• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2005

This paper presents moment-curvature analytical method of concrete filled steel tubular members considering intensity increase phenomenon by triaxial compression stress generation. For this purpose, this study considers buckling characteristics about compression department of steel members that filled up light weight and normal concrete. The analytical results are compared with the test results. Even if beam that filled up light weight concrete was calculated moment-curvature relationship easily analytically and could know that analytical results estimates as well agreed with the test results in case filled up normal concrete. In addition, the efficiency and applicabilities of the proposed moment curvature relationship algorithm are verified through conventional experimental results.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.67.2-67.2
• /
• 2011

은하단에 속한 은하들의 광도함수에 의하면, 어두운 은하들(MB>-18,확인요망)의 수가 이 론적 예측에 비해 현저하게 적게 관측된다. 우리는 이와 같은 "어두운 은하들의 결핍 현상"을 설명하기위해 은하단 간의 충돌/병합과 같은 역학적 기원론을 제시하고자 한다. 본 연구는 은하단 간의 충돌/병합 과정에서 비교적 작은 질량의 은하들이 은하단의 중력적 구속에서 벗어날 가능성이 높다는 점에 착안하였다. 이러한 가능성을 검증하기 위해 (ㄱ) 우주론적 다. 체수치모사의 방법을 활용하고, (ㄴ) 유체수치모사에서 도입하여 발전시킨 "어떤 주어진 입자로부터 N번째 떨어진 입자의 거리 분석(N-th Particle)"이라는 새로운 방법으로 다체입자들의 공간분포 해석을 시도하였다. 이러한 방대한 자료를 효과적으로 분석하기 위해, GPU(Graphic Processing Unit)를 기반으로 설계된 분석 알고리즘을 독자 개발하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.76-77
• /
• 2011

본 논문에서는 새로운 케이블 교량 형식인 사장-현수 복합케이블 교량 형식에 대한 초기평형상태 해석방법을 제시한다. 구체적으로 복합케이블 교량의 해석방법으로 다음과 같은 두 가지 방법을 제안한다. 우선 사장교의 초기평형상태 해석에서 사용된 전체 구조물을 하나의 구조물로 생각하여 해석하는 일괄방식 해석방법을 제안한다. 이 방법을 적용하는 과정에서 행어부문의 거동이 기존의 가정에 위배되는 문제점이 발견되었는데, 이러한 문제점은 변위복원방식의 successive iteration 을 적용하여 해결하였다. 다음으로 현수교의 초기평형상태 해석에서 사용된 전체 구조물을 현수교 부문과 사장교 부문 그리고 행어 부문의 3가지 부문으로 분리하여 해석하는 분리방식 해석방법을 제안한다. 이 방법을 적용하는 과정에서는 위의 일괄방식 해석방법에서 나타난 행어의 거동이 기존의 가정에 위배되는 현상과 더불어, 분리된 각 부문의 평형 조건과 적합조건이 일치하지 않는다는 문제점이 발생하였다. 이러한 추가의 문제점은 타워 최상단부의 수평변위를 적절히 구속시키고 각 부문 해석의 초기값을 조절하여 해결하였다. 마지막으로 제안된 두 가지 방법을 Deck에 캠버가 있는 적절한 예제를 통해서 검증하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.619-627
• /
• 1999

다분야 통합 시스템의 설계문제는 다량의 설계변수와 구속조건으로 구성되며 다수의 공학적 현상으로 연관되어 있다. 다분야 통합 최적설계 문제를 효과적으로 다루기 위해서는 다양한 해석분야의 공학적 설계원리를 동시에 고려하여 균형 있고 유기적인 방법으로 최적의 설계를 결정하는 체계적인 설계자동화기술이 요구된다. 다분야 통합 설계문제를 위한 효율적인 설계방법론으로 분리기반 최적화 기법이 적용되는데 이 방법은 한 단위의 대규모 설계문제를 여러 개의 하부시스템으로 분리하여 독립적으로 최적화를 수행하고 각 하부 시스템으로부터의 설계해 사이의 중재 및 통합화를 거쳐 최종적으로 수렴된 최적설계를 찾는 방법이다. 본 논문에서는 분리기반 최적화기법을 다분야 통합최적 설계문제에 적용하는데 필요한 시스템분리기법을 유전알고리즘 및 다층 역전 파 신경회로망을 이용하여 정립하였다. 시스템분리기법을 검증하기 위해 최근 미국 Boeing사에서 개발중인 고속 민간항공기인 HSCT의 시뮬레이션기반 설계문제를 이용하였다. 대규모 설계시스템의 분리결과는 전체 설계문제의 특성을 파악하기 위한 자료로 활용되며 향후, 분리기반 최적화과정에서 최종적으로 통합된 최적설계를 탐색하는데 필요한 기반구조를 제공한다.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.179-188
• /
• 1997

A 4-node element for efficient finite element analysis of plate bending is presented in this paper. This element is formulated based on Mindlin plate theory to take account of shear deformation. To overcome the overestimation of shear stiffness in thin Mindlin plate element, especially in the lower order element, five nonconforming displacement modes are added to the original displacement fields. The proposed nonconforming element does not possess spurious zero-energy mode and does not show shear locking phenomena in very thin plate even for distorted mesh shapes. It was recognized from benchmark numerical tests that the displacement converges to the analytical solutions rapidly and the stress distributions are very smooth. The element also provides good results for the case of high aspect ratio.

