• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.23-31
• /
• 2012

The objective of this study is to develop the design criteria of traffic island considering pedestrian level of service (LOS). In pursuing the above, this study gives particular emphasis to suggesting the minimum design space of traffic island in order to maintain pedestrian LOS C and D, and the critical pedestrian traffic volume that reflects the intersection geometry (2 lanes per direction) through the simulation analysis. The main results are as follows. First, the spaces of 160 traffic islands, which meet the pedestrian LOS C and D and reflects the pedestrian traffic volume by signal cycle, are drawn by using a commercial simulator VISSIM. The relevant spaces of traffic island in terms of both the pedestrian LOS and the pedestrian traffic volume are evaluated to range from $3.0m^2$ to $41m^2$. Second, the critical pedestrian traffic volume for the operation of traffic island is evaluated to be 1,000-1,300 person/hour at LOS C and 1,600-1,800 person/hour at LOS D, respectively, when a cycle of 120-150 seconds were applied to a intersection with two lanes per direction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.1-2
• /
• 2019

일반적인 해상교통 분석 방법은 대상 항만의 항적 데이터를 기반으로 데이터를 추출한 후 모델을 구축하며, 구축된 모델을 바탕으로 해상교통 현상을 재현하고 있지만, 이러한 방법은 항로 혹은 통항량 변동 등의 변화에 따른 교통류를 예측할 수 없어 그 활용에 제약이 많다. 본 논문에서는 기존의 해상교통 분석 사례를 통해 교통 특성 모델의 요소를 식별하고, 이를 동적인 해상교통 환경을 시뮬레이션 할 수 있는 에이전트 기반의 교통류 생성 기술 개발의 기초 자료로 활용하고자 한다.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.121-128
• /
• 2009

This study has proposed the signal operating system to use both semi-actuated signal control and pedestrian push-button as a way to make up for the problems of 3 leg intersections which are operated inefficiently in the signal operation, one of the methods of traffic operations. In case of the semi-actuated signal control, it can reduce delay inside the intersection by serving to uncongested traffic on the main road where there is not much traffic volume on the secondary road and push-button signal can reduce unnecessary waiting time it could happen to vehicles by operating it though there is no pedestrian. Quantitative analysis was tried regarding the average delay reduction per vehicle using VISSIM, microscopic simulation program regarding how much effect it has compared with the existing signal control system and semi-actuated signal control system when the above two advantages are collected. The field test was performed for one three-leg intersection of Incheon. According to respectively signal control method pedestrian traffic changed and executed a sensitivity analysis. The result which compares the average delay time per a vehicle of scenarios, the signal control method of using the pedestrian push-button system in comparison with the fixed signal control method showed to decrease effect of a minimum 3.7 second (10%), a maximum 5.8 second (16%). When the pedestrian traffic volume was 20% or less of the measurement traffic volume, The signal control method of using the pedestrian push-button system appeared to be more efficient the semi-actuated signal control with object intersection.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.65-71
• /
• 2011

It is practically hard to measure vehicle fuel consumption required to evaluate the energy-related governmental policies and traffic management strategies; the existing methods are too simplified due to the limited field data available. Existing methods are even unable to reflect the amount of fuel consumed when vehicles accelerate and decelerate, and such technical limitations have reduced the quality of the policy evaluation. This study proposes a new fuel consumption model that simultaneously considers the effects of both cruising speed and acceleration/deceleration of vehicles. A new fuel consumption model was developed based on the simulation data generated by AVL Cruise, a vehicle simulation program. The estimated by the proposed model was compared against the one from the existing method. Comparison results showed that the proposed model provided much reliable estimate (fuel consumption) than the other did.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.377-393
• /
• 2016

Vehicle emissions have been known as a critical factor to give a negative impact on the public health. In particular, particulate matters(PM) and NOx are highly related with respiratory diseases such as asthma. This study aimed at analyzing spatio-temporal patterns of PM and NOx generated from urban freeway traffic. MOVES, which is a well-known emission analysis tool presented by US Environmental Protection Agency(EPA), was applied to estimate PM and NOx based on traffic volume and speed data obtained from Seoul Outer Ring Expressway during January~June, 2012. K-means clustering analysis was used for categorizing the Level of Vehicle Emissions(LOVE) to support more systematical identification of the significance of emissions. Then, spatio-temporal analyses of estimated emissions were conducted by LOVE. Finally, this study proposed a set of strategies to reduce both PM and NOx to enhance public health based on analysis results.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.175-181
• /
• 2012

