• Title/Summary/Keyword: 교반 온도

Search Result 365, Processing Time 0.026 seconds

A Study on Synthesis of Potassium Sulfate used Sodium Sulfate and Potassium Chloride (황산나트륨과 염화칼륨을 사용한 황산칼륨 제조 연구)

  • Kim, Nam-Il;Kim, Tae-Yeon;Chu, Yong-Sik
    • Resources Recycling
    • /
    • v.30 no.1
    • /
    • pp.35-43
    • /
    • 2021
  • In this study, Na2SO4 and KCl reagents were used to synthesize K2SO4 as a basic study for recycling byproducts generated during the manufacture of steel and cement. The mole ratio of Na2SO4 to KCl, the saturation of the solution, and the stirring temperature were controlled to derive the optimal manufacturing conditions. The microstructure and crystallinity of the materials prepared were evaluated using scanning electron microscopy and X-ray diffraction analysis. Pure K2SO4 was obtained when the mole ratio of Na2SO4 to KCl was 1:6-18, the saturation of the solution was less than 160%, and the stirring temperature was 20℃, 50℃. The optimal manufacturing conditions to maximize the crystallinity and yield of K2SO4 while minimizing the energy consumption were 1:6 mole ratio of Na2SO4 to KCl, 140% saturation of the solution, and 20℃ stirring temperature.

이트륨 옥살레이트의 반응성 결정화 및 열분해 특성 연구

  • 최인식;성민혁;김운수;김우식;김용욱
    • Proceedings of the Korea Association of Crystal Growth Conference
    • /
    • 1997.10a
    • /
    • pp.51-55
    • /
    • 1997
  • 이트륨 옥살레이트 결정화에 있어서 반응물의 농도, 반응 온도, 반응물의 주입속도 변화등의 반응조건(reaction condition)의 변화와 반응기 내에서의 교반속도와 같은 hydrodynamic condition의 변화가 생성된 옥살레이트 결정의 입자크기, 결정형태등에 미치는 영향을 체계적으로 관찰하였다. 그리고 agglomeration의 영향에 의한 particle의 크기변화에 있어 생성물의 과포화는 agglomerates를 결정 짓는 가장 중요한 변수이다. 또한 반응성 결정화에 의해서 얻어진 Yttrium Oxalate가 온도 변화에 따라서 Yttrium Oxide로 열분해되는 온도구간과 결정구조의 변화 및 분자 구조의 변화를 관찰하여 최종의 Yttrium Oxide가 생성되는 것을 확인하였다.

  • PDF

Surface coating and characterizations of non-swelling property mica (비팽윤성 운모의 표면코팅 및 특성평가)

  • Park, Ra-Young;Seok, Jeong-Won;Park, Sun-Min;Kim, Pan-Chae
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.18 no.3
    • /
    • pp.131-135
    • /
    • 2008
  • This study is to establish the coating technique for synthetic mica and to prepare synthetic mica with the non-aqueous property. The surface coating of synthetic mica is prepared with stearic acid using the high speed stirrer. The characterizations for mica powders coated the stearic acid are carried out by the deposition test, XRD and SEM. The results of research could be coated the stearic acid on the mica by 1600 rpm/min at $70^{\circ}C$ for 10 min. From the observation of SEM was found that the non-aqueous property mica could obtained by mixture ratios for stearic acid and mica, the inner temperature and rotation speed of the stirrer but treated time be unrelated.

Solubility and Yield Characteristics of KCl in Cement By-Pass Dust (시멘트 바이패스 더스트에 존재하는 염화칼륨의 용해 및 수득 특성)

  • Yun, Youngmin;Jeong, Jaehyun;Chu, Yongsik
    • Resources Recycling
    • /
    • v.25 no.3
    • /
    • pp.43-48
    • /
    • 2016
  • Cement manufacturing plant uses various kinds of industrial/municipal waste. The waste contains considerable amount of potassium, chlorine and small amount of heavy metal. Many researches were performed to fabricate valuable resources from the waste. In this study, various methods, which dissolves and crystallizes potassium/chlorine to extract potassium chloride, were experimented. Especially amount of water, slurry temperature, and stirring time were controlled. Then kind of heavy metal and content of potassium chloride were analyzed. The yield of potassium chloride increased, as the amount of water for slurry increased but it increased slightly, when the water content was over 200%. The yield tended to increase, when the temperature of slurry was over a certain point. The yield did not increase in case of over 10 minutes stirring time. The kind and content of heavy metal in potassium chloride were various according to stirring time. The main heavy metals were Pb, Cu, and $Cr^{6+}$.

The Recovery of Silver from Thiourea Leaching Solution by Cementation Technique (침전법을 이용한 Thiourea 용출용액으로부터 Silver 회수)

  • Kim, Bong-Ju;Cho, Kang-Hee;Choi, Nag-Choul;Park, Cheon-Young
    • Economic and Environmental Geology
    • /
    • v.46 no.1
    • /
    • pp.29-37
    • /
    • 2013
  • In order to apply the silver cementation method using Fe powder from pregnant thiourea leaching solution. Parameters such as the amount of Fe powder addition, agitation speed, and temperature were investigated. The silver cementation rate was increased by the increasing of Fe powder addition, agitation speed, and temperature. The highest silver cementation rate was found when the addition of Fe powder was 50 g/L at the agitation speed of 500 rpm. The silver cementation rate increase with increasing temperature according to the Arrhenius equation and obeys $1^{st}$ order kinetics. The activation energy from the kinetics data was found to be between 13.73 KJ/mol and 17.02 KJ/mol. In the XRD analysis, goethite was detected in the precipitate of the thiourea leach solution. This indicates that an oxidation-reduction reaction had occurred in the thiourea solution due to the addition of the Fe powder.

