• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.442-445
• /
• 2001

The sustaining driver for color ac plasma display panel should provide alternating high voltage pulses and recover the energy discharged from the intrinsic capacitance between the scanning and sustaining electrodes inside the panel. In this paper, a novel efficient energy recovery circuit employing boost-up function is proposed to achieve a faster rise-time and in order to obtain a stable sustain voltage. The principle of operation, features, and simulated results are illustrated and verified on an equivalent capacitance, which is equals In that of 40-inch-panel, 200 (kHz).

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.2
• /
• pp.74-78
• /
• 2010

In this paper, 2-axis driving mechanism, which uses voice coil motor (VCM), is proposed to measure the friction force. The proposed VCM actuator consists of two parts; structural part and magnetic circuit part. Structural part is simplified to perform the friction experiments. Magnetic circuit part is composed of two parts. The experiments are accomplished by changing the mass of moving part. Through the experiments, optimal dimension is selected. Finally, the experimental results are verified and the optimal case is applied to the 2-axis driving mechanism, optical image stabilization actuator.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.175-180
• /
• 2013

This paper presents the design and implementation of a Bicycle Locker System. Generally DC motor has been used to control a Bicycle Locker System, but DC motor system requires frequent maintenances and its power efficiency is comparatively poor especially under heavy load conditions. In order to improve this difficulties, this paper adopts BLDC motor for a Bicycle Locker System and its motor controller is developed. The performances of locker units are compared between DC motor unit and BLDC motor unit. The motor power consumptions between two motors are discussed. Test results verify that power efficiency of the suggested BLDC drive unit is considerably improved compared to the DC drive unit with load condition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.4
• /
• pp.3-9
• /
• 2010

Recently, Applications of BLDC motor have grown gradually in energy savings and controls of speed and torque. But most of BLDC motors need controller and driving circuits aside from motor, according to various situations. In this paper, it was designed for a embedded controller and motor including microprocessor that programmable intelligent control as various circumstances. And in order that the user conveniently use better than to use web browser using TCP/IP module in controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.738-744
• /
• 2018

This paper proposes a low cost hot swap operation circuit of a parallel operation power supply for servers. Hot swap function for server power system is essential in 24 hour operation system such as internet data center, server, factory and etc. Server power supplies used in internet data centers have two or more parallel operations with the hot swap operation. However, the cost of the power supply is high because the controller IC for hot swap operation is very expensive. Therefore, this paper proposes a parallel-operated power supply with a low-cost hot swap controller for servers. The proposed system can operate hot swap function by using discrete devices and reduce the cost by more than 50%. A 1.2kW prototype system is implemented to verify the proposed low cost hot swap controller.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.2
• /
• pp.62-68
• /
• 2015

Recently, LED is being used as various applications such as home lightings, work lightings and so on. EMI noise generated from LED driver have become a problem according to increase the use of LED. In this paper, Active EMI filter composed active and passive components is discribed as a method of solving a problem of EMI. The proposed filter is applied to the 160W LED load to verify performance experimentally. To compare the performance, We did an experiment using the proposed filter and the passive filter on the same 160W LED load and Driver System. As a result, The proposed Active EMI filter attenuated Conduction EMI noise better than any existing passive filter.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.491-494
• /
• 2008

과거 CDMA 시스템에서 이동단말과 PSTN 및 PSDN간의 통신이 가능하게 하기 위해서는 망간의 정합기능을 수행하는 연동장치(IWF Inter-Working Function)가 필요로 되는데, 이때 이동단말과 BSC/MSC간의 무선 데이터를 IWF로 HDLC 프레임 형태로 구동하고 반대로 IWF로부터 수신된 데이터 프레임을 이동 단말측으로 전달하기 위하여 HDLC frame driver의 역할이 필요하다. 또한 교환기와 IWF간의 데이터 통신은 Frame-relay 프로토콜을 이용하며 정합기능을 수행해 주어야 한다. 본 논문에서 구현된 기능은 과거 CDMA 의 MSC 내에 구현된 본 기능이 HDLC 정합, Frame-Relay 정합, IPC, Datapath 등의 기능들로 구분되어 분리되어 있는 구조를 통합하여 하나의 기능 Board로 통합하였고 이러한 기능을 MG(Media Gateway) System에 기반하여 구현하여 적용하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.798-806
• /
• 2001

As electronic industry and radio communication technologies progress, the electrical and electronic equipments are lightened, minimized, and operated by low power. At the same time, these equipments react sensitively by electromagnetic wave noise. It is a origine these equipments to wrong-operation. In this paper, we focused on the design and preperation condition of a advanced EMI filter. This filter sowed superior attenuation effect of 10 dB~20 dB compare with typical filter in the range of frequency from 150 kHz to 30 GHz and superior character over the variation of a load.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.939-942
• /
• 2018

최근 LED 조명을 활용한 가시광 통신(VLC: Visible Light Communications)기술이 주목을 받고 있다. 가시광 통신 기술은 Bluetooth, ZigBee 등과 함께 새로운 인터넷 접속 기술로 활용될 수 있으나 전송 용량의 한계 때문에 실제 적용이 힘든 상황이다. 본 논문에서는 이 문제를 해결하기 위해 키-값 데이터베이스 패러다임을 적용한 가시광 통신 기반의 사물인터넷(IoT: Internet of Things) 모델을 제시한다. 제안하는 IoT 환경은 플렛폼 서버, 게이트웨이, VLC 송신기 및 VLC 수신기로 구성된다. IoT 통신을 위한 각 장비의 기능 및 프로토콜 스텍을 설계하고 실험 환경에서 각 장치의 초기화 절차 및 데이터 전송 과정을 검증하였다. 실험결과, 각 장비의 초기 구동 시간을 포함하여 1분 이내에 VLC 기반의 IoT 환경 구축이 가능함을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.3
• /
• pp.223-230
• /
• 2017

A low-cost BLDC motor with hall sensor is used to drive the position control of a facility security monitoring system in this paper. Low measurable frequency of the hall sensor signal in low-speed regions results in difficulty in obtaining accurate speed detection and position control. To improve system control performance, we propose a variable gain of position controller and stop mode control scheme according to the motor speed and error position with pre-set deceleration time. The proposed stop mode control scheme is activated around the stop position to forcibly move the BLDC motor to the stop position in low speed. In the proposed stop mode, the motor current is controlled by the actual speed with the reference rotating angle. The control performance of the proposed position control is verified through experiments at the actual rail guided facility security monitoring system.