• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.600-605
• /
• 1998

체내방사능 측정시스템의 교정인자는 측정결과에 주요한 요인으로 작용한다. 교정인자는 특정 집단으로부터 표준체위와 표준장기를 도출, 이를 기초로 하여 제작한 펜텀으로부터 구하는 것이 일반적인 방법이다. 그러나 팬텀의 기하학적 구조 및 내부장기의 형상은 특정 집단에 따라 다르므로 이로 인한 측정오차가 발생할 수 있다. 따라서 본 연구에서는 북아메리카 성인남성의 표준자료에 근거하여 제작된 LLNL 팬텀과 일본성인 남성의 표준자료에 근거하여 제작된 JAERI 팬텀을 한국원자럭연구소 폐 카운터를 이용하여 상호비교.분석하였다. 이와 함께 LLNL 팬텀으로 교정된 폐 카운터의 성능시험을 JAERI 팬텀으로 DOELAP 성능시험범주 I, II, III 및 IV에 대해 수행하여 편텀의 구조 및 형상으로부터 발생하는 측정오차를 분석하였다. 비교.분석결과 1.7 cm ~ 3.7 cm 근육등가 가슴벽두께 범위내에서 JAERI 팬텀에 의한 교정인자가 전반적으로 LLNL 팬텀의 것보다 다소 높은 수치를 보였으나 허용수준이었고, 성능시험결과 상대편중은 DOELAP 성능 용인 기준을 만족하였다. 결국 두 팬텀간의 측정오차는 측정 및 체내피폭선량 평가시 수반되는 오차와 비교해 보면 그다지 크지 않은 것으로 결론지울 수 있다. 따라서 LLNL 펜텀으로부터 구한 교정인자를 국내 성인남성의 일상 모니터링에 사용할 경우 측정결과가 다소 과대평가되기는 하나 허용수준으로서 큰 문제가 없는 것으로 나타났다.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.11a
• /
• pp.136-137
• /
• 2009

• Journal of Radiation Protection and Research
• /
• v.22 no.1
• /
• pp.29-33
• /
• 1997

Neutron room scattering corrections that should be made when neutron detectors are calibrated with a $D_2O$ moderated $^{252}Cf$ neutron source in the center of a calibration room are considered. Such room scattering corrections are dependent on specific neutron source type, detector type, calibration distance, and calibration room configuration. Room scattering corrections for the responses of a thermoluminescence dosimeter and two different types of spherical detectors to neutron source in the Radiation Calibration Laboratory(RCL) neutron calibration facility at the Korea Atomic Energy Research Institute(KAERI) were experimentally determined and are presented. The measured room scattering results are then compared with theoretical results calculated by predicting room scattering effects in terms of parameters related to the specific configuration. Agreement between measured and calculated scattering correction is generally about 10% for three kinds of detectors in the calibration facility.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.31-37
• /
• 2018

In the surface contamination test using the end-window Geiger-Muller type counter, the wrap is used as a method for protecting the detector exposed to the outside in order to measure the beta-rays. We analyze the effect of this method on the measurement rate and the correction factor, and wanted to make it clear to radiation workers that excessive use of the wrap can affect the measured value of the beta-rays. The experimental method was to compare and analyze the change of the beta-rays measurement counting rate and the calibration factor according to the wrap thickness using the beta-rays with different energy of 3 KBq, 1.5 KBq and 0.3 KBq. The subjects of this study were the end-window Geiger-Muller type counter which were held at the calibration center certified by Korea Laboratory Accreditation Scheme (KOLAS) in March 2012, Cl-36 (Chlorine) and Sr-90 (Strontium) were used as the source of beta radiation. The measurement counting rate decreased with increasing wrap thickness, and the calibration factor increased with increasing wrap thickness. Since the changes of the measurement counting rate and the calibration factors can reduce the accuracy of the instrument readings, but also have a significant impact on detector contamination and damage, so there is a need to find out what thickness of wrap is most effective. If we using a wraps with thickness that show a low rate of change of the measurement counting rate and the calibration factor, it will protect the detector and minimize the effect on the measured value of the beta-rays.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.198-199
• /
• 2011

