• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.171-178
• /
• 2007

This study was conducted to investigate the effect of ageing temperature(0 and $4^{\circ}C$) and time(2, 7, 14, 21, 28, and 49 days) on the meat quality of longissimus muscle from Hanwoo steer. The pH, Warner-Bratzler shear force(WBSF), myofibrillar fragmentation index(MFI), cooking and purge loss, sensory, morphological changes, and amino acid composition were assessed. The pH of longissimus muscle increased significantly(p<0.05) for 21 days at $0^{\circ}C$ and 14 days at $4^{\circ}C$, but decreased thereafter. Longissimus muscle aged from 14 days to 28 days at $4^{\circ}C$ had a lower WBSF than longissimus muscle aged at $0^{\circ}C$(p<0.05). The WBSF of longissimus muscle decreased significantly(p<0.05) with ageing time. The MFI, cooking and purge loss, tenderness, and juiciness scores were higher for longissimus muscle aged at $4^{\circ}C$ than at $0^{\circ}C$. As ageing time increased, the MFI, cooking and purge loss, tenderness, juiciness, and amino acid composition of longissimus muscle increased significantly(p<0.05) with ageing at 0 or $4^{\circ}C$. Transmission electron microscopy showed Z-disk degradation and morphological changes of the myofibrils correlating with increased tenderness during the ageing time. Based on these results, the proper ageing conditions of longissimus muscle of Hanwoo steer were 14 days of ageing at $0^{\circ}C$ or 7 days of ageing at $4^{\circ}C$. However, further study on the application of ageing technology to this industry is necessary for the optimization of ageing conditions for the sub-primals or muscles from Hanwoo beef.

• Korean Journal of Ichthyology
• /
• v.22 no.3
• /
• pp.168-178
• /
• 2010

Fish assemblages associated with rock reef and non-rock reef were studied using specimens collected at three sites in Geomun Island waters of the Southern Sea, Korea, in February, May, August and October, 2006. Two survey methods for the study were followed: collection by a gill net, and video observation by scuba diving. The gill-net survey was conducted during the night, the scuba-diving observations were conducted during the day. From the gill-net survey, a total of 40 species, 380 inds. and 71,426.9 g was caught at the three sites. The dominant species was Trachurus japonicus; other species were Raja kenojei, Dasyatis akajei, Stephanolepis cirrhifer, Narke japonica, Pagrus major, Sebastes inermis, and Sphyraena pinguis. At the rock-reef site, a total of 26 species, 264 inds. and 46,776.7 g was caught by gill net, and the dominant species was T. japonicus. A total of 17 species, 45 inds., 10,535.1 g was caught at the flat-bottom 1 site, and 19 species, 71 inds. and 14,115.1 g were caught at the flat-bottom 2 site. The scuba-diving survey resulted in 13 species and 1,749 inds. observed at the three sites through the survey period. The main observed fishes were rock-dwelling species such as Chromis notatus, Microcanthus strigatus, S. cirrhifer, Ditrema temmincki, Evistias acutriostris, Girella punctata, Halichoeres poecilopterus, Hexagrammos agrammus, Prionurus scalprum, Sebastes inermis, and Semicossyphus reticulatus. Seven species and 1,739 inds. observed at the rock-reef site comprised 99.4% of the inds. of the three sites. Therefore, the fish community in Geomun Island waters included many rock-reef. species, but a few were migratory species like T. japonicus and Scomber japonicus. The abundance of fish at the rock-reef site was high in comparison with those at two non-rock reefs. The dominant species were very different between the day and the night, although rock-reef species comprised the main part of the fish community. We conclude that the high abundance of fish in Geomun Island waters is most closely related to physical structure, such as rock reefs, which is the main habitat of many fishes.

