• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.417-428
• /
• 2005

Today, IT organizations perform projects with vision related to marketing and financial profit. The objective of realizing the vision is to improve the project performing ability in terms of QCD. Organizations have made a lot of efforts to achieve this objective through process improvement. Large companies such as IBM, Ford, and GE have made over $80\%$ of success through business process re-engineering using information technology instead of business improvement effect by computers. It is important to collect, analyze and manage the data on performed projects to achieve the objective, but quantitative measurement is difficult as software is invisible and the effect and efficiency caused by process change are not visibly identified. Therefore, it is not easy to extract the strategy of improvement. This paper measures and analyzes the project performance, focusing on organizations' external effectiveness and internal efficiency (Qualify, Delivery, Cycle time, and Waste). Based on the measured project performance scores, an OT (Opportunity Tree) model was designed for optimizing the project performance. The process of design is as follows. First, meta data are derived from projects and analyzed by quantitative GQM(Goal-Question-Metric) questionnaire. Then, the project performance model is designed with the data obtained from the quantitative GQM questionnaire and organization's performance score for each area is calculated. The value is revised by integrating the measured scores by area vision weights from all stakeholders (CEO, middle-class managers, developer, investor, and custom). Through this, routes for improvement are presented and an optimized improvement method is suggested. Existing methods to improve software process have been highly effective in division of processes' but somewhat unsatisfactory in structural function to develop and systemically manage strategies by applying the processes to Projects. The proposed OT model provides a solution to this problem. The OT model is useful to provide an optimal improvement method in line with organization's goals and can reduce risks which may occur in the course of improving process if it is applied with proposed methods. In addition, satisfaction about the improvement strategy can be improved by obtaining input about vision weight from all stakeholders through the qualitative questionnaire and by reflecting it to the calculation. The OT is also useful to optimize the expansion of market and financial performance by controlling the ability of Quality, Delivery, Cycle time, and Waste.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.193-201
• /
• 2007

We used $^6Li$ and $^7Li$ MAS NMR to investigate the fate and local environments of Li in the interlayer of clay minerals such as hectorite, Woming-montmorillonite, beidellite, and lepidollite at room and high ($250^{\circ}C$) temperature. Although $^6Li$ NMR spectra show narrower peaks than those of $^7Li$ NMR, S/N ratio is low and there are no obvious differences in chemical shifts suggesting that it is difficult to apply $^6Li$ NMR to have information on the local environments of Li in the clay interlayers. $^7Li$ NMR spectra, however, show changes in the peak width and quadrupole patterns providing information on the local environments of Li in the interlayer even though changes in the chemical shift are not observed. In montmorillonite, two different local environments of Li are observed; one has a narrow peak with typical quadrupole patterns whereas another has a broad peak without those of the patterns. Changes in the peak width is also observed from broad to narrow in the $^7Li$ NMR spectra for beidellite but not for hectorite at high temperature. Our results suggest that the peak width change in the broad peak is attributed to the coordination changes in the water molecules around Li which is tightly bonded on the basal oxygen of Si tetrahedra as inner-sphere complexes. The narrow peak in montmorillnoite can be assigned to the Li bended as outer-sphere complexes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.80-92
• /
• 2007

