• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.52-57
• /
• 2005

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.25-33
• /
• 2014

This study investigates the reliability of DSRC-based traffic information system on the typical urban arterial with the minimum sample size method. VISSIM has been employed to calculate the required sample size. After comparing the number of hi-pass vehicles recorded from DSRC and the required sample size, this study found that the interrupted traffic state tends to generate more outliers than the uninterrupted one, the lack of the number of vehicles completely passing links with multiple driveways makes it difficult to estimate the reliable traffic information, the traffic information during peak hour is relatively more reliable than that during off-peak hour, and the reliability of DSRC-based traffic information system depends on the significance level in calculating the sample size. The driveway density and traffic signal operation due to the individual link length significantly affects the required sample size, resulting in determining the reliability of the DSRC-based traffic information system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.7-14
• /
• 2012

We frequently confront with cars interfering into our lane on the ramp. We suffered from serious traffic congestion due to the interfering cars. But the police enforcement has not done actively because it's hard to enforce. In this study, we have evaluated the systems to enforce cutting-in cars through the field test. Generally, the image processing method depends on the weather. To overcome this limitation we proposed a new algorithm combined with section detection method. In the filed test we concluded the results as follows. Whereas the violation detection rate of the general image processing was 58.2%, a new algorithm proposed by this study was 74.5%. And, an error rate enforcing vehicles that do not violate was 0.0%. Also, we can use the existing facilities, such as street light because of compact and lightweight systems which are integrated camera with controller. Therefore, we concluded that it is possible to enforce the interfering Cars using vehicle enforcement systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.31-39
• /
• 2012

This study aims to suggest a methodology of localizing and calibrating parameters, such as acceleration, deceleration, and lane changing which are the basis of car following model in interrupted traffic flow to overcome the limitation of origin and destination based transportation simulation and to verify the application of activity-based model for use in Korean roadway condition in a large scale area or a city. Especially, we figured out that a proper cell size reflecting Korean traffic conditions is 1.0m rather than 7.5m which is default size and a methodology of tracking vehicle behavior characteristics through tracking vehicle ID is suggested on this study. In addition, vehicle running characteristics in real interrupted traffic flow is analyzed through subdividing vehicle types and updating vehicle type ratio. For verification of suggested model, some portion of Dalgubyul-ro in the Daegu city is tested, and the possibility of realization of interrupted traffic flow in simulation is studied.

• Transportation Technology and Policy
• /
• v.6 no.1
• /
• pp.178-184
• /
• 2009

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.35-45
• /
• 2005

The speed enforcement camera has been regarded as one of the most important safety countermeasures. Drivers decelerate in front of the speed enforcement camera and gain speed up after passing the camera. So there is a strong need to develop the method how to place the camera to overcome this problem. This study applied the concept of design consistency to the installation of the camera, so speed difference along the road sections should be controlled within the predetermined boundary. Specially, this study also regarded camera as the one of the elements of the road alignments which can change the speed of drivers abruptly, and suggested the way to put this concept into the selection of the placement of the camera.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.63-78
• /
• 2017

The purpose of this study is to determine the optimal aggregation interval to increase the reliability when estimating representative value of individual vehicle travel time collected by DSRC equipment in interrupted traffic flow section in National Highway. For this, we use the bimodal asymmetric distribution data, which is the distribution of the most representative individual vehicle travel time collected in the interrupted traffic flow section, and estimate the MSE(Mean Square Error) according to the variation of the aggregation interval of individual vehicle travel time, and determine the optimal aggregation interval. The estimation equation for the MSE estimation utilizes the maximum estimation error equation of t-distribution that can be used in asymmetric distribution. For the analysis of optimal aggregation interval size, the aggregation interval size of individual vehicle travel time was only 3 minutes or more apart from the aggregation interval size of 1-2 minutes in which the collection of data was normally lost due to the signal stop in the interrupted traffic flow section. The aggregation interval that causes the missing part in the data collection causes another error in the missing data correction process and is excluded. As a result, the optimal aggregation interval for the minimum MSE was 3~5 minutes. Considering both the efficiency of the system operation and the improvement of the reliability of calculation of the travel time, it is effective to operate the basic aggregation interval as 5 minutes as usual and to reduce the aggregation interval to 3 minutes in case of congestion.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.27-37
• /
• 2007

The automatic speed enforcement system is expected to play an important role as intelligent transport system (ITS) or advanced franc management system (ATMS). It must be a reliable system checking the overspeedy vehicles automatically, while savine the police manpower and ensuring a safe traffic flow. In terms of traffic engineering, the automatic speed enforcement system may serve to improve driver's violent behaviors, facilitate the smooth and safe traffic flow and thereby, reduce the traffic accident. This study was aimed at analyzing the accident before and after installation of the automatic speed enforcement systems at the frequency, EPDO(equivalent property damage only) and accident cost, analyzing the effects of the automatic system on the traffic flow and accident. As a result, when we equip the automatic speed enforcement system on the downward slope section or after middle section comparing with whole section. We should consider the location of automatic speed enforcement system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.374-388
• /
• 2016

In Jeju-Do, there is the 1100 Road, 516 Road, and Bijarimro, which are typical mountain sight-seeing roads in Jeju. These roads are local roads that have been the location for many traffic accidents. This study focused on these roads, categorized the type of traffic accident and analyzed the accident characteristics. The major accident factors were analyzed through trip AHP analysis, Comparative analysis of the velocity distribution and the factors affecting traffic accidents were analyzed. Tourists took many trips on these roads. The mixing rate of the rental cars was 36.70%~71.60% in 1100 road and Bijarimro. Currently, these local roads are regulated by a speed limit of 60km/h. However, it might be necessary to reduce the speed limit to 40km/h considering the geometric line form of the road and the climate in these areas. The speed limit of more than 40km/h is found 87.0% on 516 Roads, 88.57% on 1100 roads, and 93.1% on Bjarimro, In these roads, the speed ratio is higher as described above. Therefore, these roads have been found to have a higher risk of traffic accidents by overspeeding driving. The overspeed driving ratio of these roads was 87.0%~93.1%, The overspeed driving enforcement method at one spot has only the effect of reducing the speed at that enforcement place; the effect cannot be expected for the other places or sections. It is necessary to introduce a section overspeed driving enforcement system utilizing the average velocity in these areas to prevent traffic accidents.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.17-23
• /
• 2011

It has been presumed that the amount of vehicle's $CO_2$ emission would highly related to vehicle's cruising speeds on highways. In this study, it was tested if vehicle's $CO_2$ emissions would relate to the types of highways and the level of congestion. The results showed that the amount of $CO_2$ emission changes depending on (1) the vehicles' cruising speeds (b) congestion levels, and (c) the types of intersections. It was found that the vehicle acceleration and deceleration methods increases the amount of $CO_2$ emission up to 12%. It was also found that it changed up to 30% and 40% depending on the level of congestion and the types of intersections, respectively. The findings imply that the amount of $CO_2$ emission from vehicles should be improved when vehicles' cruising speeds are well managed through congestion management.