• Journal of agricultural medicine and community health
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2003

Objectives: This paper introduces need and supply level of rural mental health care service and especially focuses on the evaluation for the community mental health programs of Public Health Centers(PHCs) in rural areas as the facilities for primary mental health care. Methods: We defined the need as prevalance rate and service utilization rate, for which reviewed the results of the epidemiological study of mental disorders using Korean Composite International Diagnostic Interview surveyed on a nationwide scale in 2001. Supply was appraised in terms of psychiatric beds and primary mental heath care facilities such as private psychiatric clinics, facilities for social rehabilitation, PHCs running community mental health programs. For this, we reveiwed a variety of annual reports related mental health published by Ministry of Health and Welfare. To evaluate the community mental health programs of PHCs in rural areas, we selected. randomly samples out of the 3rd community health plans including the contents of community mental health programs, which submitted by 89 rural counties and 44 cities mixed with rural areas, and used the program's guideline established by central government as a standard. Results: Prevalence rates of major psychiatric diseases such as schizophrenia, alcoholism, major depression, anxiety disorder were higher in rural area than in urban area and 8.9% of psychiatric patients in both areas stayed at homes contacted with mental health manpower more than one time during the last year. Psychiatric beds were sufficiently supplied, but urban area had less beds than rural area contrary to general health care service. Psychiatric clinics were supplied very insufficiently in rural areas and PHCs bridged the gap instead. However rural PHCs got less financial support for community mental health programs from higher positioned agencies than urban PHCs. Rural community health programs not supported hardly worked out. Conclusions: Central government should consider a special policy for rural primary mental health care, because private psychiatric clinics can't be introduced in rural areas due to demand-deficiency and the financial independence of rural counties was very vulnerable.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.3-30
• /
• 1991

This paper examines Korea's exports of manufactures to the United States, Japan, and other OECD member countries in the 1974-89 period, focusing on the market share in the trade partners' imports. It decomposes the growth of exports into various effects, following the "constant-market-shares" analysis. For this purpose, the entire period is divided into three subperiods: 1974-78, 1978-83, and 1983-89. The paper also estimates a regression model of the market share determination, using the data of Korea's market share in U.S. imports. In the three subperiods under study, Korea's exports grew at different paces for varied reasons. The average annual growth rate was 28 %, 11 %, and 21 %, respectively. A large drop in the "competitiveness effect", that is, in the market-share growth rate, was mainly responsible for the decline in the export growth rate. The largest drop in the competitiveness effect was found in the light manufactures exports in the second period. The market share did not regain the rapid growth momentum. The main reason for the rise in export growth rate in the last subperiod was the "market-size effect"-a rise in the growth rate of the trade partners' imports. According to the regression results, high intensities in physical and human capital tended to lower the Korean manufacturing industries' market shares in the United States. This negative correlation was stronger in the case of human capital intensity, suggesting that Korea is relatively poorer in human capital endowment than in physical capital endowment when compared to the United States. This negative correlation between the market share and each of the two intensities became weaker overtime. This may be interpreted as the consequence of both physical and human capital accumulation which were faster than the labor force growth. Depreciation of the Japanese yen was estimated to have a negative influence on the Korean manufacturing industries' market share in the United States, and this negative influence became stronger each year in the 1980s. This seems to reflect the intensifying competition between the two countries' exports in U.S. import markets. The Heavy and Chemical Industry Policy of the 1970s, which promoted a number of selected industries by providing them with various incentives and inevitably discriminated against the rest of the industries, was estimated to have had strong negative effects on the export performance of the light manufacturing industries. This finding and the largest decline in the "competitiveness effect" -found in the light manufactures exports in the 1978-83 period-indicate that the Heavy and Chemical Industry Policy was mainly accountable for the drop in the export growth rate during the period. On the other hand, the rise in export growth rate during the subsequent subperiod was greatly impacted by the large scale exchange rate realignments of major currencies, especially by the appreciation of the Japanese yen, and other changes in international economic conditions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.93-102
• /
• 2016

Purpose: The aim of this study was to evaluate the fit accuracy of two zirconia and titanium abutments in internal hexagonal implants. Materials and methods: One titanium abutment and two zirconia abutments were tested in internal hexagonal implants (TSV, Zimmer). Prefabricated zirconia abutments (ZirAce, Acucera) and customized zirconia abutments milled by the Zirkonzahn system (Zirkonzahn Max, Zirkonzahn) were selected and prefabricated titanium abutments (Hex-Lock, Zimmer) were used as a control. Eight abutments per group were connected to implants with 30 Ncm torque. The marginal gaps at abutment-implant interface, the internal gaps at internal hex, vertical and horizontal gaps between screws and screw seats in abutments were measured after sectioning the embedded specimens using a scanning electron microscope. Data analysis included one-way analysis of variance and the Scheffe test (n=16, ${\alpha}=0.05$). Results: The mean marginal gap of customized zirconia abutment was higher than those of two prefabricated zirconia and titanium abutments. The internal gaps at internal hex showed no significant differences between customized and prefabricated abutments and were higher than those of prefabricated titanium abutments. The mean vertical and horizontal gaps at screw in prefabricated zirconia abutment were higher than those of prefabricated titanium abutment. In the case of customized zirconia abutment, the mean horizontal gap at screw was higher than those of both the prefabricated zirconia and the titanium abutment but the mean vertical gap was not even measureable. The screw seats were clearly formed but did not match with abutment screws in prefabricated zirconia abutments. They were not, however, precisely formed in the case of customized zirconia abutments. Conclusion: Within the limitations of this study, the prefabricated titanium abutments showed better fit than the zirconia abutments, regardless of customized or prefabricated. Also, the customized zirconia abutments showed significantly higher marginal gaps and the fit was less accurate between screws and screw seats than the prefabricated abutments, titanium and zirconia.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.733-739
• /
• 2009

