• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.107-113
• /
• 1998

We investigated the effects of a long term application of soil amendments such as lime, silicate, compost, or combinations of these materials on the contents of Cu and Zn in paddy soil and brown rice. The results obtained from a sequential extraction of Cu and Zn in paddy soils and brown rice, using $H_2O$, $KNO_3$, $Na_2$-EDTA and $HNO_3$ and showed that the most of Cu and Zn were NaOH-extractable (organically bound form) and $HNO_3$-extractable (sulfide and residual form). Cu contents of NaOH and EDTA extractable increased with the long term application of compost while the contents of Zn extracted by $KNO_3$ was decreased even though $HNO_3$ extractable-Zn was prominent chemical form in paddy soils. The percentage and contents of Zn, extracted by $KNO_3$ for each combination treatment of soil amendments, was decreased but the contents of Cu was not affected. The content of NaOH extractable-Cu was proportionally increased with increase in organic matter content irrespective of the extractants used in this experiment. The contents of Zn and exchangeable K were also increased with increase in organic matter content. However, we could not find any relationship between the extractable forms of Cu and Zn, and CEC, OM. while increase in CEC, contents of cations, and organic matter decreased the content of Cu in brown rice.

• Korean Journal of Plant Resources
• /
• v.30 no.2
• /
• pp.160-166
• /
• 2017

This study was performed to develop the efficient phytoremediation model in the paddy soil contaminated with heavy metals by cultivating Pteris multifida and Artemisia princeps with different mixing ratios (1:0, 8:1, 6:1, 4:1). As a result of investigating the heavy metal accumulation of each plant per dried material (1 kg), content of arsenic and cadmium was the highest in aerial part of P. multifida (169.82, $1.70mg{\cdot}kg^{-1}DW$, each) among the treated group. Lead content was the highest ($12.58mg{\cdot}kg^{-1}DW$) in the aerial part of P. multifida cultivated with 8:1 mixed planting. But the content of copper and zinc was the highest (33.94, $61.78mg{\cdot}kg^{-1}DW$, each) in the aerial part of A. princeps with 8:1 treatment. Regardless of heavy metals, plant uptake from the $1m^2$ soil was the highest in 4:1 mixed planting group, which showed the best yield of A. princeps.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.3
• /
• pp.402-408
• /
• 1994

Human plasma low density lipoprotein (LDL) is the major factor of coronary heart disease.But recent studies suggest the normal LDL can be realdily oxidized by oxygen free radicals and not interact with LDL receptors.Lipoprotei particles consist of lipid and protein, and fatty acids are prone to oxidatioin.The fatty acid compositions of LDL from Koreans was compared with that of Westerners.From the results, the raio of unsaturated fatty acids of korean and Westerner approximately 30 and 70%, respectively.which means Westerners are more labile in the lipid oxidation of LDL than Koreams.Normal LDL was incubated with $CuSO_4$ in PBS to lead for the peroxidation of LDL, and it was tested by the detection of TBARS and free radicals.Then, ascorbate, ${\alpha}-tocopherol$ and hyaluronic acid were found to have effects of antioxidants on LDL oxidation.The amount of free radical increased as the extent of oxidation increased.The time course of free radical formation was similar to TBARS.Therefore, determination of free radical by Luminometer was much more convenient than that of TBARS.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.4
• /
• pp.23-29
• /
• 2000

