• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.1
• /
• pp.17-26
• /
• 1999

This study was conducted to investigate the effect of Zn and Fe levels on lipid metabolism and micromineral contents in high fat diet-induced obese rats. Male sprague-dawley rats weighing approximately 100g were fed a normal or high fat diet. After 10 weeks high fat diet, rats were fed different levels of Zn and Fe. Serum triacyglycerol and HDL-cholesterol were affected to Zn and Fe levels in normal group. The micromineral (Zn, Fe, Cu, Mn) contents in liver were significantly different in high fat diet group by Zn intake levels and in normal diet group by Fe intake levels. However, micromineral contents in kidneys were not affected to different levels of Fe in both obese and normal rats. There were no differences in spleens of obese rats fed high fat diet according to Zn and Fe intake levels. But in normal group, Mn content of spleen were exclusively affected to Zn levels.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.235-241
• /
• 2003

The polyacrylonitrile (PAN)-based activated carbon fibers (ACFs) containing copper metal were electrolytically prepared in introducing the antibacterial activity into ACFs. The antibacterial activity was investigated by dilution test against Staphylococous aureus (S. aureus; gram positive and virulence) and Klebsiella pnemoniae (K. pnumoniae: gram negative and avirulence). The micropore and textural properties of the ACFs containing copper metal were characterized by BET, t-plot, and H-K methods. The ACFs showed slight decreases in BET's specific surface area, micropore volume, and total pore volume as copper metal increased. However, the antibacterial activities of the ACFs were strongly increased against S. aureus as well as K. pnumoniae, which could be attributed to the presence of copper metal in CU/ACFs systems.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.307-313
• /
• 2010

Quantitative analytical condition for lead and cadmium in copper contained carbon materials using solvent extraction followed by inductively coupled plasma-atomic emission spectrometry was studied. Copper contained carbon samples were dissolved by nitric acid-perchloric acid digestion. Lead and cadmium were determined after separation with KCN masked copper by an dithizone-chloroform solvent extraction. Recovery efficiency of analyte elements was satisfactory, and most of matrix elements causing interference could be effectively eliminated by the separation. Lead and cadmium were quantitatively determined without influence of sample matrix, by applying it procedure to artifact sample.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.45-50
• /
• 2008

The effects of electrolytes and additives on the electropolishing of 50 and $20{\mu}m$ diameter copper via were investigated to flatten 3D SiP through via. The termination time was determined with analysis of applied potential on anode and cathode to avoid excess electropolishing. Acetic acid played a role of accelerator and glycerol played a role of inhibitor in phosphoric acid electrolytes. The overplated copper on the through via was effectively electropolished in the phosphoric electrolytes with acetic acid and glycerol addition. The electropolishing was terminated at the point of abrupt change of applied potential to remove only overplated copper on the through via.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.300-300
• /
• 2011

알루미늄을 이용한 배선은 반도체 소자가 초집적화와 초소고속화 됨에 따라, 피로현상과 지연시간 등 배선으로서의 많은 문제점을 가지고 있어, 차세대 배선 재료로서 전기적인 특성 등이 우수한 구리에 대한 연구가 많이 진행되고 있다. 하지만, 구리는 낮은 온도에서 확산이 잘되어 배선 층간의 절연에 문제점을 야기 시킨다. 따라서, 구리를 배선에 적용하여 신뢰성 있는 제품을 만들기 위해서는 확산방지막이 필요하다. 확산방지막은 집적화와 더불어 배선의 두께가 줄어 듦에 따라 소자의 특성에 영향을 미치지 않는 범위 내에서 저항은 낮고, 두께는 얇아야 하며, 높은 종횡비를 갖는 구조에서도 균일한 박막을 형성하여야 하므로, 원자층 증착공정을 이용한 연구가 주를 이루고 있다. 텅스텐 질화막을 이용한 확산방지막은 WF6 전구체를 이용한 보고가 많지만, 높은 증착 온도와 부산물로 인한 부식가능성 이라는 문제점을 안고 있다. 따라서 본 연구에서는, 기존의 할라이드 계열을 이용한 원자층 증착공정의 단점을 보완하기 위하여, 아마이드 계열의 전구체를 사용하여 텅스텐 질화막을 형성하였으며, 이를 통해 공정온도를 낮출 수 있었다.

