• Proceedings of the KSEEG Conference
• /
• 2007.04a
• /
• pp.415-417
• /
• 2007

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.343-348
• /
• 2010

Gravity anomalies observed in shipborne survey are usually distorted by bad weather conditions and unexpected vessel movement. These distorted data should be removed because they may mislead the data interpretation. However, it is not possible to perfectly remove all erroneous data. Cross-over point correction, which is generally used, only reduces the errors at cross-over points, and thus the data still contain error values. To resolve this drawback, Rauch-Tung-Striebel(RTS) filter was adopted to minimize all errors in the data and at cross-over points. After applying this method, the range of anomaly variation is reduced from 15 mGal to less than 2 mGal, and errors at the cross-over points are minimized from 4.21 mGal to 2.95 mGal. The results imply that RTS filter is very useful to reduce errors in the data and corss-over points.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.219-223
• /
• 2008

Many cross-over errors due to position errors, meter errors, observation errors, sea conditions and so on occur when marine geophysical data collected by own and other agencies are merged, and these errors can create artificial anomalies which cause an improper interpretation. Many methods have been introduced to reduce cross-over errors. However, most methods are designed to compare each point or segment data to find cross-over points, and require a long processing time. Therefore, FORTRAN program (FastXcorr) is presented to fast determine cross-over points using an overlap-sector, and to adjust cross-over errors using a weighted linear interpolation algorithm.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.229-234
• /
• 2006

Cross-over errors (XOEs) may mislead scientists when interpreting marine geophysical data. Such risk can be reduced by correcting the data proportionally between two cross-over points (XOPs). C program is presented to determine XOPs using a quick rejection test and a straddle test, and to adjust XOEs using a weighted linear interpolation algorithm.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.270-274
• /
• 2009

한반도의 정밀관측을 목적으로 개발된 KOMPSAT-2위성의 영상을 활용하기 위해서는 촬영 시 발생하는 기하학적 왜곡의 보정이 필요하다. 본 연구에서는 지상기준점(Ground Control Point: GCP) 선택의 세 가지 특성을 각각 적용하여 기하보정을 하였다. 보정 영상의 정확도 검정을 위하여 수치지도(digital map)를 이용한 평균제곱근오차(Root Mean Square Error: RMSE)와 육안검사를 통해 정확도를 비교하였다. 그 결과 영상의 중앙은 선형 교차점을 선택한 방법이 가장 정확하였고, 가장자리는 건물의 모서리 또는 건물의 중심을 선택한 방법이 우수하였다.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.260-272
• /
• 2000

In this paper, we propose a simple auto calibration method for a CCD camera with wide an91e lens that causes high degree of distortion. We formulate a cubic warping equation for the relationship between the cross points on the distorted calibration target and the corresponding points from the standard grid image, and calibrate distorted images using the computed parameters. The experiment has been performed with the distorted images resulted from wide angle CCD camera. The experimental results show that the proposed method, in terms of the average and maximum distorted error, has higher accuracy than the existing methods because of maintaining the calibration ratio more than 95 percent. The proposed method is applicable to wide variety of images regardless a type of lens or distortion.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.1
• /
• pp.79-85
• /
• 2015

According to the growing use of the personal GPS in the mobile device recently, the LBS (Local bases service), which processes and refines the GPS information, such as a position-tracking service, a public safety service, a local based information service, has increased steadily. Due to the refraction or reflection of GPS, however, it is impossible to use GPS around or in buildings. Therefore, it is necessary to correct the errors of GPS. We propose the method which corrects the errors of GPS and creates the refined trajectory using intersection region indexing. After analyzing the trajectory, receiving trajectories from many people and identifying the similarity between of trajectories, we will recommend the favorite route and useful information such as restaurant, convenience store, bus station and emergency call service.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.11-19
• /
• 2016

Two representative residual static methods of traveltime decomposition and stack-power maximization are discussed in terms of application to land seismic data. For the model data with synthetic shot/receiver statics (time shift) applied and random noises added, continuities of reflection event are much improved by stack-power maximization method, resulting the derived time-shifts approximately equal to the synthetic statics. Optimal parameters (maximum allowable shift, correlation window, iteration number) for residual statics are effectively chosen with diagnostic displays of CSP (common shot point) stack and CRP (common receiver point) stack as well as CMP gather. In addition to removal of long-wavelength time shift by refraction statics, prior to residual statics, processing steps of f-k filter, predictive deconvolution and time variant spectral whitening are employed to attenuate noises and thereby to minimize the error during the correlation process. The reflectors including horizontal layer of reservoir are more clearly shown in the variable-density section through repicking the velocities after residual statics and inverse NMO correction.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.545-548
• /
• 2008

본 논문은 지도정보를 이용하여 옥내측위 결과를 보정하는 방법을 제안한다. 다양한 옥내측위 관련 연구 결과가 소개되었으나, 지금까지 발표되고 진행되는 연구는 측위의 정확도를 제고하는 방안에 중점을 두고 있다. 그러나 정확도를 아무리 제고하여도 오차를 완전히 제거하기는 불가능하다. 따라서 본 연구는 지도정보를 이용하여 옥내측위 결과를 보정하는 방법을 제안하는 것이다. GPS로 예측한 자동차 궤적을 보정하는 방법으로 map-matching 방법이 널리 연구되었다. 제안하는 방법은 두 선분이 교차하는지 검사하는 함수를 이용하여, 이동단말기가 장애물을 통과하여 움직이는 상황을 나타내는 측위 결과를 실시간으로 즉시 보정한다는 점에서 map-matching 방법과 다르다. 제안하는 실시간 보정 방법은 기존의 map-matching 방법과 함께 측위의 정확도를 제고하기 위하여 사용될 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.469-479
• /
• 2014

N-RTK(Network based RTK) methods are able to improve the accuracy of GNSS positioning results through modelling of the distance-dependent error sources(i.e. primarily the ionospheric and tropospheric delays and orbit errors). In this study, the comparison of the TTFF(Time-To-Fix-First ambiguity), accuracy and discrepancies in horizontal/vertical components of N-RTK methods(VRS and FKP) with the static GNSS at 20 Unified Control Stations covering Incheon metropolitan city area during solar storms(Solar cycle 24 period) were performed. The results showed that the best method, compared with the statics GNSS survey, is the VRS, followed by the FKP, but vertical components of both VRS and FKP were approximately two times bigger than horizontal components. The reason for this is considered as the ionospheric scintillation because of irregularities in electron density, and the tropospheric scintillation because of fluctuations on the refractive index take the place. When the TTFF at each station for each technique used, VRS gave shorter initialization time than FKP. The possible reasons for this result might be the inherent differences in principles, errors in characteristics of different correction networks, interpolating errors of FKP parameters according to the non-linear variation of the dispersive and non-dispersive errors at rover when considering both domestic mobile communication infra and the standardized high-compact data format for N-RTK. Also, those test results revealed degradation of positing accuracy, long initialization time, and sudden re-initialization, but more failures to resolve ambiguity during space weather events caused by Sunspot activity and solar flares.