Forest fire is the dominant large-scale disturbance mechanism in the Korean temperate forest, and it strongly influences forest structure and function. Moreover burn severity incorporates both short- and long-term post-fire effects on the local and regional environment. Burn severity is defined by the degree to which an ecosystem has changed owing to the fire. Vegetation rehabilitation may specifically vary according to burn severity after fire. To understand burn severity and process of vegetation rehabilitation at the damaged area after large-fire is required a lot of man powers and budgets. However the analysis of burn severity in the forest area using satellite imagery can acquire rapidly information and more objective results remotely in the large-fire area. Space and airbone sensors have been used to map area burned, assess characteristics of active fires, and characterize post-fire ecological effects. For classifying fire damaged area and analyzing burn severity of Samcheok fire area occurred in 2000, Cheongyang fire in 2002, and Yangyang fire in 2005 we utilized Normalized Burn Ratio(NBR) technique. The NBR is temporally differenced between pre- and post-fire datasets to determine the extent and degree of change detected from burning. In this paper we use pre- and post-fire imagery from the Landsat TM and ETM+ imagery to compute the NBR and evaluate large-scale patterns of burn severity at 30m spatial resolution. 65% in the Samcheok fire area, 91% in the Cheongyang fire area and 65% in the Yangyang fire area were corresponded to burn severity class above 'High'. Therefore the use of a remotely sensed Differenced Normalized Burn Ratio(${\Delta}NBR$) by RS and GIS allows for the burn severity to be quantified spatially by mapping damaged domain and burn severity across large-fire area.

• The Journal of the Korean bone and joint tumor society
• /
• v.7 no.4
• /
• pp.139-143
• /
• 2001

Purpose : Limb salvage for osteosarcoma of proximal tibia is challenging problem due to difficulties in mobilizing or retracting the main neurovascular structure, inadequate soft tissue coverage, and unsolved problem of patellar tendon reattachment to endoprosthesis. The authors analyzed the functional result of limb salvage using tumor prosthesis with medial gastrocnemius rotation plasty for osteosarcama of the proximal tibia. Materials and Methods : Eleven patients with histologically proven osteosarcoma of the proximal tibia, treated with adjuvant and neoadjuvant chemotherapy and limb salvage operation with tumor prosthesis between January 1992 and December 1998 at our Medical Center, were selected. There were 6 male and 5 female. Age ranged from 15 years to 23.7 years with an average of 23.7 years. Follow-up period ranged from 1 year to 4.5 years with an average of 2.5 years. The final functional result was evaluated using the method by ISOLS, 1993. The factors include pain, functional activities, emotional acceptance, use of external supports, walking ability and gait. Each of the factors has been scored from 0 to 5 depending on the appropriate description or data. The rating score is determined by dividing the individual factor scores into the total score and indicates percentage of normal function. Results : The overall functional result ranged from 53,3% to 86.7% with an average of 68.3% of normal function. In details, the averages were 82.5% for pain, 62.5% for functional activities, 67.5% for emotional acceptance, 77.5% for use of external supports, 62.5% for walking ability, and 57.5% for gait. The average range of motion of the knee joint was $5^{\circ}$ extension and $85^{\circ}$ flexion. Five patients have extension lag ranged from $5^{\circ}$ to $15^{\circ}$ with an average of $10^{\circ}$. Two patients suffered postoperative infection. One was treated with antibiotics injection only, but the other needed removal of the prosthesis and knee fusion. Both of them showed unsatisfactory result. C o n c l u s i o n : The overall functional result after limb salvage using tumor prosthesis with medial gastrocnemius rotational flap for osteosarcoma of the proximal tibia was relatively satisfactory in case of no postoperative infection. The patients were less satisfactory in functional activities, emotional acceptance and gait than pain, use of external supports due to limitation of motion and extension lag. More aggressive postoperative physical therapy and protection with brace for 6~9 months as well as surgical technique is mandatory for more satisfactory result.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.43-53
• /
• 2004

The current Korean Concrete Design Code(KCI Code) requires the minimum and maximum content of shear s in order to prevent brittle and noneconomic design. However, the required content of the steel reinforcement In KCI Code is quite different to those of the other design codes such as fib-code, Canadian Code, and Japanese Code. Furthermore, since the evaluation equations of the minimum and maximum shear reinforcement for the current KCI Code were based on the experimental results, the equations can not be used for the RC members beyond the experimental application limits. The concrete tensile strength, shear stress, crack inclination, strain perpendicular to the crack, and shear span ratio are strongly related to the lower and upper limits of shear reinforcement. In this research, an evaluation equation for the minimum content of shear reinforcement is theoretical proposed from the Wavier's three principals of the mechanics of materials.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.851-858
• /
• 2010

