• Korean journal of applied entomology
• /
• v.23 no.2 s.59
• /
• pp.89-95
• /
• 1984

Sixty isolates of Dendrophoma obscurans isolated from 19 important strawberry growing areas of Korea were tested in vitro for resistance to thiophanate-methyl and iprodione. Naturally-occurring thiophanate-methyl-resistant isolates were about 43 percents of isolates tested, whereas iprodione-resistant isolates were 10 percents. All these resistant isolates except SU 1 and SU 2, which were highly resistant to thiophanate-methyl, showed a week level of resistance. Iprodione-resistant isolates were readily obtained in vitro, when mycelial disk of the fungus was incubated on PDA media containing iprodione at the concentrations of $1{\mu}g/ml\;and\;10{\mu}g/ml$, but no thiophanate-methyl-resistant isolate from the mycelia with or without UV irradiation. All these artificially-obtained iprodione-resistant isolates were showed a high degree of resistance. On the strawberry leaves, thiophanate-methyl and iprodione were no longer effective to all resistant isolates at the recommended concentration, and the protective value to highly resistant isolates was much less than that of weakly resistant isolates. Isolates resistant to thiophanate-methyl were also resistant to benomyl but iprodione-resistant isolates did not show cross-resistance to thiophanate-methyl, benomyl, captan and zineb. Captan controlled both thiophanate methyl-resistant and iprodione-resistant isolates as effectively as sensitive isolates.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.161-167
• /
• 2014

This study was conducted to investigate the resistance of Botrytis cinerea to azoxystrobin, which belongs to strobilurin fungicides. The sensitivity of B. cinerea isolates, which were collected from infected pepper, strawberry, cucumber and tomato by a single spore isolation, to the fungicide was tested through a agar dilution method on PDA amended with fungicides and $100{\mu}g\;mL^{-1}$ of salicylhydroxamic acid (SHAM). All isolates of B. cinerea tested in this study were classified as a sensitive and a resistant group by $1.0{\mu}g\;mL^{-1}$ of $EC_{50}$ value to azoxystrobin. While the sensitive isolates accounted for 46.5% of B. cinerea population, the resistant ones did for 53.5%. According to the regions isolating B. cinerea, the highest isolation frequency was showed as 81.1% in Chungnam among the all. Among 4 host plants as pepper, strawberry, cucumber and tomato, the highest isolation frequency was obtained in strawberry, while the lowest was done in pepper. The isolate resistant to azoxystrobin showed the cross resistance to other fungicides included into strobilurins as kresoxim-methyl and trifloxystrobin. In spite of an excellent efficacy of strobilurins, it should be taken care to use them in the field, because of the high risk in the fields.

• Research in Plant Disease
• /
• v.9 no.4
• /
• pp.224-228
• /
• 2003

Five commercial chemicals, Dimethomorph, Foseyl-Al, Oxadixyl + Mancozeb, Propamocarb hydrochloride, and Metalaxyl, were tested for control of tobacco black shank (Phytophthora nicotianae) and/or delaying buildup of the resistant population to Metalaxyl which has been used for control of the disease in Korean tobacco farms. Propamocarb hydrochloride seemed to have a cross-resistance to the Metalaxyl resistant isolates showing similar response with Metalaxyl in vitro. Meanwhile, Dimethomorph+Mancozeb and Oxadixyl+Mancozeb were selected to be the promising chemicals which are able to be alternative to Metalaxyl for the black shank control in accordance with in vitro and in field trial.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.217-224
• /
• 2013

We developed a time-lapse inversion using new cross-model constraints based on change ratio and resolution of model parameters. The cross-model constraint based on change ratio imposes the same penalty on the model parameters with equal change ratio. This constraint can emphasize the model parameters with significant change regardless of their increase or decrease. The resolution cross-model constraint imposes a small penalty on the model parameters with poor resolution, but a large penalty on the model parameters with good resolution. Thus, the model parameter with poor resolution can be effectively identified in the inversion result if they are significantly changed with time. Through the numerical tests for 3D resistivity monitoring data sets, the performance of these two cross-model constraints was confirmed. Finally, for the safety estimation of a sea dyke, we applied the developed time-lapse inversion to the 3D resistivity monitoring data that were acquired at a sea dike located in western coastal area of Korea. The result of time-lapse inversion suggested that there were no significant changes at the sea dike during the monitoring period.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.507-522
• /
• 2021

Specific survey objectives often cannot be met using only one geophysical method, as each method's results are influenced by the specific physical properties of subsurface materials. In particular, areas susceptible to geological hazards require investigation using more than one method in order to reduce risks to life and property. Instead of analyzing the results from each method separately, this work develops a four-quadrant criterion for classifying areas of levees as safe or weak. The assessment is based on statistically determined thresholds of seismic velocity (P-wave velocity from seismic refraction and S-wave velocity from multichannel analysis of surface waves) and electrical resistivity. Thresholds are determined by subtracting the standard deviation from the mean during performance testing of this correlation technique applied to model data of four horizontal and inclined fracture zones. Compared with results from the crossplot of resistivity and P-wave velocity, crossplot analysis using resistivity and S-wave velocity data provides more reliable information on the soil type, ground stiffness, and lithological characteristics of the levee system. A loose and sandy zone (represented by low S-wave velocity and high resistivity) falling within the second quadrant is interpreted to be a weak zone. This interpretation is well supported by the N values from standard penetrating test for the central core.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.115-123
• /
• 2011

This study was conducted to investigate the early-age behavior and performance of precast pavements constructed by replacing existing asphalt pavements for an intersection in urban bus only lanes. The monitoring items included level differences between asphalt pavement and precast panels at the beginning and ending locations of the precast pavement, level differences and joint widths between precast panels, precast panel settlement, and skid resistance of the panel surface. At a certain time after the construction, the diamond grinding method was applied and its effect was also investigated. The monitoring results showed that as time went by, the panel level, joint width, settlement, and skid resistance were not much varied. That implied the stable sustaining of external loads by the precast pavements. In addition, it was verified that employing diamond grinding could reduce the level differences between precast panels.

