• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.601-609
• /
• 2022

Jack-up drilling rigs are mobile offshore platforms widely used in the offshore oil and gas exploration industry. These are independent, three-legged, self-elevating units with a cantilevered drilling facility for drilling and production. A typical jack-up rig includes a triangular hull, a tower derrick, a cantilever, a jackcase, living quarters and legs which comprise three-chord, open-truss, X-braced structure with a spudcan. Generally, jack-up rigs can only operate in water depths ranging from 130m to 170m. Recently, there has been an increasing demand for jack-up rigs for operating at deeper water levels and harsher environmental conditions such as waves, currents and wind loads. All static and dynamic loads are supported through legs in the jack-up mode. The most important issue by society is to secure the safety of the leg structure against collision that causes large instantaneous impact energy. In this study, nonlinear FE -analysis and verification of the requirement against collision for 35MJ recommended by DNV was performed using LS-Dyna software. The colliding ship used a 7,500ton of shore supply vessel, and five scenarios of collisions were selected. From the results, all conditions do not satisfy the class requirement of 35MJ. The loading conditions associated with chord collision are reasonable collision energy of 15M and brace collisions are 6MJ. Therefore, it can be confirmed that the identical collision criteria by DNV need to be modified based on collision scenarios and colliding members.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2008

The differential settlement on ordinary concrete buildings and paved roads are often occurred and which caused the failure of structure. The grouting method can be used for correcting the settlement of the structure. However, the grouting method has a disadvantage like that it takes a long time period to get a desired strength, and it is not a continuous in the phase of reinforced effect. In this paper, as an injecting material called GPCON to complement disadvantage, it is estimated about the characteristic that has a high-density expansion. With the changing of ground conditions and amount of injection, the change of physical strength on compression, the stability against chemical material are studied through the filming of SEM. The physical strength with compression is developed to high strength due to mixing with other material. It is not react with most of the material on chemical conditions except the component of alcohol. Through the SEM test. it is confirmed that the strength of material was increased as formation is being densified.

• Journal of Korea Water Resources Association
• /
• v.41 no.4
• /
• pp.445-454
• /
• 2008

Many countermeasures for local scour at bridge piers constructed on the river and sea have been developed and researched to protect piers against local scour. The most commonly employed method is riprap protection, which is sometimes required the filter installation between riprap and base layers. However, the construction of stone filters are really hard to perform in the field, require the high cost, or sometimes are impossible. The experimental modeling is conducted to analyze the riprap failure modes and the stability of riprap protection without filters based on the different approach velocity and riprap layer thickness conditions. Also, the stability index to evaluate the performance of riprap protection is developed using the experimental results. The cover and thickness of the riprap layer play a very important role in the stability and thicker riprap layers can prevent a total disintegration of the riprap layer effectively, especially due to winnowing failure.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.50-54
• /
• 2002

The plate bucking is very important design criteria when the ship is composed of high tensile steel plates. The structures under the action of excessive exhibit local failure associated with bucking until they reach the ultimate limit state as a whole. Precise assessment of the behaviour of plate above primary buckling load is important. In this connection, series of elastic plastic large deflection analyses are performed on rectangular plates with aspect ratio 1.4 applying the finite element method. In this paper, the buckling/plastic collapse behavior of ship plates with secondary buckling is investigated. It has found that the other deflection componentes also increase with the increase of compressive load above the primary buckling load.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.17-25
• /
• 1991

A foundation excavation is necessarily included in construction works of structures. Involving the dangers of collapse, large-scaled excavation walls require periodic deformation measurements. As only relative displacements and acquired and surface measurements can not be made with the conventional measuring methods, the up-to-date method which can overcome these weaknesses is required urgently. Terrestrial photogrammetry is the method by which absolute deformation amounts of many points can be taken out at a distance from object in short time. The objective of this study is to suggest application propriety of terrestrial photogrammetry to the measurement of excavation walls. For it, we devised same position photography(S.P.P) and possibility of SPP proved through basic experiment. SPP was very speedy photographing method. We found out the fact that as the degree of overlap increase, accuracies of results increase. As a result of applying to excavation side-wall, we detected consistent displacement in 3 dimension each direction within the limits expectional accuracy. If control surveying could be carried out more quickly and accurately, the deformation displacement could be analyzed more effectively.

