• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.4
• /
• pp.405-413
• /
• 2011

It was proposed that technologies derived from CAD-CAM and computed tomography may be useful for flapless implant treatment procedures. The aims of this study were to validate the reliability of this concept in a prospective 12-month clinical study. Twelve patients with fully edentulous areas in their mandibles were included in this study. A total of 71 implants were inserted in interforaminal regions by use of a CAD/CAM drill template($NobelGuide^{TM}$), specially designed for flapless implant surgery. To assess the degree of pain and discomfort, the patients were examined at 2 days and 1 week after surgery. Patient satisfaction and implant functionality were further evaluated at follow-up intervals of 1, 3, 6, and 12 months postoperatively. One implant failed early in 1 patient. All of the other implants were in a good functional state throughout the study. The mean marginal bone loss after 1 year of follow-up was 0.3 mm (SD, 0.1) at center, 0.5 mm (SD, 0.1) at canine and 0.7 mm (SD, 0.2) at distal fixtures, respectively. Statistically, there was not significant differences among each sites(P>.05)The mean ISQ change after 1 year of follow-up was -1.05 (SD, 2.76) at center, -0.85 (SD, 2.59) at canine and -1.27 (SD, 2.18) at distal fixtures, respectively. This prospective pilot study showed that the use of CAD/CAM technology and flapless implant surgery may be considered reliable for fully edentulous mandible of patients.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.255-265
• /
• 2009

Recently many studies have been published on application of immediate loaded implants. However, the immediate loading protocol has not been well documented. The purpose of the present study was to evaluate the stress distribution between bone-implant interfaces and the effect of implant length in the anterior maxilla using 3 dimensional finite element analyses. The diameter 4.0 mm threaded type implants with different length(8.5 mm, 10.0 mm, 11.5 mm, 13.0 mm, 15.0 mm) were used in this study. The bone quality of anterior maxillary bone block was assumed to D3 bone. Bone-implant interfaces of immediately loaded implant were constructed using a contact element for simulating the non osseointegration status. For simplification of all the processing procedures, all of the material assumed to be homogenous, isotropic, and linearly elastic. The 178 N of static force was applied on the middle of the palatoincisal line angle of the abutment with $120^{\circ}$ angle to the long axis of abutment. Maximum von Mises stress were concentrated on the labial cortical bone of the implant neck area, especially at the cortical-cancellous bone interfaces. Compared the different length, highest peak stress value was observed at the 8.5 mm implants and the results indicated a tendency towards favorable stress distribution on the bone, when the length was increased. Presence of cortical bone was very important to immediate loading, and it appears that implants of a length more than 13 mm are preferable for immediate loading at the anterior maxilla.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.157-161
• /
• 2004

The eyes, the saying goes, are the windows of the soul. It's the first thing you notice about a person. Therefore, many people want to possess beautiful eyelids. Surgical formation of a palpebral fold and sulcus divides the lid into two well-defined segments (palpebral and pretarsal), producing the double eyelid desired by many Oriental women as well as an increasing number of man recently. Upper lid blepharoplasty is the Oriental eye is one of the variations of standard upper lid blepharoplasty. In Oriental double eyelid surgery, there have been two approaches to form a superior palpebral fold: the buried suture(nonincision) method and the full external incision method. Conventionally, the nonincision technique has been shown to produce little postoperative edema. However, the probability of the fold disappearing is high, and this technique cannot be performed in patients with fatty eyelids. Conversely, the incision technique has contrary characteristics. Recently, partial incision(or semi-open) technique which is combination of mentioned methods is used, this technique is removal of pretarsal tissue, muscle, and/or orbital fat around 2 or 3 incision site to facilitate tarsus-dermal adhesion. Our method is on the basis of this technique, furthermore, compared with conventional semi-open method, Y(Yang's) needle assisted double eyelid operation is more easy, convenient, saving-time method and provide satisfactory results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.161-168
• /
• 2020

Failure of fixed implant supported prosthesis is caused by biomechanical factors such as excessive occlusal stress and biological factors such as bacterial infections and inflammation. Implants with severe bone resorption that have worsened without being resolved due to implant complications should be removed and then new treatments should be planned, taking into account remaining teeth, remaining implants, and residual alveolar. The patient of this case removed some of fixed implant prosthesis of mandible. The condition of the remaining alveolar bone was reassessed for further implant replacement and a few implants were placed. Then implant assisted removable partial denture (IAPRD) treatment is performed using implant surveyed bridge as abutment. Through this treatment, the clinical results were satisfactory on aspect of masticatory function recovery and oral hygiene management.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.30-34
• /
• 2020

Maxillectomy is performed to remove the tumor in the palate, maxillary sinus, buccal mucosa or nasal cavity. The resection range depends on the size and the extent of the tumor and it affects speech production or cause nasal regurgitation during feeding. Obturator can occlude an opening such as an oro-nasal fistula and protect the defect area. Successful reconstrucion of the patient's oral cavity who have gone over the maxillectomy is a difficult task. The condition and number of teeth, the remaining support area, and the extent of the defect area have a great influence on manufacturing the obturator. If these factors are disadvantageous, the prognosis of the prosthesis is uncertain. The final obturator must have a sufficient retention in the patient's oral cavity and must not irritate the surrounding tissue and support area where the resection was performed.In this case, a 55 year old female went through the maxillectomy and the only 3 teeth remained. And the retention of the maxillary prosthesis seems to be poor. So that, we fabricated the closed hollow obturator which has reduced weight compared to the conventional obturator. Consequently the closed hollow obturator can give better sealing and the adaptation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.192-203
• /
• 2007

