• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3806-3813
• /
• 2012

The coastal environment is affected by Cu and Zn contamination through diverse routes, including antifouling agents, industrial wastewater, and domestic activities. In this study, Crassostrea gigas and Littorina brevicula were used to examine the distributions of Cu and Zn, which are related to the increase in the use of new antifouling agents that have been used for ships since the TBT ban in 2003. The average Cu and Zn concentrations in the samples were 231.8 ${\mu}g/g$ and 492.6 ${\mu}g/g$, respectively. Both the Cu and Zn concentrations were highest in the shipyard samples, followed by the harbor sample for Cu and the industrial area sample for Zn. The results indicated that the Cu concentration was affected by the antifouling agents, and the Zn concentration was affected by both the antifouling agents and industrial wastewater. The areas that need intensive control to address the Cu and Zn contamination in major Korean coasts were identified.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2019

To protect the Cu surface from oxidation in air, a two-step plasma process using Ar and $N_2$ gases was studied to form a copper nitride passivation as an anti-oxidant layer. The Ar plasma removes contaminants on the Cu surface and it activates the surface to facilitate the reaction of copper and nitrogen atoms in the next $N_2$ plasma process. This study investigated the effect of Ar plasma on the formation of copper nitride passivation on Cu surface during the two-step plasma process through the full factorial design of experiment (DOE) method. According to XPS analysis, when using low RF power and pressure in the Ar plasma process, the peak area of copper oxides decreased while the peak area of copper nitrides increased. The main effect of copper nitride formation in Ar plasma process was RF power, and there was little interaction between plasma process parameters.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.135-135
• /
• 2014

폴리이미드 필름 위에 습식도금으로 형성된 구리피막에서 시효처리 시간에 따른 박리강도의 변화를 실험적으로 확인하였다. 그 결과, 시효처리 4시간까지 큰 변화가 없다가 4시간부터 10시간 사이에서 급격히 증가하는 경향을 나타내었다. 시효처리 시간에 따른 박리강도 증가의 원인을 구리-폴리이미드 사이 계면 및 구리도금 피막 자체의 특성 변화의 관점에서 해석하였다.

• The Korean Journal of Zoology
• /
• v.37 no.1
• /
• pp.58-65
• /
• 1994

Phosphatase의 저해제로 알려진 okadaic acid(OA)가 한국산 개구리(북방산개구리 참개구리) 난자의 성숙에 미치는 효과를 조사하였다. 북방산개구리 난자에 약 50 nl의 okadaic acid(0 5-500 mM)를 미세주입한 후 18시간 배양한 결과 0.5 mM의 농도에서 부터 난자의 핵붕괴를 일으키기 시작하였다 동면초기에 처리한 progesterone에 반응하지 않는 난자들도 OA에 의하여 성숙을 일으켰으며. 이 성숙은 배양액에 첨가한 cycloheximide(10 mg/ml)에 영향을 받지 않았다 또한 OA의 처리를 받고 일정시간 배양한 난자의 세포질에는 미성숙 난자의 성숙을 유도하는 maturation promoting factor (MPF)의 활성이 생기었다 참개구리의 난자도 역시 OA에 의해 성숙이 유도되었으며, 주입 후 6시간에서부터 핵붕괴가 일어나기 시작하였다 참개구리에서도 OA의 처리가 MPF의 활성을 촉진하는 것을 세포질내에 Hl histone kinase의 활성도가 증가하는 것으로 확인할 수 있었다 참개구리에서도 OA에 의한 성숙은 cycloheximide나 CAMP에 의해 영향을 받지 않았다 이러한 결과들은 개구리 난자의 MPF 활성화와 성숙과정에 phosphatase가 관여함을 보여주는 것이다.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.71-79
• /
• 1992

Selective extraction procedure has been used to quantify copper and cadmium In association with the various phases of aquatic sediment such as exchangeable/adsorbed, carbonate, manganese oxides, organic matter and iron oxides. Changes of pH influenced on the partitioning of copper in carbonate and exchangeable/ad- sorbed phases and of cadmium in carbonate phase of aquatic sediment. Addition of NTA and EDTA, copper and cadmium associated with carbonate phase were released from sediment to water. Total partitioning coefficient was 8.361 for copper and 0.497 for cadmium. The relative binding strengths of copper and cadmium to each solid phase can be ranked by using the partitioning coefficints. For copper it was observed that carbonate > organic matter > exchangeable/adsorbed > manganese oxides > iron oxides and for cadmiunm it was observed that exchangeable/adsorbed > carbonate > manganese oxides > organic matter > iron oxides.