• Applied Microscopy
• /
• v.2 no.1
• /
• pp.17-31
• /
• 1972

Light and electron microscopic studies were made to investigate the morphological changes in growing galls on the leaf of Lycium chinense MILL caused by Eriophyes kuko Kishda. The results are summarized as follows: 1. Light microscopy At the early stage of the invasion of E. kuko on the back side of the young leaf of L. chinense, the.epidermal cells become hypertrophic and develope a gall. As the gall grows, the cells of both palisade and spongy-layers become hypertrophic and these tissues are hard to be distinguished because of their irregular outgrowth. As the gall grows, the nuclei of the gall also become hypertrophic and larger than these of normal cells. 2. Electron microscopy Under electron microscopy the mitochondria, the golgi apparatus and the plastids of the advanced galls are degenerated and disintergrated and the cell walls become thicker than normal ones. The characteristic star bodies and the ring-form structures are found in the mature gall cells.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.211-217
• /
• 2007

Due to advanced new weapons and changes in the combat environment, survivability improvement methods for naval ship design have continuously evolved. Surface naval ships are easily detected by the enemy and, moreover, there are many attack weapons that may be used against surface naval ships. Therefore, it is important for modem naval ships, especially combat naval ships, to ensure survivability. In order to design a naval ship considering survivability, the designers are required to establish reasonable attack scenarios. An explosion may induce local damage as well as global collapse of the ship. Therefore, possible damage conditions should be realistically estimated at the design stage. In this study, an ALE technique was used to simulate the explosion analysis, and the survival capability of damaged naval ships was investigated. Especially, the author have establish the simple method of estimation of survival time for damaged naval ships.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.45-50
• /
• 1999

The LPG refueling station's explosion at Bucheon city was a major accident which with rare frequency of occurrence and large damage effect. Therefore, to prevent similar accident in the future from LPG charging stations which located in urban area. It needs to identify the damage effects of such facilities by comparing theoretically quantities risk and actual damage. The BLEVE effects from the accident showed similar damage effect in case of heat flux, however, the overpressure level reflected at the reduced distance by $15\%$. The structure damage to the near by area showed comparatively large heat radiation damage to the concrete structure strength and shape changes through heat flux while the overpressure effect was small.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.476-476
• /
• 2017