• Research in Plant Disease
• /
• v.26 no.2
• /
• pp.61-71
• /
• 2020

With 32 fungicides, it was examined the inhibitory effects on the mycelial growth of Alternaria dauci KACC42997 causing Alternaria leaf blight of carrot. Showing the results of the agar dilution method, the fungicides belonging to C2, C5, G1, E2, and E3 group were excellent in inhibiting mycelial growth. Protective fungicides belonging to M group, except for iminoctadine tris-albesilate, and pyraclostrobin belonging to C3 group were effective in inhibiting spore germination of pathogens. The fungicides included into C2 group inhibiting succinate dehydrogenase activity and the G1 group inhibiting demethylase activity showed the excellent inhibitory effect on mycelial growth but the inhibitory effect of spore germination was very low. However, fluazinam belonging to C5 group was excellent in inhibiting spore germination as well as mycelial growth. Especially, when 100 ㎍/ml of fluxapyroxad belonging to the C2 group was treated, 47.1% of spore formation was inhibited on the medium. In comparison of the resistance factors of 3 fungicide groups, as G, C, and E group, in populations of A. dauci isolates collected from Gumi, Pyeongchang, and Jeju, resistance factor in the population of Jeju was the lowest. However, two isolates resistant to fludioxonil belonging to E2 group were found in the isolate group of Pyeongchang, and both showed cross-resistance to iprodione and procymidone.

• The Korean Journal of Pesticide Science
• /
• v.13 no.2
• /
• pp.105-110
• /
• 2009

In 2008, a number of 110 isolates of Colletotrichum gloeosporioides were obtained from infected twigs of persimmon (Diospyros kaki) collected at Sangju and four fungicides (carbendazim, thiophanate-methyl, mancozeb, and propineb) were evaluated to determine their growth effect on fungicide-medium. Among them, the mycelial growth of 68.2 and 35.5% of isolates was inhibited over 91% in response to carbendazim ($415{\mu}g/m{\ell}$) and thiophanate-methyl ($750{\mu}g/m{\ell}$), respectively, compared to untreated control and the correlation between the two benzimidazole fungicides was higher ($r^2=0.7886$). Moreover, in responses to mancozeb ($1,500{\mu}g/m{\ell}$) and propineb ($1,500{\mu}g/m{\ell}$), the inhibition of mycelial growth of 90% and 53.6% of isolates was inhibited over 91%, respectively. But correlation between theses two fungicides was lower ($r^2=0.0174$). There is no cross-resistance response between benzimidazole funficides and mancozeb / propineb.

• Journal of the Korean earth science society
• /
• v.42 no.1
• /
• pp.76-87
• /
• 2021

In this study, temporal trend of researches in earthquake with groundwater level, water quality, radon, remote sensing, electrical resistivity, gravity, and geomagnetism was searched from 2001 to 2020, using the journals indexed in Web of Science, and the number of articles published in international journals was counted in relation to the occurrences of earthquakes (≥Mw 5.0, ≥Mw 6.0, ≥Mw 7.0, ≥Mw 8.0, and ≥Mw 9.0). The number of articles shows an increasing trend over the studied period. This is explained by that studies on earthquake precursor and seismic monitoring becomes active in various fields with integrated data analysis through the development of remote sensing technology, progress of measurement equipment, and big data. According to Mann-Kendall and Sen's tests, gravity-related articles exhibit an increasing trend of 1.30 articles/yr, radon-related articles (0.60 articles/yr), groundwater-related articles (0.70 articles/yr), electrical resistivity-related articles (0.25 articles/yr), and remote-sensing-related articles (0.67 articles/yr). By cross-correlation analysis of the number of articles in each field with removing trend effect and the number of earthquakes of ≥Mw 5.0, ≥Mw 6.0, ≥Mw 7.0, ≥Mw 8.0, and ≥Mw 9.0, radon and remote sensing fields exhibit a high cross-correlation with a delay time of one year. In addition, large-scale earthquakes such as the 2004 and 2005 Sumatra earthquake, the 2008 Sichuan earthquake, the 2010 Haiti earthquake, and the 2010 Chile earthquake are estimated to be related with the increase in the number of articles in the corresponding periods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.469-474
• /
• 1996

Alloy 690은 응력부식 균열에 대한 저항성이 요구되는 원자력 발전소 증기발생기 전열관 재료에 사용되고 있다$^{(1)}$ . 응력부식 균열에 대한 저항성은 주로 결정입계에 존재하는 크롬탄화물의 기여에 의한 것이 대부분이다. 크롬탄화 석출물의 핵생성을 알아보기 위해서 110$0^{\circ}C$에서 용체화처리를 0, 1, 3, 10분 동안 하여 관찰하였다. 용체화처리한 모든 시편에서 결정입계에 존재하는 석출물의 분포는 쌍정과 교차하면서 갑자기 변화하는 것을 관찰 할 수 있다. 이처럼 석출물이 존재하지 않는 결정입계들은 대부분 낮은 ∑ 값의 CLS으로부터 약간 벗어난 입계가 될 것이다. 결정입계에 존재하는 석출물은 기지와 Cube-Cube orientation relationship을 갖는다. 그리고 단지 하나의 결정입과 반정합을 이룬다. 기지와 반정합을 이루는 석출물은 M$_{23}$ C$_{6}$형태의 크롬 탄화물이고 격자상수는 기지의 격자상수보다 3배 크다.