatment of almost sites does not change but SeoHae intersection and a few other intersections have significant changes in their rank. This shows that, with the technique proposed in the study, the RTM problem caused by using real accident counts can be overcome.

• Journal of the Korean Vacuum Society
• /
• v.10 no.4
• /
• pp.431-439
• /
• 2001

In this paper, the a-Diamond films were synthesized using filtered vacuum arc source (FVAS), FVAS was composed of a torus structure with bending angle of 60 degree. The radius of torus was 266 mm, the radius of plasma duct was 80 mm and the total length was 600 mm. The magnet parts were composed of one permanent magnet and five solenoid magnets. The plasma duct was electrically isolated from the ground so that a bias voltage could be applied. The baffles inside plasma duct were installed in order to prevent the recoil effect of macro-particles. Cathode was made of graphite with 80 mm in diameter. The effects of solenoid magnet on plasma extraction were investigated by computer simulation and experiment using Taguchi's methode. The source and extraction magnet affected the arc stabilization. The extraction beam current was maximized with low value of the source magnet current and high value of the filtering magnet current. The beam current density was 3.2 mA/$\textrm{cm}^2$ and average deposition rate was 5 $\AA$/sec when the currents of arc discharge, source, extraction, bending, deflection and outlet magnet were 30 A, 1 A, 3 A, 5 A, 5 A, and 5 A, respectively. The beam current density and the efficiency of beam transportation were increased with the positive bias voltage of the plasma duct.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.879-883
• /
• 2005

우리나라는 하천유역의 도시화 추세 속에 불투수층의 증가로 빗물의 일시 유출로 인한 홍수발생으로 많은 인명과 재산피해가 발생하고 있어 방재적 차원에서의 수자원관리가 시급한 실정이다. 또한, 초기 빗물과 합류식 하수도의 월류수에 의한 하천, 호소, 및 습지의 수질오염문제도 많이 발생하고 있다. 이러한 문제를 해결하기 위하여 콘크리트로 제작된 PC 지하식 빗물저류시설로서 상부의 공간은 공원, 운동장, 주차장 등 다양하게 이용하면서 방재와 치수를 가능케 할 수 있다. 또한, PC 콘크리트 빗물저류조는 현장 타설이 아닌 PC콘크리트 블록을 현장에서 조립하여 시공기간이 대폭적으로 단축되고, 작업환경 및 주변환경을 개선시킬 수 있다. 또한, 지하수의 보전, 회복을 위한 빗물저류 침투 시설 역할도 수행하여 비상용수를 확보하고 여름철 홍수 시 빗물을 가두어 재해를 방지하는 등의 다목적 시설로 활용된다. 지하 매립형 빗물저류조는 기존의 암거설계기준을 참조하여 일본의 내진설계 기준을 반영하였으며, 고강도 콘크리트를 사용하여 강도 또한 뛰어나다. 그리고 시공이 간편하고 공기의 단축에 탁월한 효과를 나타내며, 빗물저류조 설치는 다음과 같은 특징이 있다. 1. 지하저류형 빗물저류조 시설로 설계되어 토지의 효과적인 이용이 기대된다. 2. 공사기간이 짧아 경제적이다. 3. 안정된 구조체이다. 4. 부지의 형태에 맞춘 시공이 가능하다. 5. 소규모에서 대규모의 유수지까지 광범위하게 대응이 가능하다. 6. 방재역할 수행 및 빗물이용의 역할을 담당할 수 있다. 7. 불투수층이 증가하고 있는 도시지역에서 적극 활용가능하다.로 판단된다.한 예비방류의 시행과 강우종료 후에도 이수용량에는 손실이 없는 저수지의 관리방안의 지침이 되는데 효율적이라 판단되었다. 방법을 개발하여 개선시킬 필요성이 있다.>$4.3\%$로 가장 근접한 결과를 나타내었으며, 총 유출량에서도 각각 $7.8\%,\;13.2\%$의 오차율을 가지는 것으로 분석되어 타 모형에 비해 실유량과의 차가 가장 적은 것으로 모의되었다. 향후 도시유출을 모의하는 데 가장 근사한 유출량을 산정할 수 있는 근거가 될 것이며, 도시재해 저감대책을 수립하는데 기여할 수 있을 것이라 판단된다.로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며