• Title/Summary/Keyword: 구조성능실험

Search Result 5,120, Processing Time 0.047 seconds

다차원 이진트리를 기반으로 하는 한글 전자사전의 성능 분석

  • 김희철;이창식
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.3 no.1
    • /
    • pp.165-174
    • /
    • 1998
  • 본 연구는 기존의 한글 전자사전의 단점들인 과다한 검색 횟수, 비효율적인 주 기억장치 사용, 이미 구축된 사전에 새로운 단어에 대한 추가·삭제의 난이성 등을 해결할 수 있는 다차원 이진트리 구조 기반의 한글 전자사전의 설계 및 구현을 그 내용으로 하고 있다. 본 논문에서 구현된 한글 전자사전의 검색시간 성능평가를 위해 입력 키워드의 종류에 따라 실험1, 실험2 의 두가지 성능평가를 수행하였다. 실험1에서는 구현된 사전의 단어를 입력 키워드로 사용하여 실험하였으며 그 결과로서 제안한 사전구조가 검색 속도 면에서 기존의 트라이 사전구조보다 약 1.5배의 성능향상을 부여주고 있음을 보았다. 실험 2는 다차원 이진트리 구조의 한글 전자사전이 트라이 구조의 한글 전자사전보다 약 2.3배의 성능향상을 이루고 있음을 보여주고 있다. 한편, 사전 구축시 필요한 주기억장치 용량에 대한 성능평가 결과는 트라이구조사전은 1.987Kbyte를 가지는 반면 제안한 다차원 이진트리 구조의 한글 전자사전은 1.136Kbyte를 가지므로 약 1.8배의 성능향상을 보여주고 있다.

다차원 이진트리 기반의 한글 전자사전 구축기법

  • 김희철;신정훈;이용두;김영순
    • Proceedings of the Korea Society for Industrial Systems Conference
    • /
    • 1998.03a
    • /
    • pp.221-227
    • /
    • 1998
  • 본 연구에서는 지금까지 한글 전자사전이 가지고 있는 과다한 검색 횟수, 비효율적인 주기억 장치 사용, 이미 구축된 사전에 새로운 단어에 대한 추가·삭제의 어려움에 대한 단점들을 개선하기 위하여 다차원 이진트리 구조의 한글 전자사전을 구현한다. 본 논문에서 구현된 한글 전자사전의 검색시간 성능평가를 위해 입력 키워드의 종류에 따라 실험1, 실험2로 나누어 성능평가를 한 결과, 실험 1에서는 구현된 사전의 단어를 입력 키워드로 사용하여 실험한 결과 제안한 사전구조가 검색 속도면에서 기존의 트라이 사전구조 보다 약 1.5배 성능향상을 보여주고 있으며 실험 2 결과도 다차원 이진트리 구조의 한글 전자사전이 트라이 구조의 한글 전자사전보다 약 2.3배의 성능향상을 보여주고 있다. 한편 사전 구축 시 필요한 주 기억 장치 용량에 대한 성능평가 결과는 트라이구조사전은 1.987Kbyte를 가지는 반면 제안한 다차원 이진트리 구조의 한글 전자사전은 1.136Kbyte를 가지므로 1.8배의 성능 향상을 보여주고 있다.

Structural Performances of an Axially-loaded Node in Single Layered Free Form Space Structures (단층 프리폼 대공간 구조물의 노드에 대한 축하중 구조성능 평가)

  • Lee, Kyoung-Ju;Oh, Jin-Tak;Hwang, Kyung-Ju;Ju, Young-Kyu;Kim, Sang-Dae
    • Journal of Korean Society of Steel Construction
    • /
    • v.24 no.1
    • /
    • pp.59-71
    • /
    • 2012
  • Results of the analysis of the structural behavior of axially loaded nodes in freeform structure were not fully understood due to certain difficulties, including the application of various welding and bolting types. In this study, a node of single layered freeform structure was tested to determine its structural behavior when subjected to axial loads. The tests were classified into node ball tests to evaluate the center of the node subjected to cyclic and monotonic loading. The node part tests were also conducted to evaluate the whole node subjected to monotonic loading. The test showed that the node ball is safe with the tensile force, but the node ball needs to increase its strength with the node loaded compressive force due to the additional bending moment of the node ball's asymmetric form.

