• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.151-158
• /
• 2018

The intervertebral foramen is formed by two adjacent vertebrae and an intervertebral disc. Previous studies examining the foramen have been performed using various methods. The author obtained characteristics of the intervertebral foramen based on silicon mold. The author used 18 cadavers and dissected the lumbar intervertebral foramen. First, positional levels of the spinal nerve in the intervertebral foramen were measured. Second, after being removed all tissues covering the intervertebral, bony foramen was filled with melted silicon to mold the cross section. Subsequently, the solidified silicon mold was removed and stamped on a paper. The paper was scanned and analyzed area, perimeter, height and width of the intervertebral foramen on a computer. Area (average, $9.43mm^2$) and perimeter (average, 48.02 mm) did not show any statistical significant pattern for any lumbar vertebral levels. However, the height and width significantly differed at the fifth lumbar vertebra, which had the shortest height (the fifth, 13.00 mm; average, 15.78 mm) and longest width (the fifth, 8.61 mm; average, 7.87 mm), although there were similar patterns in case of area and perimeter of the first to fourth lumbar vertebra. Height had a decrease tendency while width had an increase tendency both from the second to fifth lumbar vertebra. Spinal nerves went through near the intervertebral disc level from the first to fourth lumbar vertebra, although they passed below the disc at the fifth level. This study provides a different view of methodology for the 3-dimensional aspect for the intervertebral foramen. Results of this study may indicate that height and width of the intervertebral foramen changed along all lumbar vertebral levels; nevertheless, area and perimeter of the intervertebral foramen remained constant.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.39-45
• /
• 2008

본 연구는 두 개의 경사진 다공 배플이 설치된 사각채널에서 국부 열전달향상 특성을 조사하였다. 채널은 19.8cm(W)$\times$4cm(H)의 단면적을 가지며 형상계수는 4.95이며 수력직경은 6.66cm이다. 4종류의 배플을 취급하였다. 가열 시험부에 동일한 크기, 경사각, 구멍형태의 경사 배플을 설치하였다. 경사 배플은 모두 19.8 cm의 폭, $2.55cm\times2.55cm$의 정 다이아몬드 형 구멍, 그리고 So의 경사각을 갖는다. 레이놀즈 수 범위는 23,000에서 57,000까지이다. 배플의 구멍의 수가 열전달 향상에 중요한 역할을 하였으며 구멍이 3개 인(baffle type II)가 가장 우수한 열전달 향상을 보였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.94-95
• /
• 2000

파장보다 작은 구멍을 통한 빛의 회절을 다루는 문제는, 최근 근접장 광학의 발달과 더불어서 많은 연구가 되고 있다. 이러한 작은 구멍은 근접장 주사 광학 현미경(NSOM)에서의 탐침(probe)으로 사용되므로, 여기에서 일어나는 빛과 탐침의 상호작용을 잘 이해하는 것이 중요하다.$^{(1)}$ 본 연구에서는 작은 구멍 주변에 선형 스크래치가 있을 때, 구멍을 통한 빛의 회절 분포를 먼 장(far field) 영역에서 관측하였다. 먼 장 분포를 분석해 본 결과, 구멍 주변의 선형 스크래치에 의한 효과가 나타나는 것을 볼 수 있었다. 이것은 구멍 주변에서 발생한 표면파가 금속 표면을 따라가면서, 주변의 스크래치와 상호 작용한 결과로 보인다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.71-74
• /
• 1996

절삭가공 중에서 구멍가공은 최근 광범위하게 이루어지는 작업의하나이다. 현재 대부분의 구멍가공은 두개의 절삭날을 갖는 Twist Drill에 의해 이루어지고 있다. 이 두개의 절삭날 드릴은 작업능률이 다른 절삭 공구에 비교하여 낮고, 그 가공정도도 충분하지 않다. 본 연구에서는 초경 세개의 절삭날 드릴을 사용하여 구멍가공 실험을 하고, 그 절삭성능과 관련하여가공 구멍의 형상을 측정함에 따라 가공구멍 중심축의 기울어짐, 진원도 및 표면거칠기를 연구하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.284-285
• /
• 2003