In this study, waste glass and bottom ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclaimed. In addition, because softening point of waste glass is less than $700^{\circ}C$ and bottom ash includes combustible material, it was possible to manufacture low-temperature sintering lightweight aggregates for energy saving at $800{\sim}900^{\circ}C$ that it is as much as 20~30% lower than sintering temperature of existing lightweight aggregates. Thermal conductivity of newly-developed lightweight aggregates was 0.056~0.105W/m. K and its porosity was 40.36~84.89%. A coefficient of correlation between thermal conductivity and porosity was -0.97, it showed very high negative correlationship. With this, we were able to verify that porosity is key factor to affect thermal conductivity. Microstructure of lightweight aggregates by $CaCO_3$ content and replacement ratio of bottom ash in the variation of temperature were that $CaCO_3$ content increased along with pore size while replacement ratio of bottom ash increased as pore size decreased. Specially, most pores were open pore instead of closed pore of globular shape when replacement ratio of bottom ash was 30%, and pore size was small about 1/10~1/5 as compared with case in bottom ash 0~20%. In addition, open pore shapes were remarkably more irregular form of open pore in $900^{\circ}C$ than $700^{\circ}C$ or $800^{\circ}C$ when replacement ratio of bottom ash was 30%. We reasoned hereby that these results will influence on absorption increase, strength and thermal conductivity decrease of lightweight aggregates.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.345-354
• /
• 2013

To understand the community structures of the vegetation of the beaches and coastal dunes of Seocheon-gun, Boryeong-si, Anmyeon-do, Taean-gun in Chungcheongnam-do and Buan-gun in Jeollabuk-do at the west coast of South Korea, a plant sociological vegetation survey was carried out to make a classification of correlation vegetation communities, a cluster analysis and an inorganic component analysis on the soil and plant body. Regarding the vegetation of the coastal dunes, plant communities were classified into 31 communities by correlation dominant species, and as a result of a cluster analysis on the vegetation communities, they were classified into five vegetation types such as Calystegia soldanella community, Rosa rugosa community, Imperata cylindrica community, Vitex tend community and Elymus mollis community. The soil pH was highest in Seocheon area ($7.54{\pm}1.18$) while lowest in Buan area ($6.29{\pm}2.15$), and regarding inorganic components, the nitrogen content was highest in Robinia while lowest in Imperata cylindrica. The soil PH of vegetation I was highest (8.23) among the five vegetation types, and the organic matter was lowest (71.58). As a result of CCA ordination analysis to examine the correlation among environmental factors, Calystegia soldanella community, Rosa rugosa community and Imperata cylindrica community among the five vegetation types were distributed while they were not affected by soil environmental elements, but Vitex tend community and Elymus mollis community were distributed mainly at the places with high $K^+$ content in the soil.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.1-16
• /
• 2012