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.126-135
• /
• 1988

Acrylonitrile-Acrylic acid 공중합체와 이를 amidation시킬 공중합체에 구리착물을 형성시켜 IR spectrum분석, 점도측정, 전자현미경관찰, 열분석, 전기전도성등을 검토하였다. AN-AA 공중합체-Cu(II)와 아미드화 AN-AA 공중합체-Cu(II)착물은 pH9의 범위에서 가장 안정한 값을 가지며 착물이 형성되거나 Cu$_{x}$S가 도입된 공중합체는 그 구조가 ompact해짐을 알 수 있었다. 공중합체에 Cu(II)착물이 형성되면 열안정성이 감소되며 Cu(II)착물은 아세톤 용액에서 요오드로 dope 될 때 저항값이 $10^{5}$-$10^{6}$.OMEGA..cm를 나타냈다. 저항값은 CuCl$_{2}$와 I$_{2}$의 양에 영향을 받으며 20wt% 이상의 CuCl$_{2}$와 1.0wt% I$_{2}$로 처리하였을 때 반도체영역의 저항값을 보였다. 또 Cu$_{x}$S를 도입할 경우 CuSO$_{4}$의 농도가 30g/l로, 3시간 반응시켰을 때 가장 만족스러운 전도도값을 나타냈다. 공중합체-Cu(II)보다 구리이온을 도입한 Cu$_{x}$S공중합체의 전도도값이 $10^{4}$정도로서 공중합체-Cu(II)보다 높은 전도성을 나타냈다.다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.121-121
• /
• 2009

구리 전해정련 과정에서 전해액 중의 Arsenic과 같은 불순물 성분이 전기동의 전착에 미치는 영향을 확인하고, 전해액 중의 최대 허용 농도를 도출하고자 하였다. 전해정련 과정에서 분순물 성분이 전기동 전착에 미치는 영향을 주사전자현미경(SEM), X-선 회절(X-ray diffraction) 및 전기화학적 분석을 통해 수행하였다.

• Applied Biological Chemistry
• /
• v.28 no.2
• /
• pp.76-81
• /
• 1985

Miscible displacement techniques were used to investigate the influence of the organic matter treatment on the mobility of Cd, Zn, and Cu through soil columns. The heavy metals moved most readily through the Bonryang soil (Typic Udifluvents) of relatively low in CEC, pH, and organic matter content. Most parts of Cd and Zn eluted within 7 pore volumes, but Cu eluted between 5 and 15 pore volumes. Although the Gangseo soil (Aquatic Eutrochrepts) had lower in CEC and organic matter content than the Gyorae soil (Typic Distrandepts), the heavy metals moved faster through the Gyorae soil than through the Gangseo soil. Cu eluted more slowly and in smaller quantities than Cd and Zn from the Bonryang soil, but did not eluted from the Gangseo and the Gyorae soils at all during the experimental period. The motility of the heavy metals from the Bonryang and the Gangseo soils was in the order of Cd>Zn>Cu, but that of the Gyorae soil was in the order of Zn>Cd>Cu. Cd and Zn eluted after 5 and 20 pore volumes respectively, from the Bonryang soil treated with 3% compost but Cu did not elute even after 30 pore volumes were collected. By 7% compost treatment only small amountssof Cd eluted after 20 pore volumes. The liming of the Bonryang soil retarded the mobility of Cd, Zn, and Cu. Humic acid treatment did not reduce the motility of the Cd and Zn to the extent observed in the Bonryang soil with compost, but reduced a little motility of Cu.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.706-714
• /
• 2017

An investigation of the effects of Pb for domestic anuran embryos were evaluated with the Frog Embryo Teratogenesis Assay; Xenopus (FETAX). Depending on the species, the difference between the embryo size and the embryonic development time was determined. As a result, mortality and malformation rates were increased, malformation patterns were changed and larval body length were decreased in a dose dependent manner of the Pb. The half maximal lethal concentration ($LC_{50}$) of the Bufo gargarizans, Hyla japonica, Rana nigromaculata and Bombina orientalis were 0.58, 0.49, 0.52, $0.54mg\;L^{-1}$, respectively. The half maximal effective concentration ($EC_{50}$) of the Bufo gargarizans, Hyla japonica, Rana nigromaculata and Bombina orientalis were 0.35, 0.74, 0.30, $0.29mg\;L^{-1}$, respectively. The teratogenic index (TI) were 1.66 in the Bufo gargarizans, 1.81 in the Hyla japonica, 1.73 in the Rana nigromaculata and 1.86 in the Bombina orientalis, respectively. Therefore, the Pb seems likely to have a teratogenic effect in all four species' embryonic development. The Bombina orientalis was the most sensitive to the Pb. This means that the difference between the different species, even if they have all been exposed to the same concentration of pollutants depending on the species. The result above show that the Pb acts as a teratogenic agent in the development of the four domestic frog species.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.208-214
• /
• 1989

A method for the simultaneous determination of copper and cobalt by spectrophotometry has been described. The procedure involves the co-extraction of Cu(Ⅱ) and Co(Ⅱ) from 0.3M HCl into methyl isobutyl ketone as the ion-pairs formed between their thiocyanate complexes and high molecular alkylamines such as Amberlite LA1, Alamine 336, and Aliquat 336. The extract shows the color development to have the maximum absorbances at two different wavelengths i.e., 480 nm for copper and 625 nm for cobalt. Since the spectra of the ion-pairs overlap each other, two simultaneous equations are used to obtain the concentrations from absorbances. Even small amount of Fe(Ⅲ) and Ni(Ⅱ) interferes with the determination of copper. The results of the analysis of samples are in good agreement with the results determined by separate methods within RSD 5.9%.