최근 갑작스런 폭우로 인한 제방 붕괴, 침수 및 지진 등과 같은 재해 발생 시 추가 피해를 방지하고 주민들의 긴급대피를 도운 건 SNS를 통한 현장 정보와 경보 메시지의 지속적인 전파이다. 최근의 SNS는 재난정보에서도 활용할 수 있을 정도로 진화하였다. 국가재난정보 중 수재해 관련 정보를 추출하여 다양한 주제도위에 중첩으로 공간정보를 제공할 수 있는 재난정보 제공을 위한 웹서비스를 개발하고자 하였다. 수재해 정보를 필터링하기 위하여 우선 관련된 키워드 선정이 필요하며, 기본적인 키워드는 하천일람표를 참고하여 6개 권역 및 하천이름을 선정하였다. 또한, 한강 홍수 통제소의 수자원 용어사전과 (사)한국물학술단체연합회에서 발간한 물용어집을 참고하여 수재해 관련 용어들 약 300여개를 추가하였다. 선정된 용어들은 1차적으로 적재된 데이터베이스에서 수재해 정보 관련 필터링을 하는데 사용되며, 비정형 데이터들을 필터링하고 주소 정보 검색 및 추출을 통하여 정형화 하게 된다. 추출된 주소정보에 대하여 개발한 지오코딩 모듈을 적용하여 수재해 항목에 대해 좌표정보를 업데이트 하게 된다. 가뭄, 집중호우, 홍수 등의 수재해 정보별, 또한 일자별 그룹화 및 구조화를 진행하고 해당되는 정보를 공간정보 오픈플랫폼 API를 활용하여 지도상에 가시화할 수 있다. 개발한 지오코딩 모듈을 이용하여 실제 테이블 정보를 구성하여 데이터베이스에 수재해 정보 지오코딩 테이블을 구성하여 테스트 모의하였다. 재난정보 중 홍수, 가뭄에 대한 선택정보와 시간정보를 매개변수로 받는 XML 웹서비스 테스트로 검증을 하였다. 본 연구를 통하여 재난정보 가시화에 있어서 사용자가 조회하고자 하는 유형별, 날짜별 선택이 가능한 공간적 정보를 검색 및 확인할 수 있게 되었다. 개발한 수재해 정보 지오코딩 모듈 프로토 타입은 수재해 정보 플랫폼 융합기술 연구단에서 개발하는 핵심 목표시스템 내 재난정보 제공시스템에 적용 가능하며, 수재해 정보에 대하여 대국민 서비스가 가능할 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.5-5
• /
• 2021

최근 기후변화로 인해 예측이 어려운 국지성 호우가 빈번하게 발생하고 있다. 국지성 호우는 대량의 홍수를 일으키고 산사태와 유송잡물을 동반한 흐름을 야기할 수 있으며 이로 말미암아 인근의 초목과 식생들로부터 유목(driftwood)이 발생하기도 한다. 유목이 흐름과 함께 떠내려 오게 되면 그로 인한 운동에너지가 크게 발생하게 되며, 수공구조물과 주택가옥 등에 충돌시, 순수한 수류의 충돌보다 훨씬 큰 손상을 주기도 한다. 또한 유목이 수공구조물 인근 하상에 군집하면 통수능을 저하시키기도 하며 식생효과와 마찬가지로 유목주변으로 유속이 증가하면서 세굴현상이 발생하게 되는데, 이는 하상저하를 일으키며 수공구조물의 안정성에 지속적으로 피해를 줄 수 있다. 특히 군집된 유목들이 교각에 충격을 주면 흐름방향으로 교각에 작용하는 외력을 증가시키게 되고 군집된 유목들이 다른 유목들을 연쇄적으로 포착하는 동시에 흐름을 지속적으로 방해하여 수위상승을 야기하게 된다. 이는 유목주변으로 세굴을 발생시켜 교량의 붕괴를 촉진시킬 수 있다. 일본의 경우에는 대부분의 하천유역의 경사가 매우 급하기 때문에 홍수발생시 산사태와 유송잡물들이 빈번하게 발생하고 있다. 그에 따라 대량의 유목들이 하천으로 유입되어 하천의 수공구조물과 주거지역에 심각한 피해를 주는 경우도 많다. 따라서 유목의 거동과 군집현상을 이해하여 사전에 유목거동의 예측과 유목과 하상변동의 상호작용 분석을 통해 유목에 의한 수리구조물 피해를 예측하는 연구들이 필요할 것으로 판단된다. 본 연구는 유목의 거동과 군집양상을 예측분석하기 위해 유목과 흐름의 이동상 실내실험과 수치해석을 수행하여 유목유입량에 따른 하상변동과 유목의 하상퇴적양상 및 다양한 거동을 관측분석 하였다. 특히, 유목간의 상호충돌과 측벽충돌을 고려하는 수치모듈을 유목동역학모형에 적용하여 수치해석을 수행하였다. 이를 통해 이동상 하상에서의 유목의 군집과정을 분석하고 수치해석의 한계와 개선사항들을 논의하였다.