• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.77-78
• /
• 2011

한국해양연구원에서 개발 중인 Crabster 로봇팔을 기구학적으로 분석하고, 속도기구학을 매트랩을 이용하여 작업공간에 대해서도 분석 및 해석을 완료하였다. 운용자와 Crabster 로봇팔의 움직임을 고려해 개념 설계한 인간팔 크기의 7축 마스터 암 및 그립퍼의 기구부에 대해 2D 및 3D의 도면을 완성하였고, 마스터 암에 적용할 모터의 사양과 각 관절에 피드백 된 힘을 반영하기 위한 구동 모터의 엔코더를 이용한 위치 센서, DSP2812를 이용한 제어 명령 입력 장치와 구동 모터 드라이버를 포함한 마스터 - 슬레이브 시스템의 개념 설계를 완성하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.648-657
• /
• 2014

This paper is about the study on a newly developed small waterproofed 4-axis robot arm and the analysis of its kinematics and dynamics. The structure of robot arm is designed to have Pitch-Pitch-Pitch-Yaw joint motion for inspection using a camera on itself and the joint actuator driving capacity are selected and the joint actuators are designed and test for 10m waterproofness. The closed-form solution for the robot arm is derived through the forward and inverse kinematics analysis. Also, the dynamics model equation including the damping force due to the mechanical seal for waterproofness is derived using Newton-Euler method. Using derived dynamics equation, a sliding mode controller is designed to track the desired path of the developed robot arm, and its performance is verified through a simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.533-539
• /
• 2012

The purpose of this study is to estimate a validity of control signal through a design of Exoskeleton Robot Arm's capable of intelligent recognition as a human arm's motion by using realtime processed data of generated EMG signals. By an intelligent algorithm, the EMG output value of human biceps and triceps muscles contraction can be recognized and used for the control over exoskeleton arm corresponding to human's recognition and judgement. The EMG sensing data of muscles contraction and relaxation are used as the input signal from human's body to operate the Exoskeleton Robot Arm thus copying human arm motion. An intelligent control of Exoskeleton Robot Arm is to design the analog control circuit which processes the input data, and then to manufacture an integrated control board. And then abstracted signal is passed by DSP signal processing, Fuzzy logic algorithm is designed for a accurate prediction of weight or load through the intelligent algorithm, and design an Exoskeleton Robot Arm to express a human's intention.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.60-67
• /
• 2011

In this paper, the structure of a gravity compensator(GC) was studied, and the 6-axis robot manipulator which is newly developed by applying the GC is presented to improve the torque performance and repeatability error of the robot joint. The kinematics analysis on the robot was presented. Also, experiments of the performance of the joint actuator of robot adopting the gravity compensator were presented by the GC to $1^{st}$ and $2^{nd}$ joints of the robot arm. According to the experiment results, it was validated that the position errors and load torque of the robot joint actuator adopting the GC are reduced significantly.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3018-3020
• /
• 1999

본 논문에서는 손과 발을 자기의 의지대로 움직일 수 없는 장애인들이 전동 휠체어나 로봇 팔과 같은 보조 장치를 손, 발의 사용 없이 조작 할 수 있는 시스템 개발을 위한 연구에 대해서 소개한다. 손과 발을 사용하지 않고 전동 휠체어나 로봇 팔을 조작하려면 장애인의 의도를 파악하고 이 정보에 의한 구동 방식이 필요하게 된다. 본 연구에서는 장애인의 눈동자의 움직임과 머리의 움직임 그리고 음성 신호를 이용하여 보조 장치들을 구동시키고자 한다. 이를 구현하기 위해서는 시선의 방향을 측정할 수 있는 기술과 머리의 위치와 방향을 측정하는 기술, 그리고 음성으로 표현되는 간단한 명령들을 인식할 수 있는 기술이 필요하며, 이러한 기술의 통합을 바탕으로 보조장치들을 구동시키기 위한 편리한 사용자 지향의 인터페이스 기술을 개발하고자 한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.3
• /
• pp.189-199
• /
• 2004

A bridge transported servo manipulator (BTSM) system for the advanced spent fuel conditioning process (ACP) has been developed to overcome the limitation of access, which is a drawback of mechanical master-slave manipulators (MSM) for the equipment maintenance. The servo manipulator is composed of a slave manipulator attached to the telescoping tubesets equipped with the overhead bridge installed at a hot cell and a master manipulator installed at an out-of-hot cell. Each manipulator has 7 degrees-of-freedom (DOF): a body rotation, an upper-arm tilt, a lower-arm tilt, a lower-arm rotation, a wrist pan & tilt, and a grasp motion. A wire-driven mechanism for a lower-arm rotation, a wrist pan and tilt, and a grasp motion of the manipulator has been adopted to increase the handling capacity compared to the manipulator weight and decrease the friction. The main disadvantage of the wire-driven mechanism is that if one link is in motion, other links can be affected. In this paper, the transmission characteristics among the wire-driven links have been formulated to overcome this drawback. The unexpected behaviors are confirmed by analyses of transmission characteristics as well as experiments. Also, the experimental results show that the unexpected behaviors are greatly decreased by the proposed compensation equations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.161-164
• /
• 2008

A realization for EMG signal sensing and vertical control system of robotizing arm is presented in this paper. The system is realized that a fine EMG bio-signals of humans' arm muscle are detected by surface electrode sensor, making a high performance amplifier and filtering, converting analog into digital signal and driving a servomotor for robotizing arm. The system is experimented by monitoring multiple step vertical control angles of robotizing arm corresponding to EMG signals in moving arm muscles. The experimental result are that the vertical control level is measured to around 2 degrees and mean error is 5% approximately.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.409-412
• /
• 2021

본 논문에서는 카페나 패스트푸드점같은 장소에서 인간을 대신하여 임의의 위치에 있는 다양한 컵을 3D 카메라로 검출하여 알맞은 위치로 분리수거하는 6축 수직 다관절 로봇 팔을 설계하였다. Yaw-Pitch-Pitch-Pitch-Yaw-Yaw 6축 구조로 설계하였으며, 이를 구동하기 위한 관절 구동기의 용량을 분석을 통해 최적화하였다. 각각 재질이 다른 컵을 그리퍼를 이용하여 잘 파지할 수 있도록 재질에 따른 파지력을 분석하였고 압력센서를 이용하여 재질이 다른 컵을 구분하여 분리수거 할 수 있도록 하였다. 실험을 통해 로봇의 성능과 개선점을 제시하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.301-303
• /
• 2018

This paper describes a robot control system and control method of a human arm type redundant manipulator. The control of a redundant manipulator suffer from computational complexity and singularity problem because of numerical inverse kinematics. To deal with such problems, analytical methods for a redundant robot arm have been researched to enhance the performance of inverse kinematics. In this research, we propose a numerical control method and weighted pseudo inverse kinematics algorithm. Using this algorithm, it is possible to generate a trajectory passing through the singular points and intuitively move the elbow without regard to the end-effector pose. Performance of the proposed algorithm was verified by various simulations. It is shown that the trajectory planning and using this algorithm provides correct results near the singular points and can utilize redundancy intuitively. We proved this system's validity through field test.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.221-229
• /
• 2013

To achieve the best performance, the concept of drag reduced and power increased Human Power Aircraft(HPA) was presented by analyzing the HPAs in the world. To participate the '2012 HPA competition' in Korea, the streamlined fuselage and the simultaneous use of hands and feet were introduced. Furthermore the CFD analysis and power unit design were performed to verify the concept. In order to make the best use of streamlined fuselage effect, the fuselage shape design is important and to supply the hand power to the power unit, the control system design is important, also the test flight is required for validation.