Modeling and Simulation of a Parallel Disk System (병렬 디스크 시스템의 모델링 및 모의 실험)

  • 백승훈;김경호;박규호
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1998.10a
    • /
    • pp.33-35
    • /
    • 1998
  • 본 논문에서는 형식론적 모델링 및 모의 실험 방법을 사용하여 병렬 디스크의 성능 예측 및 영상 데이터용 비선형 편집기의 개발을 위한 여러 형태의구조에 대해서 모의 실험한 결과 및 성능에 영향을 미치는 요소들에 대해 다루고 있다. 컴퓨터가 발전하기 전에는 테이프를 이용한 선형 편집기를 사용하였으나. 컴퓨터가 발전하고 또한 입출력 장치의 성능이 향상되면서 RAID(Redundant Array of Inexpensive Disk)가 개발되었고, 이것을 이용한 비선형 편집기가 개발되었다. 병렬디스크는 비선형 편집기뿐만 아니라 VOD(Video On Demand)나 데이터 서버등 응용분야가 많고, 요구되는 성능에 따라서 다양한 구조의 병렬디스크가 사용된다. 매우 큰 대역폭이 요구되는 병렬디스크의 경우에는 다양한 버스와 버퍼를 사용한 복잡한 계층적 구조가 요구된다. 그러나 이렇게 복잡한 병렬디스크를 개발하기 에 적당한 개발 도구가 없어 필요한 성능에 꼭 맞는 시스템을 개발하기가 어렵다. 특히 디스크의 성능을 수학저으로 쉽게 구할 수 없다. 또한 시스템이 실물로 완성되기 전에는 디스크의 운영 알고리즘의 개발 및 파일 시스템의 개발이 쉽지 않다. 그래서 쉬운 소프트웨어 개발과 디스크의 성능을 쉽게 측정하기 위해서 객체 지향 성능 예측시스템(OOPPS :Objet Oriented Performance Prediction System)을 개발하였고, 이것을 이용하여 HDTV용 비선형 편집기의성능을 예측하고, 필요한 성능을 만족하는 구조를 선택하여 실물로 개발하였다.

  • PDF

Experimental Test for Seismic Performance of PCS Structural System (PCS 구조 시스템의 내진 성능 분석)

  • Park, Soon-Kyu;Yeo, In-Seok
    • Journal of the Korea Concrete Institute
    • /
    • v.19 no.3
    • /
    • pp.313-322
    • /
    • 2007
  • The PCS system, which consists of precast concrete column and steel beam, is a kind of composite structural systems. In this paper, experimental study has been conducted to analyze seismic performance of bolted beam-to-column connections for the PCS system. Based on experimental results from the seismic testing of eight interior PCS specimens, it shows that behavior of PCS system is satisfactory to seismic performance criteria of ACI such as strength deterioration, stiffness degradation and energy dissipation capacity except initial stiffness. All of the specimens maintain their strength at large levels of story drift without significant loss of stiffness and show high ductility level for inelastic behavior. The energy dissipation capacity is two times greater than requirement of ACI criterion. But the initial stiffness of all specimens does not satisfy ACI criterion, and this phenomenon is similar to the other composite structural systems such as RCS, CFT system.

An Experimental Study on the Fire Behavior of Two-way Void Slab under Standard Fire with Loading condition (표준화재 재하조건 이방향 중공슬래브의 화재거동에 관한 실험적 연구)

  • Kim, Hyung-Jun;Yeo, In-Hwan;Kim, Heung-Youl;Cho, Kyung-Suk;Kim, Jeong-Hyun
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2010.10a
    • /
    • pp.17-20
    • /
    • 2010
  • 기존의 무량판 구조와 동일한 이방향 슬래브구조인 TVS(two-way void slab)공법은 구조적 하중지지 성능이 불필요한 슬래브 단면상의 중앙부 콘크리트를 제거하여 슬래브의 자중을 줄이고 무량판 구조의 단점을 보완하여 장점을 극대화시킨 구조형식이다. 그러나 이러한 장점을 보유한 공법을 현장적용하기 위해서는 내화성능평가를 통해 화재안전성을 확보하여야 하므로, 이에 대한 화재 실증실험을 수행하여 현장적용을 위한 최소 요구내화 시간에 따른 내화성능 확보방안의 도출이 제시되어야 한다. 이에 본 연구에서는 TVS공법의 실제 스팬길이로 슬래브 피복두께에 따른 화재거동 영향성 분석을 위하여 화재실험을 수행하였다. 하중조건은 고정하중과 적재하중을 고려하여 실험체에 등분포 조건으로 사전재하하였으며, 표준화재조건으로 재하가열 실험을 수행하였다. 슬래브의 화재가열 노출면으로부터의 깊이별 온도변화와 처짐변형 특성을 측정하였으며, KS F 2257-1 평가기준에 의거하여 슬래브의 내화성능을 평가하였다. 실험결과 피복두께 50 mm를 확보할 경우, EPS중공체로 제작한 실험체의 경우 약 2시간정도의 내화성능을 확보할 수 있는 것으로 나타났다.

