• The Journal of the Petrological Society of Korea
• /
• v.7 no.2
• /
• pp.132-145
• /
• 1998

The coal-bearing siliciclastic rocks of the Lower Permian Jangseong Formation, Samcheog coalfield, represent a megacyclothem which shows cyclic repetitions of sandstone, shale, coaly shale, and coals. Petrographic, geochemical, and SEM studies for sandstone samples, and XRD analysis for clay minerals were carried out to understand diagenesis in the sandstones of the Jangseong Formation. The Jangseong sandstones are composed of 60% quartz (mainly monocrystalline quartz) and 36% clay matrix and cement with minor amounts of feldspar, lithic fragments and accessory minerals (less than 4%). Jangseong sandstones are classified mostly as quartzwackes and partly as lithic graywackes according to the scheme of Dott(1964). The textural relationships between authigenic minerals and cements in thin sections and SEM photomicrographs suggest the paragenetic sequence as follows; (1) mechanical compaction, (2) cementation by quartz overgrowth, (3) formation of authigenic clay minerals (illite, kaolinite), (4) dissolution of framework grains and development of secondary porosity, and (5) later-stage pore-filling by pyrophyllite. We propose that these diagenetic processes might be due to organic-inorganic interaction between the dominant framework grains and the formation water. The Al, Si ions and organic acid, derived from dewatering of interbedded organic-rich shale and coals, were transported into the Jangseong sandstones. This caused changes in the chemistry of the formation water of the sandstones, and resulted in overgrowth of quartz and precipitation of authigenic clay minerals of kaolinite and illite. The secondary pores, produced during dissolution of clay and framework grains by organic acid and $CO_2$ gas, were conduit for silica-rich solution into the Jangseong sandstones and the influx of silica-rich solution produced the late-stage pyrophyllite after the expanse of kaolinite. The origin of the solution that formed pyrophyllite is not likely to be the organic-rich formation water based on the observation of fracture-filling pyrophyllite in the Jangseong sandstones, but the process of pyrophyllite pore-filling was indirectly related to organic-inorganic interaction.

• Economic and Environmental Geology
• /
• v.50 no.5
• /
• pp.375-387
• /
• 2017

Amphibolite-hosted Fe-Ti mineralization at the Soyeonpyeong Island, located in central western part of the Korean Peninsula is a typical orthomagmatic Fe-Ti oxide deposit in South Korea. The amphibolite intruded into NW-SE trending Precambrian metasedimentary rocks. Lower amphibolite is characterized by igneous layering, consisting of feldspar-dominant and amphibole-Fe-Ti oxide-dominant layers. The igneous layering shows complicated and/or sharp contact. In contrast, upper amphibolite has a more complicated lithofacies (garnet-bearing, coarser, and schistose), and massive Fe-Ti oxide ore alternates with schistose amphibolite. NS- and EW-trending fault systems lead to redistribute upper amphibolite-hosted Fe-Ti orebody and igneous layering of lower amphibolite, respectively. The whole-rock compositions of amphibolite and Fe-Ti oxide ore reflect their constituent minerals. Amphibolite shows significantly positive Eu anomalies whereas Fe-Ti oxide ore has weak negative Eu anomalies. Plagioclase (Andesine to oligoclase) and Fe-Ti oxide minerals have constant composition regardless of their distribution. Amphibole has a compositionally variable but it doesn't reflect the chemical evolution. Mineral compositions within individual layers and successive layers are relatively constant not showing any stratigraphic evolution. This suggests that there are no successive injections of Fe-rich magma or assimilation with Fe-rich country rocks. Contrasting Eu anomalies between amphibolite and Fe-Ti oxide ore also suggest that extensive plagioclase fractionation during early crystallization stage cause increase in $Fe_2O_3/FeO$ ratio and overall Fe contents in the residual magma. Thus, Fe-rich residual liquids may migrate at the upper amphibolite by filter pressing mechanism and then produce sheeted massive Fe-Ti mineralization during late fractional crystallization.

• Journal of the Korean Data and Information Science Society
• /
• v.11 no.1
• /
• pp.65-72
• /
• 2000

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi parameter design has a great deal of advantages but it also has some disadvantages. The various research efforts aimed at developing alternative methods. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. (1990) and studied by others. In this paper we make a comparative study on optimization procedures to robust design in the two different experimental design(product array, combined array) approaches the Mough the Monte Carlo simulation.

