• Korean journal of food and cookery science
• /
• v.29 no.2
• /
• pp.185-192
• /
• 2013

The present study was conducted to evaluate the effects of Agarum cribrosum on weight change and defecation states in rats with constipation induced by loperamide. Food intake and body weight both decreased in the 5% Agarum cribrosum and loperamide-treated group (SD5) and 10% Agarum cribrosum and loperamide-treated group (SD10), whereas fecal water contents increased by 1.6 and 2.1-fold in the SD5 and SD10 groups, respectively. The concentrations of total-cholesterol, HDL-cholesterol and triglyceride in the sera of the SD5 and SD10 groups were lower than those in the control (C) group. However, the biochemical parameters, GOT (glutamic oxaloacetic transaminase), GPT (glutamic pyruvic transaminase), and glucose levels, were not affected by the level of Agarum cribrosum. In addition, the concentrations of total-cholesterol and triglyceride in the livers of the SD5 and SD10 groups were also lower than those in the control group. The results of the present study demonstrated that Agarum cribrosum might ameliorate constipation symptoms, and lower lipid concentrations in the blood and liver.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.243-254
• /
• 2020

Korean traditional kite has the unusual shape of the elongated rectangle with the center hole. The aerodynamic forces are numerically computed on Korean traditional kite with aspect ratio 1:1.5 by using FLUENT software. Simulating the flight of the kite with various diameters of the center hole, the present study has investigated the role of the center hole as well as the effect of diameter of the center hole. The center hole plays a role in relieving the sudden increase of tension associated with fast rewinding of the kite thread in kite fighting, thereby enabling faster rewinding of the kite thread. The proper diameter of the center hole is 1/3 of the width.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.411-419
• /
• 2017

Stress concentration is one of the causes of the damage due to the large stress than the mean stress acting on the bar. This paper presents the results for stress of a stepped bar with a hole under torsional loading. The analysis for stress concentration and shearing stress was done by ANSYS Workbench which is a commercial finite element analysis software. The analysis results on fillet and hole are increased as the distance between them are become close. In addition, the distribution of the maximum equivalent stress developed in the fillet and hole in the outside range of the specific distance L (-100 mm ~ 300 mm) was almost constant in the models used in the analysis. On the other hand, the distribution of the maximum equivalent stress developed in the fillet and hole in the inside range of the specific distance L (-100 mm ~ 300 mm) was rapidly increasing and decreasing the change in the models used in the analysis. In addition, it was also possible to identify the location where the differences between equivalent stresses of hole and fillet occurred within a specific distance L (-100 mm ~ 300 mm). The analysis results of paper can used when selecting a hole location in a stepped bar under torsional loading.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.284-285
• /
• 2003

극저온복사계로부터 출발하여 광도의 기본 단위인 칸델라(Candela) 눈금은 물론 복사조도(irradiance), 조명도(illuminance)와 같은 유도 단위를 실현하기 위해서는 검출기의 시야를 한정하는 구멍의 면적을 측정하는 기술이 매우 중요하다. 구멍의 면적을 측정하는 한가지 방법은 탐촉자를 물리적으로 접촉시켜서 구멍의 가장자리를 결정하고, 구멍의 기하학적 모양을 가정하여 면적을 계산하는 것이다. (중략)

• The Korean Journal of Zoology
• /
• v.38 no.3
• /
• pp.364-374
• /
• 1995

The taxonomic revision of the family Uranoscopidae from Korea was made on the basis of the speciemens collected in the coasts of the Korea from 1986 to 1994. The key to the species and genera for classification of the famiiy Uranoscopidae was provided with synonym and their distributions. The stagazer fishes from Korea are composed of 6 species in 3 genera: Uranoscopus Japonicus, U. bicinctus, U. chinensis, U. tosae, Gnathagnus eolngatus and Ichthyscopus lebeck sannio. The Korean stagazer fishes were widely distributed in the West and South Sea of Korea, but only Ichthyscopus lebeck sannio distributed in the around sea of Cheju Island.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.75-79
• /
• 1996