  • PDF

Experimental Techniques for Evaluating Seismic Performance of Base-Isolated Structure (기초격리된 구조물의 내진성능평가를 위한 실험기법)

  • 윤정방;정우정;김남식;김두훈
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.1 no.4
    • /
    • pp.45-58
    • /
    • 1997
  • This paper describes a series of shaking table and pseudodynamic tests for evaluation of seismic performance of base-isolated structures subjected to various seismic earthquake inputs. The main objectives of this study are : (1) evaluation of the effectiveness of base-isolation systems for low-rise structures against severe seismic loads through shaking table tests, (2) verification of the substructuring pseudodynamic test method for the base-isolated structures in comparison with the shaking table test results. In the shaking table test, a quarter scaled three-story structure base-isolated by laminated rubber bearings is tested. In the pseudodynamic test, only the laminated rubber bearing s are tested using the substructuring technique, while the concurrent seismic responses of the superstructure are computed using on-line numerical integration. Comparison with the shaking table test results indicates that the substructuring pseudodynamic test method is very effective for determining the dynamic responses of the base-isolated structure.

  • PDF

Experimental study on the Flexural Capacity of U-shape Composite Beam (U-형 복합보의 휨 성능에 관한 실험적 연구)

  • Ha, Sang-Su
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.23 no.3
    • /
    • pp.143-149
    • /
    • 2019
  • In this study, a U-shape composite beam was developed to be effectively used for a steel parking lot which is 8m or lower in height. When the U-shape composite beam was applied to a steel parking lot, essential considerations were story-height and long-span. In addition, due to the mixed structural system with reinforced concrete and steel material, the U-shape composite beam needed to have a structural integrity and reliable performance over demand capacity. The main objective of this study was to investigate the performance of the structure consisting of the reinforced concrete (RC) slab and U-shape beam. A U-shape composite beam generally used at a parking lot served as a control specimen. Four specimens were tested under four-point bending. To calculate theoretical values, strain gauges were attached to rebar, steel plate, and concrete surface in the middle of the specimens. As the results, initial yielding strength of the control specimen occurred at the bottom of the U-shaped steel. After yielding, the specimen reached the maximum strength and the RC slab concrete was finally failed by concrete crush due to compressive stress. The structural performance such as flexural strength and ductility of the specimen with the increased beam depth was significantly improved in comparison with the control specimen. Furthermore, the design of the U-shape composite beam with the consideration of flexural strength and ductility was effective since the structural performance by a negative loading was relatively decreased but the ductile behavior was evidently improved.

An Experimental study on the Structural Performance by the Depth Variation of Capacity of U-shaped composite Beam (U-형 복합보의 춤 변화에 따른 구조성능에 관한 실험적 연구)

  • Ha, Sang-Su
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.24 no.5
    • /
    • pp.111-118
    • /
    • 2020
  • The U-shaped composite beam used in this study consist of a reinforced concrete structure, a beam steel structure supporting the slab, a reinforced concrete structure, and a U-shaped steel plate. The U-shaped composite beam was developed for the purpose of using it as a parking lot because it is highly constructible and has low floor height and long span. For the improvement of constructivity, the U-shaped composite beam ends are planned with standardized H-shaped steel and connected directly to the columns, and the middle of the U-shaped composite beam consists of U-shaped steel plates folded in U-shaped form using thin steel plates (t=6) instead of H-shaped steel. In the middle of the composite beam, where U-shaped steel plates are located, the depth of U-shaped beam may be planned to be small so as to satisfy the height limit of the parking lot. It is important to grasp the structural performance according to the change of depth because low beam depth is advantageous for the reduction of the floor height, but it is a inhibitor to the structural behaviors of U-shaped composite beam. In addition, since U-shaped composite beams are a mixture of steel frame structures, reinforced concrete structures and U-shaped steel plates, securing unity has a great influence on securing structural performance. Therefore, in this study, a structural experiment was conducted to understand the structural performance according to the depth change for U-shaped composite beam. A total of three specimens were planned, including two specimens that changed the depth using a criteria specimen planned for a general parking lot. The results of the experiment showed that the specimens who planned the depth greatly had better structural performance such as yield strength, maximum strength, and energy than the standard specimen.

다양한 분포의 데이터를 이용한 시계열 패턴 인덱스의 성능 비교

  • 김영인
    • Proceedings of the Korea Society for Industrial Systems Conference
    • /
    • 1998.10a
    • /
    • pp.791-805
    • /
    • 1998
  • 음성데이타베이스 이미지 데이터베이스 등과 같은 응용에서 다차원 구조의 시계열 패턴을 효율적으로 처리하기 위한 인덱스 구조가 필요하다. 이러한 인덱스구조로 시계열 패턴 인덱스(9)가 제안되었다. 본 논문에서는 시계열 패턴 인덱스가 실제 응용에 적용가능한가를 판단하기 위하여 , 다양한 분포의 대량 데이터를 이용한 실험을 통한 성능을 비교한다. 성능 실험결과 저장시의 성능은 균일 분포에서 좋은 성능을 나타냈다. 질의 처리시의 성능은 모든 분포에서 좋은 후보 선택의 결과를 나타냈다.