• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.179-195
• /
• 2010

In the internal connection system, the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. The purpose of this study was to assess the loading distributing characteristics of three different abutments for GS II$^{(R)}$ implant fixture(Osstem, Korea) under vertical and inclined loading using finite element analysis. Three finite element models were designed according to three abutments; 2-piece Transfer$^{TM}$ abutment made of pure titanium(GST), 2-piece GoldCast$^{TM}$ abutment made of gold alloy(GSG), 3-piece Convertible$^{TM}$ abutment with external connection(GSC). This study simulated loads of 100N in a vertical direction on the central pit(load 1), on the buccal cusp tip(load 2) and $30^{\circ}$ inward inclined direction on the central pit(load 3), and on the buccal cusp tip(load 4). The following results were obtained. 1. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture and lower stress was taken at the cancellous bone. 2. When off-axis loading was applied, high stress concentration observed in cervical area. 3. GSG showed even stress distribution in crown, abutment and fixture. GST showed high stress concentration in fixture and abutment screw. GSC showed high stress concentration in fixture and abutment. 4. Maximum von Mises stress in the surrounding bone had no difference among three abutment type. In GS II$^{(R)}$ conical implant system, different stress distribution pattern was showed according to the abutment type and the stress-induced pattern at the supporting bone according to the abutment type had no difference among them.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.431-440
• /
• 2014

To propose the improvement and management plans to strengthen the pollutant removal efficiency of dam reservoir's constructed wetlands(CWs), the operation status and configuration of CWs (including water depth, operational flow, water flow distribution, residence time, and pollutant removal efficiency, aspect ratio, open water/vegetation ratio etc.) were analyzed in 10 major wetlands constructed in dam reservoirs. The pollutant concentrations in the inflows of the studied CWs were lower than those of American and European constructed wetlands. Especially, organic matter concentrations in all of inflows were below 3 mg/L(as BOD) due to advanced treatment of sewage disposal plant and an intake of low concentration water during dry and normal seasons. The average removal efficiency of total nitrogen(TN) and total phosphorus(TP) for 10 CWs ranged from 7.6~67.6%(mean 24.9%) and -4.9~74.5%(mean 23.7%), respectively, showing high in wetlands treating municipal wastewater. On the other hand, the removal efficiency of BOD was generally low or negative with ranging from -133.3 to 41.7%. From the analysis of the operation status and configuration of CWs, it is suggested that the low removal efficiency of dam reservoir's CWs were caused by both structural (inappropriate aspect ratio, excessive open water area) and operational (neglecting water-level management, lack of facilities and operation for first flush treatment, lake of monitoring during rainy events) problems. Therefore, to enable to play a role as a reduction facility of non-point source(NPS) pollutants, an appropriate design and operation manuals for dam reservoir's CW is urgently needed. In addition, the monitoring during rainy events, when NPS runoff occur, must be included in operation manual of CW, and then the data obtained from the monitoring is considered in estimation of the pollutant removal efficiency by dam reservoir's CW.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.215-221
• /
• 1976

In this study, noise arresting effect of the noise control room from the transmission of surrounding noise was tested when the packing noise control rooms were set up in the test room in which the prerecorded noise from an engine room was reradiated at the same level as the original pressure. The inner space of control room A is $3.389m^3(1.19\times1.19\times2.14m)$ having walls furnished with plywood board 9mm in thickness and noise control room door$(60\times45cm) $ and illumination lamp are placed. In case of the control room B, noise absorption board(10mm fiber board which holds the corntype concavity with diameter of 5mm, depth 5mm, space 15mm) is adhered to the internal ceiling and styrol foam boards(20mm) to the walls. The other struction is same as the control room A. Type C is the same as B except wool board(Glass Fiber, 33mm) on the walls. Type D is same as type A except that the thickness of wall is 12mm and wood pyramid type cone$(5\times5\times13cm)$ is adhered to the ceiling ana walls(Fig. 1). When the recorded noise and vibrated noise were controlled in various levels. The noise pressure which passed through the control rooms was measured by sound level meter(Bruel & Kjar 2205, measuring range 37-140dB). In order to calculate the absorption rate in the control rooms the noise pressure was measured at different distances when the recorded noise pressure was radiated. The followings are the results obtained from the experiment. 1. When the noise pressure of the test room was 60dB, transmission rate of type A was $69.7\%$ and increased $3.3\%$ per 10dB. At the same condition, the rate was $53.9\%$ and increased $4.5\%$ per 10dB in type D. Type D was the most effective in noise arresting of the four and the effect was D,C,B and A in order(Fig.2). 2. When the oscillator sound and vessels noise were radiated in 1,000Hz, at one meter distance to the type A and D, the oscillator sound pressure were 77dB and 73dB, while the vessels noise pressure were 73.3dB and 66.2dB respectivley(Fig.3). 3. Refering to the influence of the frequency to the lower oscillator sound(1,000Hz) pressure, both type C and D were almost same at 140cm but type C was 0.3dB lower than type D at 20cm distance(Fig.4).

