• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.97-103
• /
• 2016

The sensitivity of interior noise that the passengers perceive is comparatively high in the train, and structure-borne and air-borne types of noises come into the train. In this paper, to analyze contributions of these noise sources operational transfer path analysis(OTPA) is used. OTPA has some advantages of executing the contribution rates of several sources simultaneously, and in this work, 29 points are measured while running. Transfer functions between reference measurement points and response measurement points are calculated by the singular value decomposition(SVD) and Principal component analysis(PCA) method, and the frequency characteristics of the noise source are successfully derived. Also the interior noise is predicted and compared with measurement data to show the reliability.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.1-3
• /
• 1996

수중 트랜스듀서는 진동하는 물체위에 설치되어 다양한 외부 소음원이 유입되는 환경에 노출되어 있다. 외부 소음원으로는 선체 진동. 프로펠러 소음, 그리고 유동 유기 소음들을 들 수 있고, 트랜스듀서의 실제 작동시 이들의 레벨이 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 논문에서는 외부 소음원에 무관한 고 정밀, 저 소음 특성을 지닌 음향센서를 개발하기 위하여 유한요소법 (FEN)을 사용하여 소음 전달 특성을 분석하고, air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 구조를 개선한 음향센서의 설계 및 내소음성 평가를 하였다. 또한 사용한 음향 감쇠층의 최적 물성을 제시하고자 한다. 그 결과 센서 측면 하단부에 소음원이 위치할 경우 가장 큰 잡음 신호로 작용하며, 구조를 변경한 결과 기존 음향센서에 비해 55% 이상 내 소음성을 증진 시켰다. 그리고 음향 감쇠층의 최적 음향 임피던슨는 1 Mrayl 이하 혹은 4mrayl 이상으로 분석되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.481-482
• /
• 2012

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.293-306
• /
• 1991

During the last few years recommendations or regulations concerning permissible noise levels on shirts have been issued by the authorities in most countries. For these reasons the need for useful and accurate noise prediction computer programs has been emphasized. A noise prediction program can make it possible to find the most economical solution to achieve a certain noise requirement. This paper attempts to develop a noise prediction computer program using statistical energy analysis(SEA). In this paper, the SEA is used to predict the sound transmission loss for airborne noise and the vibration amplitude of the panel consisting of ship spaces such as floor, wall, and ceiling for structureborne noise. And in order to verify the prediction, a small passenger vessel, G/T120 tons, is selected. It has been shown that the prediction is capable of giving results in good practical agreement with measurements and therefore it is useful for predicting the nolle levels in ships and establishing the countermeasures at early design stage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.365-370
• /
• 2011

Structure-bone noise is an important aspect to consider during the design and development of a vehicle. Reduction of structure-bone noise of the compartment in a vehicle is an important task in automotive engineering. Many methods which analyze transfer path of noise have been used for structure-bone noise. The existing method to measure of frequency response function of transfer path has been tested by removing a source. This Paper presents an experimental analysis about Transfer Path Analysis of the vehicle interior noise according to Excitation or not. To identify these points of difference, experiment were conducted through an experimental test using simulation vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.476-481
• /
• 2013

Transfer path analysis(TPA) and operational deflection shape(ODS) have been widely utilized to analyze the characteristics of noise. TPA enables to decompose a noise into air-borne and structure-borne noises then estimate the path contribution of noise. ODS enables to analyze a moving shape and direction of interest components at a particular frequency. In this paper, TPA and ODS are applied to transfer paths of air-conditioner booming noise in a vehicle to reduce noise level, then a fixture is mounted it's path for distributing the high portion path contribution to the low portion path contribution. Through this experiment, the reduction of sound pressure level in air-conditioner booming noise is observed. Thereafter, TPA is again employed to verify the results of contribution.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1158-1165
• /
• 1998

Low frequency interior noise in cars is mainly due to structure-borne excitations which are related with road excitation and component vibrations such as suspension and engine mounts. In order to analyze the annoying interior noise. a technique (Transfer Path Analysis) is introduced to find a noise source and the path of that noise. In this study, TPA is reviewed theoretically and applied to investigate the case when the low frequency interior noise at front seat due to road excitations needs to be optimized. The subjective and objective appraisal was performed under the conditions that a testing vehicle traveled on asphalt at 30 km/h. so that the low frequency to be eliminated was detected. The related vibration and noise data for TPA were measured on running and static vehicle. The results reveal that the noise contribution along the z-direction of trailing arm is prominent to low frequency interior noise.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.90-94
• /
• 2021

With the increased interest on quiescent place for residential place, the noise generation from facilities needs to be minimized. One important noise source include sounds from operation of elevators. The elevator operates between floors and generates significantly annoying sounds to the nearby living spaces. It is recognized as the significant contributor inducing noise annoyance to residents. Elevator is supported to the building structure at several locations for movements between floors. In this study, the vibration reduction by use of polymer concrete on the support location was demonstrated. By measuring and comparing the vibration generation when supported on cement and polymer concrete, the noise reduction performance was evaluated. The polymer concrete was made in the form of being inserted into the wall that imitates the hoistway. The impact vibration was induced to the bracket and vibration transfer magnitude was measured. The damping ratio was evaluated through normalization and curve fitting of transient response, and comparison was performed for each resin mixing ratio. By use of polymer concrete, it was possible to reduce the vibration generation in an effect manner without sacrifice on the structural rigidity.

• Journal of the KSME
• /
• v.35 no.10
• /
• pp.886-895
• /
• 1995

근래들어 도시의 집중화와 고밀도화, 교통량의 증대 등 사회구조의 급격한 변화로 각종 소음원 들이 증가하고 있으며 소음에 대한 일반인의 관심도 점차 높아지고 있다. 건물의 경우 한정된 공간에서 거주자의 생활을 보다 쾌적하고 편리하게 하기 위해서 각종 설비들이 증가되고, 이들 설비들은 대용량화하는 추세에 있다. 건물내 공간의 기능을 능률적으로 유지하기 위해 설치된 각종 장비(공기조화기, 펌프, cooling tower, 보일러, 냉동기 \ulcorner 발전기 등)에서 발생하는 소음이 직접 실내로 투과되거나 이들이 발생하는 진동이 건물 구조체로 전달되어 실내소음을 야기시키는 경우가 많다. 따라서, 건물을 설계할 때는 실별 용도에 따라 허용소음도를 결정한후 이러한 실내 소음환경을 달성하기 위해 각종 조처를 강구하게 되는데, 이 글에서는 이러한 건물의 실내 소 음도 영향 평가의 하나로 특정 건물의 예를 들어 소음도 계산과 소음의 원인 및 대책에 관해 기술하고자 한다.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.97-102
• /
• 1999

Structure-borne noise is an important aspect to consider during the design and development of a vehicle. In this work. it was desired to identify the primary paths associated with structure-borne noise generated from the engine and front suspension. An experimental source-path-receiver model was used to characterize the system. A variety of primary sources such as engine. tires or exhaust system generate vibrations of the inner surfaces of the passenger compartment of a vehicle which subsequently radiate noise. The source was characterized by the force acting at the engine-to-body interface. and the path was characterized by pressure over force FRF's. The excitation forces were indirectly determined using dynamic stiffness of rubber mount or the system accelerance matrix. Through these analysis, path contribution diagram which is well expressed primary noise path is obtained.