We demonstrate the fabrication method of high-density and high-quality solder bump solving a copper (Cu) cross-contamination in Si-LSI laboratory. The Cu cross-contamination is solved by separating solder-bump process by two steps. Former is via-formation process excluding Cu/Ti under ball metallurgy (UBM) layer sputtering in Si-LSI laboratory. Latter is electroplating process including Ti-adhesion and Cu-seed layers sputtering out of Si-LSI laboratory. Thick photoresist (PR) is achieved by a multiple coating method. After TiW/Al-electrode sputtering for electroplating and via formation in Si-LSI laboratory, Cu/Ti UBM layer is sputtered on sample. The Cu-seed layer on the PR is etched during Cu-electroplating with low-electroplating rate due to a difference in resistance of UBM layer between via bottom and PR. Therefore Cu-buffer layer can be electroplated selectively at the via bottom. After etching the Ti-adhesion layer on the PR, Sn/Pb solder layer with a composition of 60/40 is electroplated using a tin-lead electroplating bath with a metal stoichiometry of 60/40 (weight percent ratio). Scanning electron microscope image shows that the fabricated solder bump is high-uniformity and high-quality as well as symmetric mushroom shape. The solder bumps with even 40/60 $\mu\textrm{m}$ in diameter/pitch do not touch during electroplating and reflow procedures. The solder-bump process of high-uniformity and high-density with the Cu cross-contamination free in Si-LSI laboratory will be effective for electronic microwave application.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.83-88
• /
• 1999

Purpose: TLD experiments were set up to measure the dose distribution and to analyze the influence on dose measurement of thin metal plate and solid water phantom. The aim of the present study was to investigate the build-up effect of metal plate loaded on TLD chip and depth dose in the controlled environment of phantom measurements. Materials and Methods: Measurements were done by using LiF TLD-100 loaded by a thin metal plate with the same surface area (3.2$\times$3.2 $\textrm{mm}^2$) as TLD chip. TLD chips loaded with one metal plate from three different metal plate (Tin, Copper, Gold) of different thicknesses (0.1, 0.15, 0.2, 0.3 mm) were used respectively to measure radiation dose. Using the TLD loaded with one metal plate, surface dose and the depth dose at the build-up maximum region were investigated. Results: Using a metal plate on TLD chip increased the surface dose. Surface dose curve shows the dose build-up against equivalent thickness of metal to water. The values of TL reading obtained by using metal plate at depth of build-up maximum are about 8% to 13% lower than those obtained by normal TLD chip. Conclusion: The metal technique used for TLD dosimetry could provide clinicals information about the build-up of dose up to 4.2mm depth in addition to a depth dose distribution. The results of TLD with a metal plate measurements may help with decisions to boost or bolus certain areas of the skin.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.153-159
• /
• 1999

Fifteen microbes have been isolated from Jangja pond in Kuri-Si, Kyeonggi-Do. Among them, two strains showed excellent COD removal from wastewater, which were named Pseudomonas sp. BLP2052 and Flavobacterium sp. BLP20515, respectively. Optimal pH and temperature for the cell growth were 7.0 and $30^{\circ}C$ for both strains. Pseudomonas sp. BLP2052 and Flavobacterium sp. BLP20515 was applied to the reactor to treat wastewater and 66.0% and 65.7% COD (chemical oxygen demand) removal was achieved, respectively. Comparing these results to the case of applying mixed microbes present in Jangja pond, COD removal rate was 15% less. But when adding the selected microbes to the wastewater containing mixed microbes, COD removal rate increased by 5%. After 84 hour operation, we achieved 85.6% COD removal. When inhibitors were added less than 100 ppm, during the microbial wastewater treatment, Fe, Zn, Al, phenol and Cr influenced microbial activity more deterioratively in order. In the case of over 300 pm, Cr, Fe, Zn, Al and phenol showed severe deteriorative effect in order.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.441-446
• /
• 2012

In this study, mercury, methylmercury and heavy metals in sediment from the lake Andong were analyzed, along with the estimation of mercury flux between sediments and water in the lake Andong. Average mercury concentrations in sediments sampled in 2009~2011 were $155.0{\pm}71.9$ ng/g, $211{\pm}62$ ng/g and $198{\pm}6.88$ ng/g, respectively. The average methylmercury concentration were $1.85{\pm}1.09$ ng/g (2009) and $3.49{\pm}1.79$ ng/g (2011), and %methylmercury, the fraction of methylmercury in total mercury were $1.17{\pm}0.39%$ and $1.77{\pm}0.94%$, respectively. Heavy metal (Zn, Cd, Pb, Cu) concentrations of the sediments exceeded ERL (Effect Range Low) level of US NOAA (National Oceanic and Atmospheric Administration)'s sediment quality criteria. Estimated mercury sedimentation flux was found to be 83.7 $ng/cm^2{\cdot}yr$ and mercury diffusion flux was estimated as 1.24 $ng/cm^2{\cdot}yr$.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.2
• /
• pp.207-215
• /
• 2014