This study was carried out to analyze the relationship between major climatic factors (monthly temperature, precipitation) and radial growth of Korean Pine (Pinus koraiensis) in Inje-gun(Mt. Seorak), Sanchung-gun and Namwon-si(Mt. Jiri). Radial growth measurements were crossdated and correlated with climate variables. The climatic factors used were monthly mean temperature and monthly precipitation from August of previous year to September of the current year. In Inje-gun, radial growth was negatively correlated with monthly mean temperature in April, May, June, and August of the current year and was positively correlated with precipitation in August, October of the previous year and in April, August of the current year. Sanchung-gun showed a negative correlation with monthly mean temperature in September of the previous year and August of the current year but positive correlation in January of the current year. In contrast, precipitation in September of the previous year and August of the current year showed a positive influence. The results suggest that high temperature together with low precipitation may thus cause water stress and thereby limit radial growth in this region. In Namwon-si, the climategrowth relationships show that radial growth was negatively correlated with monthly mean temperature in August, October of the previous year and June of the current year. But August of the previous year and May, August of the current year in precipitation was positively correlated with radial growth. In the study areas, precipitation plays an important role for the radial growth of Kroean Pine (Pinus koraiensis). The results suggest that precipitation is important in the radial growth because water deficit in trees would take place in response to high temperature in the study area. Also there was some differences with study areas in the effects of both climatic variables probably as a result of different stand structure and geographical conditions and micro-climate.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.138-145
• /
• 2013

In order to develop the efficient control algorithm of the two-fluid fogging system, cooling experiments for the many different types of fogging cycles were conducted in tomato greenhouses. It showed that the cooling effect was 1.2 to $4.0^{\circ}C$ and the cooling efficiency was 8.2 to 32.9% on average. The cooling efficiency with fogging interval was highest in the case of the fogging cycle of 90 seconds. The cooling efficiency showed a tendency to increase as the fogging time increased and the stopping time decreased. As the spray rate of fog in the two-fluid fogging system increased, there was a tendency for the cooling efficiency to improve. However, as the inside air approaches its saturation level, even though the spray rate of fog increases, it does not lead to further evaporation. Thus, it can be inferred that increasing the spray rate of fog before the inside air reaches the saturation level could make higher the cooling efficiency. As cooling efficiency increases, the saturation deficit of inside air decreased and the difference between absolute humidity of inside and outside air increased. The more fog evaporated, the difference between absolute humidity of inside and outside air tended to increase and as the result, the discharge of vapor due to ventilation occurs more easily, which again lead to an increase in the evaporation rate and ultimately increase in the cooling efficiency. Regression analysis result on the saturation deficit of inside air showed that the fogging time needed to change of saturation deficit of $10g{\cdot}kg^{-1}$ was 120 seconds and stopping time was 60 seconds. But in order to decrease the amplitude of temperature and to increase the cooling efficiency, the fluctuation range of saturation deficit was set to $5g{\cdot}kg^{-1}$ and we decided that the fogging-stopping time of 60-30 seconds was more appropriate. Control types of two-fluid fogging systems were classified as computer control or simple control, and their control algorithms were derived. We recommend that if the two-fluid fogging system is controlled by manipulating only the set point of temperature, humidity, and on-off time, it would be best to set up the on-off time at 60-30 seconds in time control, the lower limit of air temperature at 30 to $32^{\circ}C$ and the upper limit of relative humidity at 85 to 90%.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1285-1297
• /
• 2020