• Journal of Radiation Protection and Research
• /
• v.18 no.2
• /
• pp.71-79
• /
• 1993

Form the pure Maxwellian distribution(kT= 1.42MeV), the effects upon calibration factors of encapsulating a $^{252}Cf$ spontaneous fission neutron source were investigated to establish a standard neutron field in the Secondary Standard Dosimetry Laboratory at Korea Atomic Energy Research Institute(KAERI). A Monte Carlo code MCNP was used in simulating the encapsulation SR-Cf-100 and SR-Cf-1273 to be real conditions. The anisotropy(FI) and fluence-to-dose equivalents conversion factors$(H/{\Phi})$ were evaluated and compared with other results. As the results, the FI was determined to be 1.061 at ${\theta}=90^{\circ}$ with ${\pm}0.2%$ statistical error and the $(H/{\Phi})$ was evaluated to be $333.9 [pSv\;cm^2]\;with\;{\pm}0.5%$ statistical error, which is lower by 1.8% than that recommended by the ISO 8529. This means physically that the neutron spectrum of the unmoderated $^{252}Cf$ source in KAERI is a little more softened than that by the ISO.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.79-85
• /
• 2017

As the number of patients suffering from Pes Planus increases, research on a correctional insole that can cope with them is increasingly required. Therefore, the design of an insole for Pes Planus Correction was studied using the superelastic effect, which is one of the characteristics of the shape memory alloy in this paper. To design an effective insole, the effect of the contact pressure induced by the insole on the plantar fascia, which is the most important muscle in the foot structure, was evaluated. Three parameters (thickness, max. height and asymmetric ratio) were set as the main design factors of the insole, and the maximum contact pressure appearing on the plantar fascia was calculated by finite element analysis and analyzed using the Taguchi method. As a result of the analysis, it was confirmed that the contact pressure was influenced in the order of max. height, thickness, and asymmetric ratio. In addition, the contact pressure was converted to a feeling pressure that could be felt by a person, and then a safety correction range was established that would not cause any irritation to the plantar fascias, even though the correction effect could be expected. This indicates the best design for the safety correction range. The design method considering the important factors established through this study can form the basis for designing a personalized correctional insole in the future.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.60
• /
• pp.3-10
• /
• 2006

한국의 전파연구소와 일본의 정보통신연구기구는 휴대전화와 같은 이동통신기기로부터 방사되는 전자파가 인체에 흡수되는 에너지 정도를 측정하는 전자파 흡수율(SAR) 평가에 대한 오차 연구를 공동으로 수행하고 있다. 본 논문에서는 동종의 SAR 시스템에서 프로브, 교정용 도파관 및 기준 다이폴 안테나를 상호 교체하여 교정하여 프로브의 교정인자를 구하고 유효성 검사를 통하여 교정 오차를 검증하였다. 프로브 교정에 대한 상호 오차는 0.2 dB 이하의 결과를 얻었으며, 유효성 오차는 최대 0.28 dB를 얻었다. 그러나 SAR 외삽 알고리즘이 다를 경우는 최대 0.48 dB의 상대 오차를 보였다.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.04a
• /
• pp.212-213
• /
• 2009

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.405-412
• /
• 2020

The thermistor mount is used for precise RF power measurement because the calibration factor is constant according to the change of power. The calibration factor of the standard mount can be measured with an uncertainty less than 0.5 % from the 10 MHz to 1 GHz by direct comparison with the transfer standard using the DC substitution method. Recently, as the supply of precision power meter based on DC substitution method allows simple and fast measurement, a simple direct comparison measurement system with the same level uncertainty was designed and the minimum required specifications of components through analysis of mismatch error was proposed. The uncertainty was evaluated for system validation, and the results show that uncertainties have been well maintained within 0.5 % in the measurement frequencies.