• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.996-1003
• /
• 2007

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.57-67
• /
• 2000

Two fuzzy travel time estimators for interrupted traffic flow were developed based on field survey data and simulation data 7hat is collected from DETSIM, which is microscopic traffic simulation model that car-following theory is applied. One is FETTOS(Fuzzy Estimator of Travel Time using Occupancy and Spot speed) and the other is FETTOS(Fuzzy Estimator of Travel Speed using Volume and Occupancy). Fuzzy logic controller was applied to the estimators to deal with non-linear relationship between traffic variables and travel time. According to results of simulation and field survey. estimation of travel time can be modeled by using percent occupancy better than any other traffic variables. Detector location from storyline and signal timing Plan of intersection are affected to estimate travel time. With a few findings, the estimator was constructed and its performance was tested for observed travel time data and simulated data. FETTOS which needs signal timing plan and detector location estimates travel time with accurate better than FETSVO does. However. FETSVO has excellent transferability because the estimator needs set of input data only; volume and time mean speed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.225-227
• /
• 2012

해상교통안전진단제도의 시행으로, 해상교통에 영향을 미칠 가능성이 있는 모든 건설 사업은 필히 선박운항자 관점에서 그 안전성을 검토하여야 한다. 진단제도의 정량적 평가항목 중에, 선박이 장애물이나 위험지역과의 충돌확률을 평가하는 근접도 평가항목이 있는데, 이는 항로상의 어떤 단면에서의 선박 궤적 분포가 정규 분포를 한다는 가정에 근거하고 있다. 한편, 진단제도의 또 하나의 정량적 평가기법중 하나인 해상교통류 시뮬레이션에서는, 대상 선박들의 예상 항차수로부터 선박을 통계적으로 발생시키는 기법을 사용하는데, 여기에서는 항로상의 특정 지점을 연속해서 통과하는 선박들의 시간 간격이 Poisson 분포를 따른다는 가정을 사용한다. 본 논문에서는 이러한 기본적인 가정들이 적합한지를 고찰하기 위하여, 광양 및 인천항에서 실측한 해상교통현황 조사 결과를 분석하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.3 s.26
• /
• pp.211-218
• /
• 2006

Recently, many ships such as fishing boats, cargo ships, high speed ferry boats are visiting Mokpo harbor. In particular, many marine accidents have been occurred at this area due to the narrow channel, a thick fog, the existing of the shallow waters etc. However there is no suitable ships' routeing system which takes account of today's traffic situations in this area. This study aims at the settling of hazardous factors to mitigate the danger to vessels in Mokpo harbor and to secure the safety of maritime environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.175-176
• /
• 2020

시뮬레이션 기반의 해상교통 분석 방법은 대상 항만의 항적 데이터를 이용하여 교통 특성 모델을 구축하고, 이를 통해 해상교통 현상을 재현함으로써 분석을 수행하는 방법이다. 교통 특성 모델은 교통 현상을 수치적으로 표현한 일반화 된 모형을 말하며, 모델링 작업에 많은 시간과 노력이 소요된다. 본 논문에서는 해상 교통 특성을 생성하기 위한 자동화 된 프로세스를 제안하며, 실제 목포항의 항적 데이터에 적용하여 교통특성 정보 생성 방법으로서의 활용 가능성을 검토하였다.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.191-201
• /
• 2008

It has been employed TRANSYT-7F and NETSIM to evaluate the validity and effectiveness of improvement on TSM(Transportation Systems Management). But T7F is hard to describe platoon compression and dispersion in actually, and NETSIM takes a long time for network coding, calibration and have difficulty in setting up saturation flow. While Shockwave Model have advantage which can describe platoon compression and dispersion in actually and shorten hours, convenience of application. But Shockwave Model apply unrealistic traffic flow relation ship(U-K curve) and simplify platoon because of difficulty in calculating shockwave's position and cross. For solving limitation of existing shockwave models, It develop new model with 2-regime linear model, New platoon model, Extended shockwave, etc. For verifying the validity of the proposed model, it was compared with delay of T7F and NETSIM by offset variation. In conclusion, it is thought that proposed model have outstanding performance to simulate traffic phenomenon.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.79-87
• /
• 2007

The interchanges of urban freeways have many problems with traffic operation due to high off-ramp flows and frequent congestion at adjacent intersections. The flow exiting from off-ramps is affected by the operational status and traffic volume conditions of the nearest signalized intersection. As a result, off-ramp flow cannot exit and the queue backs up the freeway mainline when queues from the signalized intersection form up to the junction of the off-ramp and street. The spacing between an off-ramp and an adjacent intersection is likely to determine the traffic conditions at the adjacent intersection. However, the current design guidelines do not consider such a factor. This study is to develop a model calculating the spacing between off-ramps and adjacent intersections considering the signal, traffic, and road conditions. The variables affecting the model in this study are effective green time (g/C), volume-capacity ratio (v/c), the number of lanes, and off-ramp volume. Various scenarios are designed to represent the effects of the variables and the road networks are constructed using VISSIM, which is a common traffic micro-simulation software package. The queue length is derived from VISSIM and this length is considered as the recommended spacing between the off-ramp and the adjacent intersection. Through the simulation analysis, regression models are developed to calculate the queue length reflecting the various conditions such as signals, traffic, and road configurations. The developed model can be used to create road design guidelines to determine the location of off-ramps in the planning stage.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.169-177
• /
• 2009

In this paper, the rotated hexagonal lattice model (RHLM) was proposed, which is applied to pedestrian flow, and developed the simulation model for the pedestrian counterflow. RHLM is an upgrade version of the square lattice model(SLM) and hexagonal lattice model(HLM). The simulation was performed at the hexagonal lattice $20{\times}20$ and evaluated by different speed, density and flow conditions. Simulation results are compared with SLM and show that RHLM can replicate the characteristics of pedestrian traffic more effectively and reliably than any other existing models from several perspectives. First, RHLM can explain the shortest-path movement of pedestrians and more realistic avoidance motion. If they cannot move straight direction, they can move shorter distance from previous position to destination. Second, RHLM reflects the characteristics that the pedestrian can move with higher capacity and the speed of pedestrian flow is hard to zero.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.11-16
• /
• 2010

Various researches have been performed on the topic of pedestrian traffic flow. At the beginning, the modeling and simulation method for the vehicular traffic flow was simply applied to pedestrian traffic flow. Recently, CA based simulation models are frequently applied to pedestrian flow analysis. Initially, the square Lattice Model is a base model for applying to pedestrians of counterflow and then Hexagonal Lattice Model improves its network as a hexagonal cell for more realistic movement of the avoidance of pedestrian conflicts. However these lattice models express only one directional movement because they express only one directional movement. In this paper, MLPM (the Multi-Layer Pedestrian Model) is suggested to give various origins and destinations for more realistic pedestrian motion in some place.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.87-92
• /
• 2013

This study is to analyze the impacts of different High-Pass lane speed limits. Paramics, microscopic simulation software, was used to perform microscopic simulations. For the simulations, Incheon toll gate traffic count data was used. The Paramics simulation results show that higher High-Pass speed limit (70Km/h) produced better traffic flow condition and less air pollution cost compared to existing High-Pass speed limit (30Km/h).