This study histologically assessed the effect of topical alendronate application on periodontal healing in replanted teeth in fifty four SD Rats. Upper first molars in rat were extracted and replanted after dried during 15 minutes or 60 minutes in the air. In Group I, all teeth were replanted after 15 minutes of dry storage without any other treatment. In Group II and III, the pulps were removed and all teeth were replanted after soaking 10 min in Hank's balanced salt solution with/without alendronate, followed by 60 minutes of dry storage. the rats were sacrificed after 7, 15 and 30 days. The histological parameters studied were healed PDL, surface inflammatory and replacement resorption, and inflammatory severity. The following conclusions could be drawn from the present investigation. 1. Group I showed lower inflammatory root resorption and inflammation severity rate, compared to Group II and Group III. In Group I there showed effective for reattachment and regeneration of PDL. 2. In Group II, inflammatory root resorption were more severe and faster than other groups. There were extensive root resorption in the rats sacrificed after 30 days. 3 In Group III, there were localized inflammatory resorption in several areas, but extensive resorption did not occur Group III showed increase in root resorption rate, compared to Group I. However this difference was not statistically significant. 4. There were no difference between sacrificed days in replacement root resorption in all groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.246-250
• /
• 2000

The oral screen is a functional appliance, suitable for the treatment of developing malocclusion associated with aberrant muscular patterns. The better muscle balance between tongue and the buccinator mechanism can be established, and the reestablishment of normal growth and development can be achieved. The oral screen can be used for the correction of the following conditions : (1) thumbsucking, tongue thrusting and lip biting, (2) mouth breathing, (3) mild distocclusion with premaxillary protrusion, (4) open bites in deciduous and mixed dentition, and (5) incompetent lips. The patient should wear the oral screen every night and also during the day whenever possible. The effects of oral screen can be elevated through lip seal exercise : the lips should be kept in contact all the time to improve the lip seal. In the presented two cases, the patients were considered mouth breathers and to have incompetent lips, and one patient with maxillary incisal protrusion and the other with open bite. They were instructed to wear the oral screen with lip seal exercise. After wearing the appliance for 1 and 2 years respectively, mouth breathing was decreased and lip length and strength were increased, the maxillary incisors were retruded and open bite reduced.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.591-596
• /
• 2009

In the case of the impacted teeth, the clinician has to consider development of tooth, site of impaction, eruption path, and cooperation of patient. Treatment options for the management of impacted teeth are separated into four categories: observation, intervention, orthodontic or surgical relocation and extraction. Autotransplantation may be defined as the transplantation of embedded, impacted or erupted teeth, from one site to another in the same individual into extraction site or surgically prepared sockets. Autotransplantation ensures preservation of natural tooth, induction of alveolar bone growth and root development, offers one of the fastest and most economically feasible means in the replacement of young patients' missing teeth. This case presents a malpositioned impacted mandibular premolar of an 11-year-old girl. It was thought that orthodontic traction was difficult because of its unfavorable impacted position. Therefore the tooth was treated by autotransplantation, we can observe good healing pattern during 12 months.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.3
• /
• pp.209-215
• /
• 2013

Cleft lip and palate, the most common craniofacial anomalies, are severe congenital defects that have an incidence of 0.28 to 3.74 per 1000 live births. Although there has been great improvement in the field of cleft surgery, surgical approach cannot be the single solution to resolve the various problems encountered in patients with cleft lip and palate. The concept of presurgical infant orthopedics (PSIO) for gradual closure of the cleft gap and simplified surgical performance was first introduced by McNeil in 1950. Recently, there are many attempts not only to approximate the alveolar segments but also to reshape the nasal cartilage. Three infants with unilateral cleft lip and palate were referred from the department of Plastic Surgery for presurgical nasoalveolar molding (PNAM). Maxillary appliances using resin with orthodontic wire were fabricated. Then these appliance was applied until patients underwent lip surgery. In all cases, the patients could wear the appliance all day since they were able to eat even with the appliance on, This resulted in significant improvements in the nasal symmetry were found. Our appliance, namely K-NAM, extends the wearing time within the limited period and as a result it is expected to maximize the treatment effects. Used properly, this appliance would play a major role in enhancing nasal symmetry with satisfactory results.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.391-401
• /
• 2009

The successful outcome of dental implants is mainly the result of intial implant stability following placement. The aim of this study was to investigate the effect of a self-tapping blades and implant design on initial stability of two tapered implant systems in poor bone quality. The two different implant systems included one with self-tapping blades and one without self-tapping blades. D4 bone model using Solid Rigid Polyurethane Form was used to simulate poor bone densities. The insertion torque during implant placement was recorded. Resonance frequency Analysis (RFA), measured as the implant stability quotient (ISQ), was assessed immediately after insertion. Finally, the implant-bone specimen was transferred to an Universal Testing Machine to measure the axial pull-out force. Insertion torque values and maximum pull-out torque value of the non self-tapping implants were significantly higher than those in the self-tapping group (P = 0.008). No statistically differences were noted between the two implant designs in RFA. Within the each implant system, no correlation among insertion torque, maximum pull-out torque and RFA value could be determined. Higher insertion torque of the non-self-tapping implants appeared to confirm higher clinical initial stability. In conclusion, implants without self-tapping blades have higher initial stability than implants with self-tapping blades in poor bone quality.