Under unsaturated capacity conditions with balanced approach flows, roundabout gives less delay and queue length than existing signalized intersections; however, over capacity conditions with unbalanced approach flows(flow above 450 pcu/h/lane), roundabouts efficiency drops due to the short gap between entering vehicles and circulating vehicles. This study provides a roundabout Signal Metering transfer standard and operation method. In this study, a four-way-approach with one-lane roundabout is selected to compare the Signal Metering performance for the case of unbalanced flow conditions. The performance is evaluated by using SIDRA software in terms of average delay and queue length. The result shows that the Signal Metering provides substantial improvements for the case of total approach flow is 1,800~2,000 pcu/h in which the main approach flow ratio is 60~70% gives 30~40% less delay and 30~60% less queue length than normal roundabout operation. Also, it is approved that operational performance saving can be achieved when the Metered Approach is selected adjoining to the main approach in pair.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.21-32
• /
• 2007

The households to be surveyed are usually huge number at the level of a city or metropolitan survey, not to mention a nationwide travel survey. Therefore, household travel surveys to figure out true origin-destination (O/D) trip patterns (population O/D) are conducted through a sampling method rather than by surveying all of the population in the system. Therefore, the population O/D pattern can only be estimated by expanding the sampled O/D patterns to the population. It is very difficult to avoid the errors involved in the process of sampling, surveying and expanding O/D data. In order to minimize such errors while estimating the true O/D patterns of the population, the validation and adjustment process should employed by doing a comparison between the expanded sample O/D data and observed link traffic volumes. This study suggests a method of validation and adjustment of the expanded sample O/D data by comparing observed link volumes at several screenlines. The study also suggests a practical technique to modify O/D pairs which are excluded in the screenline validation process by comparing observed traffic volume with the results of traffic assignment analysis. An empirical study was also conducted as an example applying the suggested methods of validation and adjustment with Korea's nationwide O/D data and highway network.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.119-128
• /
• 2021

The most typical method to generate traffic information is installing vehicle detectors and collecting various traffic variables. The information collection accuracy of a vehicle detector affects the reliability of the generated traffic information. The most universal vehicle detector is an image detector. This study installed a magnetic detector in the same position as an image detector and evaluated the accuracy of traffic volume and speed data depending on a variety of environment. Based on the evaluation, more errors occurred as the image detector was placed farther from the camera, whereas more errors were found to occur during the night rather than the day. Although rainfall did not affect the collection of traffic volume, it negatively affected speed data collection. Therefore, an analysis of the camera's view angle and its optimization depending on the camera installation position and height are required to enhance the currently operated image detector performance. It is judged that a separate performance evaluation criterion should be prepared in a bad weather environment.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.157-167
• /
• 2009

This study deals with the turn penalty functions in the urban transportation demand forecasting. The objectives are to develop the penalty functions of left-turn traffic in the case of signalized intersections, and to analyze the applicability of the functions to the traffic assignment models. This is based on the background that the existing models can not effectively account for the delays of left-turn traffic which is bigger than that of through traffic. In pursuing the above, this study gives particular attention to developing the penalty functions based on the degrees of saturation by simulation results of Transyt-7F, and analyzing the applicability of the functions by the case study of Cheongju. The major findings are the followings. First, two penalty functions developed according to the degrees of saturation, are evaluated to be all statistically significant. Second, the results that the above functions apply to the Cheongju network, are analyzed to be converging, though the iteration numbers increase. Third, the link volumes forecasted by turn penalty functions are evaluated to be better fitted to the observed data than those by the existing models. Finally, the differences of traffic volumes assigned by two functions, which are exponential and divided forms, are analyzed to be very small.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2003

In these days, public transportation has become important because of serious traffic congestion. But. there are few researches in public transportation compared with researches in auto. Accordingly, the purpose of paper is development of transit assignment model, which considers features of public transportation, time table, transfer capacity of vehicle, common line, etc. The transit assignment model developed in this paper is composed of two parts. One part is search for optimum path, the other part is network loading. A Genetic algorithm has been developed in order to search for alternative shortest path set. After the shortest paths have been obtained in the genetic algorithm, Logit-base stochastic loading model has been used to obtain the assigned volumes.