• Journal of Power System Engineering
• /
• v.2 no.1
• /
• pp.80-85
• /
• 1998

Engineering plastics have been magnified its usability due to its outstanding mechanic al, electrical and chemical properties, for example, in the area of computer, electricity, electronics, automobile, camera industry. In recent, automobile speedometer system is changing from manual operation to motor operation. All plastic gears inserted by metal shaft are used In motor operated speedometer system. Therefore, in this research, experimental investigation of the shrinkage phenomenon was executed according to various inserted depth and injection conditions. In experiments, the inserted depth was controlled as 30% and 90% of the total thickness of the plastic gear. The main parameters of injection process were selected as injection pressure, holding pressure, melt temperature, injection rate. As main results, free shrinkage rate of the test part is increased about 4 times to restricted shrinkage rate and shrinkage phenomenon against all injection conditions have a trivial effect on the test parts as conventional parts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.181-194
• /
• 2013

Landslides are known as gravitational mass movements that can carry the flow materials ranging in size from clay to boulders. The various types of landslides are differentiated by rate and depositional features. Indeed, flow characteristics are observed from very slow-moving landslides (e.g., mud slide and mud flow) to very fast-moving landslides (e.g., debris avalanches and debris flows). From a geomechanical point of view, shear-rate-dependent shear strength should be examined in landslides. This paper presents the design of advanced ring-shear apparatus to measure the undrained shear strength of debris flow materials in Korea. As updated from conventional ring-shear apparatus, this apparatus can evaluate the shear strength under different conditions of saturation, drainage and consolidation. We also briefly discussed on the ring shear apparatus for enforcing sealing and rotation control. For the materials with sands and gravels, an undrained ring-shear test was carried out simulating the undrained loading process that takes place in the pre-existing slip surface. We have observed typical evolution of shear strength that found in the literature. This paper presents the research background and expected results from the ring-shear apparatus. At high shear speed, a temporary liquefaction and grain-crushing occurred in the sliding zone may take an important role in the long-runout landslide motion. Strength in rheology can be also determined in post-failure dynamics using ring-shear apparatus and be utilized in debris flow mobility.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.272-277
• /
• 2001

A spin valve structure of Ta/NiFe/CoFe/Cu/CoFe/Ru/CoFe/FeMn/Ta which has a synthetic antiferromagnet (CoFe/Ru/CoFe), was fabricated by using a magnetron sputtering system. The thickness and composition of magnetic free and pinned layers affect the magnetic properties such as exchange interaction strength of each layer and so on. Even though Rutherford Backscattering Spectrometry (RBS) has advantages of quantitative and non-destructive analysis, it is almost impossible to determine the thickness and composition of magnetic thin films using lBS because of its poor mass resolution for a higher atom number (Z>20). In this study, quantitative analysis of the element composition and thickness for the spin valve sample was performed by combining both Proton Induced X-ray Emission Spectrometry (PIXE), which is one of element specific analysis techniques, and grazing-exit RBS with a highly improved depth resolution and absolute quantitative analysis. For the quantitative analysis, standardization of PIXE was carried out with NiFe, CoFe, and FeMn layers, which are one of constituent layers of spin valve films. Through PIXE standardization and the aid of PHE experimental results of the spin valve sample, ire overlapped signal in a grazing-exit RBS spectrum were successfully resolved and the thickness of the Ru layer was determined with a resolution of ∼1 .

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.107-116
• /
• 2011

Rigid soil containers (or rigid boxes) are often used for 1g shaking table tests. The rigid boxes, however, do not accurately simulate the amplification of ground acceleration and phase difference of seismic motion in the model ground due to the confinement of shear deformation and the reflection of seismic wave at the box walls. Laminar soil containers (or laminar shear boxes) can simulate the free field motion at convincingly superior accuracy than the rigid ones. In this study, the soft ground is modeled for both types of boxes and is subjected to seismic loading using a 1g shaking table. The comparison of the results using the two types of soil containers illustrates that, in case of the rigid box, the ground acceleration shows non uniform distribution and the phase synchronization of input motion. Whereas, the dynamic behavior of the laminar shear box shows good agreement with the free field behaviors such as the amplification of ground acceleration and the occurrence of phase difference.

• Tunnel and Underground Space
• /
• v.31 no.1
• /
• pp.41-51
• /
• 2021

The hydraulic fracturing developed to improve permeability of tight reservoir is one of key stimulation technologies for developing unconventional resources such as shale gas and deep geothermal energy. The experimental study was conducted to improve disadvantage of hydraulic fracturing which has simple fracture pattern and poor fracturing efficiency. The fracturing experiments was conducted for tight rock using various fracturing fluids, water, N2, and CO2 and the created fracture pattern and fracturing efficiency was analyzed depending on fracturing fluids. The borehole pressure increased rapidly and then made fractures for hydraulic fracturing with constant injection rate, however, gas fracturing shows slowly increased pressure and less fracture pressure. The 3D tomography technic was used to generate images of induced fracture using hydraulic and gas fracturing. The stimulated reservoir volume (SRV) was estimated increment of 5.71% (water), 12.72% (N2), and 43.82% (CO2) respectively compared to initial pore volume. In addition, permeability measurement was carried out before and after fracturing experiments and the enhanced permeability by gas fracturing showed higher than hydraulic fracturing. The fracture conductivity was measured by increasing confining stress to consider newly creating fracture and closing induced fracture right after fracturing. When the confining stress was increased from 2MPa to 10MPa, the initial permeability was decreased by 89% (N2) and 50% (CO2) respectively. This study shows that the gas fracturing makes more permeability enhancement and less reduction of induced fracture conductivity than hydraulic fracturing.