Wastewater containing heavy metals such as copper (Cu) and nickel (Ni) is harmful to humans and the environment due to its high toxicity. Crystallization in a fluidized bed reactor (FBR) has recently received significant attention for heavy metal removal and recovery. It is necessary to find optimum reaction conditions to enhance crystallization efficacy. In this study, the effects of crystallization reagent and pH were investigated to maximize crystallization efficacy of Cu-S and Ni-S in a FBR. CaS and $Na_2S{\cdot}9H_2O$ were used as crystallization reagent, and pH were varied in the range of 1 to 7. Additionally, each optimum crystallization condition for Cu and Ni were sequentially employed in two FBRs for their selective removal from the mixture of Cu and Ni. As major results, the crystallization of Cu was most effective in the range of pH 1-2 for both CaS and $Na_2S{\cdot}9H_2O$ reagents. At pH 1, Cu was completely removed within five minutes. Ni showed a superior reactivity with S in $Na_2S{\cdot}9H_2O$ compared to that in CaS at pH 7. When applying each optimum crystallization condition sequentially, only Cu was firstly crystallized at pH 1 with CaS, and then, in the second FBR, the residual Ni was completely removed at pH 7 with $Na_2S{\cdot}9H_2O$. Each crystal recovered from two different FBRs was mainly composed of CuxSy and NiS, respectively. Our results revealed that Cu and Ni can be selectively recovered as reusable resources from the mixture by controlling pH and choosing crystallization reagent accordingly.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.199-205
• /
• 1997

Water quality of streams and ground water from areas of different agricultural practices in the small catchments of the Han River basin was investigated. Water samples were collected from upper, middle and lower reaches of the Han River Basin where three types of agricultural management have been practiced : (1) highland agriculture and livestocks in Daegwanryung area, (2) typical upland and paddy farmings in Dunnae (Jucheon River) and Chuncheon (Soyang River) areas, and (3) intensive farming in the plastic film house in Guri area (Wangsuk stream). Water quality was monitored for EC, pH, COD, TSS, N, rations and anions. Concentrations of N, especially nitrate, and phosphorus in both stream and ground water exceeded the standard water quality criteria in many cases, but those of heavy metals were non-detectable or trace in most cases, except for Wangsuk stream where a high level was detected in a specific sampling time. Chemical criteria such as pH, EC and COD of the stream were suitable for irrigation purpose, but nitrate concentrations in ground water used in the intensive plastic film house were high enough to require a special management consideration. A model on the irrigation water quality incorporating EC and nitrate concentrations was suggested in view of fertilizer management and environmental quality.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.200-204
• /
• 1998

Physical and chemical properties of artificial soil produced by firing process were analyzed and compared with normal dry field soil and soil quality standards. Material used for production was water and wastewater treatment sludge, chabizite, and lime. The mixed material was thermally treated in the firing kiln at about $300^{\circ}C$ and $1,000^{\circ}C$, respectively, as per designed process. General properties of the artificial soil were classified as sand by unified soil classification method and similar to the dry-field soil, and even soil conditioning effect were expected when it is mixed properly with normal soil. The artificial soil is high in pH and permeability compared to the dry-field soil. Heavy metal concentrations of the artificial soil met the soil quality standards for the farmland. Overall, the artificial soil was thought to be an appropriate soil which can be returned safely to the nature without significant adverse effect. The cost for the artificial soil production process needs to be lowered for practical application as a sludge treatment, therefore, commercializing of the artificial soil is under review.