• Korean Journal of Ecology and Environment
• /
• v.52 no.1
• /
• pp.13-20
• /
• 2019

Heavy metals resulted from the increase of human industrial activity are introduced into the environment through rainfall and wastewater, and have harmful effects on inhabitants. In this study, we investigated biological responses such as survival rate, growth rate, emergence rate and sex ratio, and morphological effects of mentum deformity in Chironomus plumosus, an indicator organism to evaluate pollutions on aquatic ecosystem. The survival rate of C. plumosus showed time- and dose-dependent decrease after chromium and copper exposures. Growth rate decreased at $4^{th}$ day after chromium exposure and significantly reduced at exposure to relatively high concentration (copper $1000mg\;L^{-1}$) for all exposure times. In addition, we observed that the emergence rate by exposure to copper $1000mg\;L^{-1}$ was significantly lower than that of the control group. The imbalance of sex ratios showed at relatively low concentrations (chromium 10 and $50mg\;L^{-1}$) with the high proportion of female and at the relative high concentration (copper $1000mg\;L^{-1}$) with the high proportion of male. Furthermore, the morphological mentum deformities of C. plumosus observed in the exposed group according to chromium and copper exposure. These results suggest that the heavy metal exposure in environment may influence biosynthetic and morphological stresses of benthic invertebrate C. plumosus, and aquatic midge C. plumosus are potential indicators for toxicity assessment of heavy metals such as chromium and copper.

• 한국전기화학회:학술대회논문집
• /
• 2000.04a
• /
• pp.21-21
• /
• 2000

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.559-566
• /
• 2013

The effects of solid surface roughness on the contact angle of a nanofluid droplet were experimentally investigated. The experiments were conducted using the solid surface of a 10 mm cubic copper block and the nanofluid of water mixed with CuO nanoparticles. The experimental results showed that the contact angles of nanofluid droplets were lower than those of water droplets and that the contact angle of the nanofluid droplet increased with the solid surface roughness. Furthermore, it was found that the contact angles of water droplets on the solid surface quenched by both water and the nanofluid were lower than those of water droplets on the pure solid surface. However, significant differences were not observed between the contact angles on the solid surfaces quenched by water and the nanofluid.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.958-964
• /
• 2005

Experiment was conducted to investigate the amount of hydrogen gas and the characteristics of organic acids production from various carbohydrates by anaerobic bacteria. The variation characteristics of organic acids and hydrogen gas production at the fermentative culture were also studied in the presence of heavy metals such as cadmium or lopper. 3.43 mole hydrogen per mole of hexose was produced when sucrose was used as a carbon source. Acetic acid and butyric acid were main products by the anaerobic fermentation. Hydrogen production rate was decreased and formation of acetic acid was increased as the concentration of heavy metals was increased in the medium. The inhibition of hydrogen production by the copper was more serious than the cadmium.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.260-260
• /
• 2012

최근 IT산업의 급속한 발달로 모바일 제품과 반도체 및 IC 패키지 등의 전자제품의 소형화, 경량화 및 고성능화되어 가고 있다. 따라서 반도체 공정에서 단위소자의 고속화를 구현하기 위한 금속배선공정에 사용되는 금속재료가 최근에 최소 선폭을 갖는 디바이스에서는 구리를 배선 재료로 전환하고, 향후에는 모든 디바이스가 구리를 주요 배선재료로 사용할 것으로 예측되고 있다. 반도체 소자 공정 중 시료 표면 위에 형성되는 오염물은 파티클, 유기오염물, 금속 불순물 그리고 자연 산화막으로 나눌 수 있다. 구리 표면에 생성되는 부식생성물의 종류에는 CuO, $Cu_2O$, $Cu(OH)_2$, $CuCO_3{\cdot}Cu(OH)_2$와 같은 생성물들이 있다. 이러한 부식생성물이 구리박막 표면에 형성이 되면 성장된 구리박막의 특성을 저하시키게 된다. 이러한 다양한 오염물들을 제거하기 위해서 여러 가지 전처리 공정에 대한 연구가 보고되고 있다. 본 연구에서, 스퍼터 방식으로 구리를 증착한 웨이퍼 (Cu/Ti/Si) 를 대기 중에 노출시켜 자연 산화막을 성장시키고, 이 산화막과 대기로부터 흡착된 불순물을 제거하기 위해 계면 활성제인 TS-40A와 $NH_4OH$ 수용액을 사용하여 이들 수용액이 구리 표면층에 미치는 영향에 대해 조사 분석하였다. 사용된 TS-40A는 알칼리 탈지제로서 웨이퍼 표면의 유기물을 제거하는 역할을 하며, $NH_4OH$는 구리를 제거하는 부식액으로 산업현장에서 널리 사용되고 있다. 다양한 표면 전처리 조건에 따른 구리박막 표면의 형상 및 미시적 특성변화를 SEM과 AFM을 이용하여 관찰하였고, 표면의 화학구조 및 성분 변화를 관찰하기 위해 XPS를 측정하였으며, 전기적 특성변화를 관찰하기 위해 4-point prove를 사용하여 박막의 면저항을 측정하였다.