• Sijohaknonchong
• /
• v.20
• /
• pp.141-171
• /
• 2004

Even though only 3 sijo are in high school textbook. through these 3 sijo each type can be understood in that each represents pyung sijo, sasul sijo, and present sijo. To learn with learner-centered activities, which aim for full knowledge acquisition regarding literary works, as the preparing stage, students can learn what theyll learn by teachers. Sijo are, so to speak, formed with three chapters, and stand for the world that is colorless, scentless, and flavorless. So, the theme can be found with ease. Compared with other genres, sijo can be formed creating background with ease. Moreover, sijo are not too long, so learners can paraphrase it. Sijo that express private experiences with the everyday language can be related to other genres or everyday language. So, sijo are last to present. In the teaching phase, on the gradation of concretion and gradation, writing or presentation activities are presented. After classroom, learners keep a reaction journal. In the phase of concretion and gradation, learners can apprehend that typical differences of the emotions of poetic speakers is from typical differences, even though emotions of poetic speakers of (1)$\cdot$(2)$\cdot$(3) that is each stand for pyung sijo, sasul sijo, and present sijo are roughly summarized loneliness, desolateness, and gloominess. Moreover, these typical differences are from social, political. and cultural settings, namely, the differences of contexts. In this teaching model. learners should prepare for content regarding context and text before the class. Teachers should act as an assistant to help learners pre-understand their subjective experiences and imaginations.

• Journal of Korean Classical Literature and Education
• /
• no.38
• /
• pp.139-173
• /
• 2018

In the study of Guunmong, which is one of the representative classical $17^{th}$ century novels of the Joseon Dynasty, interpretations through The Book of Change(Juyeok) have recently emerged. It is necessary to more concretely investigate the themes of the research. The writer Kim man-jung wrote the work in an exile situation. In that time he composed a poem using Chinese letters with meaning connected to The book of Change. In particular, the discourse of Bok-gwae(復卦, ䷗) concentrating on the meaning of recovery might be a basis to construct the inner world of the work. The sentence of 'Bok goes well' in The Book of Change suitably match up with the hero's life in Guunmong. In addition the sentences of 'There is no illness in going and coming. So it will be no faults if friends arriver' can be applied to the meeting between the hero and heroines of Guunmong. The general declarations of The Book of Change are appropriate for explaining the contents of Guunmong. There are six Hyos that make up Gwae. The Hyos, from the first one at the bottom to the fifth one up above, connect to the characters of Guunmong. The phrase of 'Not going far away' regarding to the first Yang Hyo can be connected to Yang So-yu, hero of Guunmong. The phrase of 'Recovering beautifully' with regard to the second Eum Hyo can also be realized in the life of Jeong Gyeong-pae and Ga Chunun, two heroines of the work. The phrase of 'Danger owing to frequently recovering' regarding the third Eum Hyo can be applied to the position of Gye Seom-weol and Jeok Gyeong-hong. The phrase of 'Going middle with recovering alone' regarding the forth Eum Hyo can be matched with Sim Yo-yeon and Baek Reung-pa. The phrase of 'No regrets during an intense recovery' with regard to the fifth Eum Hyo is applicable to Yi So-hwa and Jin Chae-bong. The phrase of 'Boding of a confused recovering' regarding the sixth Eum Hyo is related to the writer's situation. The boding of confused recovering is owing to anti-royal road. The contrast between the royal road and the anti-royal road reflects Confucianism and Buddhism, dream and reality, and Yang So-yu in a dream and Seong Jin, who is same hero, in reality. Moreover, the structure of Guunmong which is organized in the form of reality-dream-reality, has a basis in this contrast. Considering these relationships, we can say the classical novel Guunmong is a fable of Bok-gwae. The work is a hopeful narration of an effective recovery that the writer anticipated in exile.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.618-626
• /
• 2019