Under the international business circumstance, global supply chain management is considered a vital strategic challenge to small and medium-sized enterprises(SMEs) suffering from deficient resources and capabilities to exploit overseas markets comparing with large corporations. That is because they can expand their business domains into overseas markets by establishing strategic alliances with global supply chain partners. Although a wide range of previous researches have emphasized the cooperative networks in the chain, most are ignoring the importance of developing relational characteristics such as trust and reciprocity with the partners. Besides, verifying the relational factors influencing firms' export performances, some studies proposed different and inconsistent factors. According to the social capital theory, which is the social quality and networks facilitating close cooperation of inter-individual and inter-organization, provides the integrated view to identify the relational characteristics in the aspects of network, trust and reciprocal norm. Meanwhile, a number of researchers shows that global entrepreneurship is the internal and intangible resource necessary to promote SMEs' internationalization. Upon closer examination, however, they cannot explain clearly its influencing mechanism in the inter-firm cooperative relationships. This study is to verify the effect of social capital accumulated within global supply chain on SMEs' qualitative and quantitative export performance. In addition, we shed new light on global entrepreneurship expected to be concerned with the formation of social capital and the enhancement of export performances. For this purpose, the questionnaires, developed through literature review, were collected from 192 Korean SMEs affiliated in Korean Medium Industries Association and Global Chief Executive Officer's Club focusing on their memberships' international business. As a result of multi-regression analysis, the social capital - network, trust and reciprocal norm shared with global supply chain partner - as well as global entrepreneurship - innovativeness, proactiveness and risk-taking - have positive effect on SMEs' export performances. Also global entrepreneurship affects positively social capital which has mediating effect partially in the relationship between global entrepreneurship and performances. These results means that there is a structural process - global entrepreneurship(input), social capital(output), and export performances(outcome). In other words, a firm should consistently invest in and develop the social capital with global supply chain partners in order to achieve common goals, establish strategic collaborations and obtain long-term export performances. Furthermore, it is required to foster the global entrepreneurship in an organization so as to build up the social capital. More detailed practical issues and discussion are made in the conclusion.

• Korean Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.145-153
• /
• 2013

It is a global trend that the water management policy is shifting from a water quality-oriented assessment to the aquatic ecosystem-based assessment. The majority of aquatic ecosystem assessment systems were developed solely based on physicochemical factors (e.g., water quality and bed structure) and a limited number of organisms (e.g., plankton and benthic organisms). Only a few systems use plants for a health assessment, although plants are sensitive indicators reflecting long-term disturbances and alterations in water regimes. The development of an assessment system is underway to evaluate and manage lakes as ecosystem units in the Korean Ministry of Environment. We reviewed the existing multivariate health assessment methods of other leading countries, and discussed their applicability to Korean lakes. The application of multivariate assessment methods is costly and time consuming, in addition to the correlation problem among variables. However, a single variable is not available at this moment, and the multivariate method is an appropriate system due to its multidimensional evaluation and cumulative data generation. We, therefore, discussed multivariate assessment methods in three steps: selecting metrics, scoring metrics and assessing indices. In the step of selecting metrics, the best available metrics are species-related variables, such as composition and abundance, as well as richness and diversity. Indicator species, such as sensitive species, are the most frequently used in other countries, but their system of classification in Korea is not yet complete. In terms of scoring metrics, the lack of reference lakes with little anthropogenic impact make this step difficult, and therefore, the use of relative scores among the investigated lakes is a suitable alternative. Overall, in spite of several limitations, the development of a plant-based multivariate assessment method in Korea is possible using mostly field research data. Later, it could be improved based on qualitative metrics on plant species, and with the emergence of further survey data.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.363-368
• /
• 2003

We have successfully developed a more effective algorithm to extract the lineament in the area covered by wide alluvial deposits characterized by a relatively narrow range of brightness in the Landsat TM image, while the currently used algorithm is limited to the mountainous areas. In the new algorithm, flat areas mainly consisting of alluvial deposits were selected using the Local Enhancement from the Digital Elevation Model (DEM). The aspect values were obtained by 3${\times}$3 moving windowing of Zevenbergen & Thorno's Method, and then the slopes of the study area were determined using the aspect values. After the lineament factors in the alluvial deposits were revealed by comparing the threshold values, the first rank lineament under the alluvial deposits were extracted using the Hough transform In order to extract the final lineament, the lowest points under the alluvial deposits in a given topographic section perpendicular to the first rank lineament were determined through the spline interpolation, and then the final lineament were chosen through Hough transform using the lowest points. The algorithm developed in this study enables us to observe a clearer lineament in the areas covered by much larger alluvial deposits compared with the results extracted using the conventional existing algorithm. There exists, however, some differences between the first rank lineament, obtained using the aspect and the slope, and the final lineament. This study shows that the new algorithm more effectively extracts the lineament in the area covered with wide alluvlal deposits than in the areas of converging slope, areas with narrow alluvial deposits or valleys.