가공품 중에서 구멍가공이 차지하는 비율은 매우 높으며 또한 가공정밀도가 요구되어진다. 그러나구멍의 직경에 비하여 길이가 길어지면 칩의 배출, 절삭날부의 윤활이 어려워지고, 공구의 진동문제가있기 때문에 일반적인 가공으로는 불가능할 경우가 많다. 따라서 이에 적절한 가공방법은 고압력의 절삭유를 공급할 수 있는 공구를 이용하여 가공할 수 있으며, 그 대표적인 방법으로는 Spade Drill, Gun Drill, 및 BTA Dill에 의한 깊은구멍가공봅이다. 본 연구에서는 Single Tube BTA 드릴링 시스템에서 Single Edge BTA Drill을 사용 하여 깊은 구멍을 가공할 때 공작물 SM55C의 최적절삭 조건의 선정과 공구수명에 대하여 실험을 통하여 분석 하고자 하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.727-732
• /
• 1995

사용후핵연료 중간저장 시설의 누수사고시 예상되는 핵연료봉의 온도상승을 SFUEL 컴퓨터 코드 분석결과에 따른 실제 $UO_2$의 산화거동을 실험하였다. 외기 온도 38$^{\circ}C$에서 환기회수가 시간당 0, 1, 2회인 조건에서 저장용기 밑바닥 구멍 크기가 2.54, 5.08, 7.62 cm인 경우의 실험결과 환기회수 0회 바닥구멍 크기 2,54 cm 일 때 약 15시간 후 건전성 상실(0.6% 무게증가)이 일어났으며 환기회수 2회 바닥구멍 크기 7.62 cm 일 때는 약 21시간 이후에 건전성 상실이 일어나 가장 느렸다. 바닥구멍 크기가 증가할수록 공기 순환비의 영향을 크게 받으며, 또 외기 온도가 낮을 수록 공기 순환비의 영향을 크게 받았다.

• The Korean Journal of Mycology
• /
• v.20 no.1
• /
• pp.1-10
• /
• 1992

Fresh fungi were collected during field trips to Ullung Island from August, 1990, to September, 1991. Among them, some polyporoid fungi were recognized to the species. Thirty three species were identified, among which nine fungi were confirmed new in Korea and registered here with descriptions. These fungi are Auriporia aurulenta, Ceriporiopsis gilvescens, Ceriporiopsis subvermispora, Gloeophyllum trabeum, Junghuhnia separabilima, Oligoporus stipticus, Oxyporus similis, Phellinus lavigatus, and Polyporus melanopus.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.182-187
• /
• 1994

트위스트 드릴을 사용한 구멍은 구멍가공중 가장 경제적인 방법중의 하나이다. 그러나 트위스트 드릴에 의한 가공은 길이에 대한 구멍경의 비가 한정되어 있다. 깊이/직경(L/D)의 비가 통상 5배 이상의 경우의 적절한 가공방법은 거압력의 절삭유를 공급할 수 있는 공구를 사용하여 가공하고 있으며, 그 대표적인 방법은 Long drull, Gun drill, BTA drill 및 Ejector drill등이 있다. 이들 방법중 BAT drill은 다른 가공공구에 비하여 우수한 가공능율을 갖고 있다. 그러나 BAT드릴에 의한 심공가공은 1회 가공에 의하여 요구되는 품질을 만족시켜야 함으로 이에 대응한 연구가 요구되고 있다. 따라서 본 연구는 BAT드릴링 시스템에 BAT drrill을 사용하여 심공가공할때 공작물의 형상 즉 표면 거칠기 및 지원도등 미치는 영향에 대하여 실험을 통하여 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1056-1059
• /
• 2001

These days, as dynamic function and special properties to compare traditional material, $Al_20_3$ ceramic use all over the industry. But it is very difficult to process because of high hardness and brittleness. Therefore, in this paper, it was investigated that laser process parameter which can produce appropriate quality of $Al_20_3$ ceramic microhole machining.