Stem cell therapy is not expected to bestow any therapeutic benefit because of the low engraftment rates after transplantation.Various cell-carrying scaffolds have been developed in order to overcome this problem. When the scaffold is formed by 3-dimensional (3D) printing, it is possible to create various shapes of scaffolds for specific regions of injury. At the same time, scaffolds provide stem cells as therapeutic-agents and mechanically support an injured region. PCL is not only cost effective, but it is also a widely used material for 3D printing. Therefore, rapid and economical technology development can be achieved when PCL is printed and used as a cell carrier. Yet PCL materials do not perform well as cell carriers, and only a few cells survive on the PCL surface. In this study, we tried to determine the conditions that maximize the cell-loading capacity on the PCL surface to overcome this issue. By applying a plasma treated condition and then collagen coating known to improve the cell loading capacity, it was confirmed that the 3% collagen coating after plasma treatment showed the best cell engraftment capacity during 72 hours after cell loading. By applying the spheroid cell culture method and scaffold structure change, which can affect the cell loading ability, the spheroid cell culture methods vastly improved cell engraftment, and the scaffold structure did not affect the cell engraftment properties. We will conduct further experiments using PCL material as a cell carrier and as based the excellent results of this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2019

In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.78-91
• /
• 2018

Sangjogam, located in Goseong, Gyeongsangnam-do, was designated as Natural Monument #411, because of its diverse geological heritage, such as fossils, ripple marks, dykes, and columnar joints. In the area, Byeongpungbawi, with its beautiful columnar joints vertical to the bedding plane of the underlying sedimentary rocks and spectacular coastal view, was named after its overall shape reminiscent of a huge folding screen. The purpose of this study was to investigate the formation process of the columnar joints using the anisotropy of magnetic susceptibility (AMS) method. AMS measurements showed that the k1 and k3 values representative of directions of the long and short axes of a magnetic particle at each point strongly clustered, and the oblate magnetic foliation structure in Byeongpungbawi developed during sill-type intrusion rather than lava flow. In summary, Byeongpungbawi was produced by sill-type intrusion along the bedding plane of the underlying sedimentary layer, and the subsequent formation of columnar joints was accompanied by the cooling and contraction of intruding rhyolite magma. This study potentially provides a basic research tool in understanding the formation mechanism of columnar joints which are widely distributed in southern Korea.

• Journal of Korean Classical Literature and Education
• /
• no.39
• /
• pp.137-180
• /
• 2018

This article examines the constitutional characteristics of the works in the "Shinbi Apartment" (Mysterious Apartment) series produced by Tooniverse, a domestic animation channel, and considers the meaning of the contents of the ghoststory (鬼神談). The "Shinbi Apartment" series is a horror animation for children. It was produced for the first time in Korea and recorded high ratings. Additionally, it is different from Japanese horror animations that were dubbed and broadcast in Korea in terms of composition and narrative direction, and it succeeds in the form and direction of the traditional Korean ghost story. "Shinbi Apartment - The Secret of Ghost Ball" enriches narrative stories by embracing the structure of the "female ghost story" in traditional ghost stories while following the form of ghosts that suddenly pop up in the daily routines of contemporary ghost stories. The ghost's shape, which has a bizarre and unpredictable aspect, embodies the ghost as the object of fear that modern horror stories intend. However, it does not stop there, but puts the attention on the hero who focuses on the emerging ghost and listens and communicates with it, placing the emphasis of the story on communication, understanding, forgiveness, and reconciliation. The structure and contents of the unique story of "The Secret of Ghost Ball" contribute to the transformation of the ghost into a subject of friendliness and entertainment, not merely as one of shock, fear, and anxiety. Additionally, as the concept of "child" is being created, the custom of modernity, which deals with the story of ghosts in the dimension of teaching and edification, is also manifested in "The Secret of Ghost Ball." In other words, through the figure of the devil, it is to continue the lesson of the story by revealing the adventure, the courage necessary for the "child," and the boundaries for substance and appearance. The "Shinbi Apartment" series has also contributed to the success of ghosts as commercial contents. The structure of the story and its characters have been actively used as educational tools and toys for children. It can be said that ghost culture contributed to this popularization by establishing a base for enjoying ghosts for amusement and entertainment.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.