• Journal of Korea Game Society
• /
• v.10 no.4
• /
• pp.81-90
• /
• 2010

In this paper, an efficient method is proposed to produce photorealistic images of woven fabrics without empirical data such as the measured BRDFs(bidirectional reflectance distribution functions). The proposed method is applicable both to ray tracer based offline renderers and to realtime applications such as games. The proposed method models the reflectance properties of woven fabric with alternating anisotropy and deformed MDF(microfacet distribution function). The procedural modeling of the yarn structure effectively and efficiently reproduces plausible rendering of woven fabric. The experimental results show the proposed method can be successfully applied to photorealistic rendering of diverse woven fabric materials even in interactive applications.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.638-641
• /
• 2008

Computational investigation was conducted to study the effects of the shape parameter of shroud on the performance of the outdoor unit of an air-conditioners. For this study the Design of Experiment(4-factor 3-level) was created and the an automatic program was composed using VBA to reduce the load of pre-process for CFD. The estimated mathematical equation was produced from this analysis and it was found that the gap between fan and shroud affects more heavily than the other parameters. As a result, the composition of the best parameters was verified that its flow rate was increased by 10 percents and sound pressure level was reduced by 1.2 dBA compare with the worst. And finally, a kind of Propeller fan with blades which were attached to the shroud, so-called 'ProBeller Fan' was introduced in this study.

• Communications for Statistical Applications and Methods
• /
• v.15 no.4
• /
• pp.497-507
• /
• 2008

Confounding techniques have to be used repeatedly in the situations where it is necessary to perform only 2 runs under homogeneous conditions in $2^m$ factorial and fractional factorial experiment. Combinations of confounded $2^m$ factorial and fractional factorial designs enable the estimation of all main effects and all of or a part of 2 factor interaction effects. Defining contrast are used for our designs and treatment combinations of designs to be run are presented.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.69-77
• /
• 1989

Until recently post-processing of finite element model has been heavily relied on expensive graphic peripheral devices. With the aid of inexpensive microcomputers, very economical post-processor graphics program called MICRO-POST has been developed. Model geometry or results of analysis for the unlimited meshes can be easily presented in a number of low-cost graphic devices. The paper presents the procedure obtaining the device-independent graphics, and the structure and functions of the program. It also describes efficient I/O scheme to overcome the memory limitation, and dialogue-type input technique to control the plot operation in an interactive manner. Through the post processing examples for the general purpose finite element programs, it demonstrates the usefulness of the program.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1263-1270
• /
• 2010

Sixty patients were divided into three groups. Each group of twenty persons had fed on different diet foods over 5 weeks. Cholesterol had been measured repeatedly five times at an interval of a week during 5 weeks. It resulted from mixed model analysis of repeated measurements data that homogeneous toeplitz covariance matrix pattern was selected as the optimal covariance pattern. The correlations between measurements of different times for the covariance matrix are somewhat highly correlated as 0.64-0.78. Based upon the homogeneous toeplitz covariance pattern model, the time effect was found to be highly significant, but the treatment effect and treatment-time interaction effect were found to be insignificant.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.379-384
• /
• 2021

With people's continuous research and exploration in the field of artificial intelligence, more relatively mature artificial intelligence technology is applied in people's daily life. Mirrors are the most commonly used daily necessities in life, and it should be applied to artificial intelligence. The research results of this paper show that the smart mirror designed based on the raspberry pi displays weather, temperature, greetings, and has a human-mirror interaction function. The research method of this paper uses the Raspberry pi 3B + as the core controller and Google Assistant as the intelligent control. When connected to the network via Raspberry Pi's own WiFi, the mirror can automatically display and update time, weather and news information features. You can wake up the Google Assistant using keywords, then control the mirror to play music, remind the time, It implements the function of smart mirror voice interaction. Also, all the hardware used in this study is modular assembly. Later, it is convenient for user to assemble by himself later. It is suitable for market promotion at an affordable price.

• Design Convergence Study
• /
• v.16 no.6
• /
• pp.153-167
• /
• 2017

Nowadays, as many robots are developed for desktop, users interact with the robots based on speech. However, due to technical limitations related to speech-based interaction, an alternative is needed. We designed this research to design a robot that interacts with the user by using unconditional reflection of biological signals. In order to apply bio-signals to robots more effectively, we evaluated the robots' overall service evaluation, perceived intelligence, appropriateness, trustworthy, and sociability according to the degree of the robot's embodiment level and the response speed of the robot. The result showed that in terms of intelligence and appropriateness, 3D robot with higher embodiment level was more positively evaluated than 2D robot with lower embodiment level. Also, the robot with faster response rate was evaluated more favorably in overall service evaluation, intelligence, appropriateness, trustworthy, and sociability than the robot with slower response rate. In addition, in service evaluation, trustworthy, and sociability, there were interaction effects according to the robot's embodiment level and the response speed.