극저온복사계로부터 출발하여 광도의 기본 단위인 칸델라(Candela) 눈금은 물론 복사조도(irradiance), 조명도(illuminance)와 같은 유도 단위를 실현하기 위해서는 검출기의 시야를 한정하는 구멍의 면적을 측정하는 기술이 매우 중요하다. 구멍의 면적을 측정하는 한가지 방법은 탐촉자를 물리적으로 접촉시켜서 구멍의 가장자리를 결정하고, 구멍의 기하학적 모양을 가정하여 면적을 계산하는 것이다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.243-254
• /
• 2020

Korean traditional kite has the unusual shape of the elongated rectangle with the center hole. The aerodynamic forces are numerically computed on Korean traditional kite with aspect ratio 1:1.5 by using FLUENT software. Simulating the flight of the kite with various diameters of the center hole, the present study has investigated the role of the center hole as well as the effect of diameter of the center hole. The center hole plays a role in relieving the sudden increase of tension associated with fast rewinding of the kite thread in kite fighting, thereby enabling faster rewinding of the kite thread. The proper diameter of the center hole is 1/3 of the width.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.954-961
• /
• 2008

An experimental study has been conducted to investigate the flow field around the wing having a circular damage hole. The damage was represented by a circular hole passing through the model with 10% airfoil chord diameter and normal to the chord. The hole was centered at quarter or half chord. The PIV flow fields and static pressure measurements on the wing upper and lower surface were carried out at Rec=2.85×105 based on the chord length. The PIV results showed the two types of flow structures around a damage hole were formed. The first one was a weak jet that formed an attached wake behind the damage hole. The second one resulted from increased incidence; this was a strong jet where the flow through the hole penetrates into the free-stream resulting in extensive separation of oncoming boundary layer flow and development of a separated wake with reverse flow. The surface pressure data showed a big pressure alteration near the circular damage hole. The severity of pressure alteration was increased as a damage hole located nearer to the leading edge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.531-535
• /
• 2005

This study investigates the behavior of fatigue crack propagating between holes or holes lilted with another materials. It is experimentally and analytically confirmed that the center crack stops when its tip reaches near the center line of the holes and a small crack is initiated from the boundaries of holes or the holes filled with another materials and it propagates to final fracture. The mechanical behaviors of center crack near the another materials are also investigated. The phenomenon that this crack propagates to fracture is investigated by compliance method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.164-165
• /
• 2000

구멍에 의한 빛의 회절은 광학의 기본적인 문제로서, 최근 근접장 광학(Near-Field Optics)의 발전과 더불어서 파장보다 작은 구멍에서 일어나는 빛의 회절에 대한 관심이 고조되고 있다.$^{(1)(2)(3)}$ 본 연구에서는 그동안 주로 이론적으로 다루어지고 있던 파장보다 작은 금속 구멍을 통한 빛의 회절에 대해 실험결과들을 보고한다. 회절된 빛의 먼장(Far-field)과, 근접장(Near-field)을 모두 측정하기 위해서 고체각 주사기(Solid angle scanner)와 근접장 주사 광학 현미경(Near-field Scanning Optical Microscopy)이 사용되었다. 고체각 주사기(Solid angle scanner)를 사용하여 반구면 위에서의 빛의 이차원 세기 분포가 다양한 편광 상태에 따라서 측정되었고$^{(4)}$ 근접장 탐침(NSOM probe)으로 작은 금속 구멍주변을 주사함으로서 근접장이 측정되었다. 작은 구멍은 최근에 개발된 고출력 근접장 광섬유 탐침(High-power near-field fiber probe)구조를 이용하여 제작되었다.$^{(5)}$

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.77-85
• /
• 1996

Chestnut(Castanea crenata) were trunk-injected by two methods to check the changes around the injection wound. In September 1993, high concentration of oxytetracycline(OTC) was injected through the injection wound of 1cm diameter and low concentration of OTC through 0.5cm diameter. Trunk diameter of injected trees ranged from 10cm to 20cm. All trees were in their vigorous conditions. Tree reaction was examined in June, 1994. None of them showed any sign of decay by the time. However, under the bark, sapwood was remarkably discolored. But, more severe discoloration was found in 1cm-injection wound than in 0.5cm one. Sapwood of some trees split from the injection wound, and the split was longer in 1cm-injection wounded trees than in 0.5cm trees. From the split, callus grew out and the split was closing. In this kind of trunk injection, the damage was more severe in 1cm-injection wound than in 0.5cm-injection wound.