In this study, we report the results of a study on the clinical evaluation of wrinkle improvement by developing a method for liposome of high-purity Centella asiatica extract used in pharmaceuticals and cosmetics, and a cream using the same. In order to make Centellasome-10EX stabilizing centella asiatica extract in liposome lamella vesicle, it could be completed using 5% hydrogenated lecithin and 2% sucrose distearate. The appearance of Centellasome-10EX was a creamy form of low viscosity, the color was pale yellow, and the odor had the inherent odor of the raw material. The pH was about 6.12, the specific gravity was 1.09, and the acid value was about 0.35. The content of the main constituents of centella asiatica extract contained in the liposome vesicle contains 10,800 ppm of asiatic acid, 10,900 ppm of asiaticoside, 6,000 ppm of madecasic acid, and 1,600 ppm of madecassoside, and long-term storage. There was no discoloration even at the time, and it was found that the main component remained stable thermodynamically. To mechanistically analyze the structure of the liposome vesicle of Centellasome-10EX, as a result of observation with a transmission electron microscope (Cryo-TEM), the multilayer vesicles are formed and filled with moisture, and there are 10 to 60 multilayers around it. It was confirmed that the liposome lamella vesicle was formed. As a clinical trial (in-vivo) test, the moisturizing effect of centellasome cream after application for 5 weeks was 28.3%, which was significantly increased compared to placebo. The skin elasticity effect was 13.6%, which significantly increased the moisturizing power than the placebo. The effect of improving fine wrinkles around the eyes was improved by 23.52% compared to placebo cream. Through the results of this study, it was possible to study the formulation and manufacturing method for encapsulation and stabilization of the developed Centellasome-10EX in the liposome vesicle. It is expected that the results obtained through clinical research on the wrinkle improvement effect of the cream using this can be widely used to study skin science in the cosmetic industry and to develop high-quality cosmetics with high efficacy.

• Journal of Distribution Research
• /
• v.15 no.1
• /
• pp.73-101
• /
• 2010

Using data collected from franchisees from Busan, we empirically examined the relationship both structural (tie strength), relational (trust), and cognitive (shared value) of social capital and between those dimensions and the patterns of economic performance and noneconomic performance (relationship continuity intention). So we established 9 hypotheses to test the structural relationship among dimensions of social capital and performances like below. H1: A franchisee's perceived tie strength with its franchisor will positively influence its trust in the franchisor. H2: A franchisee's perceived shared value with its franchisor will positively influence its trust in the franchisor. H3: A franchisee's perceived tie strength with its franchisor will positively influence its economic performance. H4: A franchisee's perceived shared value with its franchisor will positively influence its economic performance. H5: A franchisee's perceived trust in its franchisor will positively influence its economic performance. H6: A franchisee's perceived tie strength with its franchisor will positively influence its relationship continuity intention with the franchisor. H7: A franchisee's perceived shared value with its franchisor will positively influence its relationship continuity intention with the franchisor. H8: A franchisee's perceived trust in its franchisor will positively influence its relationship continuity intention with the franchisor. H9: A franchisee's perceived economic performance will positively influence its relationship continuity intention with the franchisor. The conceptual model specifying the relationship among dimensions of social capital and performances is presented in Fig. 1. Tests of the hypotheses were performed using a structural equation model. This model also reflected a good fit to the data ($\chi^2$=101.12 df=62 p=0.004, RMSEA=0.050 GFI=0.936 AGFI=0.895 NFI=0.959 CFI=0.986). The standardized solution estimated by the AMOS 7 program was for interpreting the structural results (Table 1). As was expected, tie strength and shared value were founded to be significant predictors of trust (H1 supported; H2 supported). Tie strength and trust have a significant positive effect on economic performance (H3 supported; H5 supported). But shared value have not a significant effect on economic performance (H4 Rejected). Tie strength were not associated with relationship continuity intention (H6 Rejected). While on the other higher shared value, trust, and economic performance have a significant effect on the relationship continuity intention (H7 supported; H8 supported; H9 supported). The results show integratedly that, first, tie strength does not affect directly but affects indirectly on relationship continuity intention via trust and economic performance. Second, shared goals affect directly and do indirectly via trust on relationship continuity intention. But shared goals does not affect via economic performance on relationship continuity intention. Finally, the study suggests important implications for both research and practice for franchise system especially.