A basic study on the defiberation of waste newspaper (폐지의 해섬에 관한 연구)

  • 윤태환;김형석;조동성
    • Resources Recycling
    • /
    • v.4 no.1
    • /
    • pp.31-37
    • /
    • 1995
  • This study was to investigate the effects oi agitation speed, pulp concentration, ion concentration ill the slurry solution, printed area of the waste newspaper, immerwng time and the temperature on the defiberation process for the waste newspaper. The defikration efficiency at 50% is twice that of 16%. The efficiency is improved as two times according to elevate the agtation speed as two times in the range of 200-2WO r.p.m.. Defiberation with NaOH 1X10-'M solution has higher efficiency than that of NaOH 1 x 1 0 - M solution as 3 times at the conditions of 16%, 1200 r.p.m, and 1% pulp concentration The temperature of immersing salut~on aifects on the efficiency more than immersing time does. Increasing the printed area of newspaper decreases the velocity of defiberation. The alkaline solution is effective to defiberate and the defiberation efficiency at the same dosage of alkalinity is in the order a1 NaOH) KOH) Na,SiO, ) Na,CO, ) Ca(OH)2.

  • PDF

Improvement of surface defects by pre-treatment process capability upgrade in plating process (도금공정 전처리 성능개선을 통한 표면결함 개선)

  • O, Min-Yeong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.11a
    • /
    • pp.193-193
    • /
    • 2015
  • 도금공정에 있어서 전처리는 제품품질을 확보하는데 중요한 단계이다. 전처리 공정의 주요인자중 처리액의 온도, 처리시간, 교반력, 오염도를 개선함으로써 제품의 산화막 및 오염물질을 효과적으로 제거할 수 있었다.

  • PDF

징케이트처리시 아연입자의 핵 생성 및 성장거동과 초음파 교반 도입에 따른 아연입자의 Morphology 변화에 대한 연구

  • 이성기;진정기;김영호;이재호
    • Proceedings of the International Microelectronics And Packaging Society Conference
    • /
    • 2001.11a
    • /
    • pp.185-188
    • /
    • 2001
  • 본 연구는 알루미늄 기판 위에 징케이트 처리 시 생성되는 아연 입자들의 성장거동에 관하여 연구하였다. 알루미늄 기판 상에서 아연입자들은 기판 표면의 요철 꼭지점이나 모서리에서 먼저 생성되었고, (0001)면들이 적층되어 성장하였다. 또한 온도를 증가에 따른 성장속도를 증가시켜 징케이트 처리를 실시하였을 때 육방정계을 갖는 아연 입자의 경우 <1100> 결정방향으로 성장이 이루어져 불가사리 형태의 입자형태를 나타내었으며 초음파 교반에 의한 징케이트 처리를 하였을 경우 조밀하고 균일한 아연 막을 형성하였다.

  • PDF

Evaluation of Air Quality in the Compost Pilot Plant with Livestock Manure by Operation Types (축분 퇴비화시스템 운용방식에 따른 실내 대기오염 평가)

  • Kim, K.Y.;Choi, H.L.;Ko, H.J.;Kim, C.N.
    • Journal of Animal Science and Technology
    • /
    • v.46 no.2
    • /
    • pp.283-294
    • /
    • 2004
  • Air quality in the livestock waste compost pilot plant at the Colligate Livestock Station was assessed to quantity the emissions of aerial contaminants and evaluate the degree of correlation between them for different operation strategies; with the ventilation types and agitation of compost pile, in this study. The parameters analyzed to reflect the level of air quality in the livestock waste compost pilot plant were the gaseous contaminants; ammonia, hydrogen sulfide, and odor concentration, the particulate contaminants; inhalable dust and respirable dust, and the biological contaminants; total airborne bacteria and fungi. The mean concentrations of ammonia, hydrogen sulfide, and odor concentration in the compost pilot plant without agitation were 2.45ppm, 19.96ppb, and 15.8 when it was naturally ventilated, and 7.61ppm, 31.36ppb, and 30.2 when mechanically ventilated. Those with agitation were 5.50ppm, 14.69ppb, and 46.4 when naturally ventilated, and 30.12ppm, 39.91ppb, and 205.5 when mechanically ventilated. The mean concentrations of inhalable and respirable dust in the compost pilot plant without agitation were 368.6${\mu}g$/$m^3$ and 96.0${\mu}g$/$m^3$ with natural ventilation, and 283.9${\mu}g$/$m^3$ and 119.5${\mu}g$/$m^3$ with mechanical ventilation. They were also observed with agitation to 208.7${\mu}g$/$m^3$ and 139.8${\mu}g$/$m^3$ with natural ventilation, and 209.2${\mu}g$/$m^3$ and 131.7${\mu}g$/$m^3$ with mechanical ventilation. Averaged concentrations of total airborne bacteria and fungi in the compost pilot plant without agitation were observed to 28,673cfu/$m^3$ and 22,507cfu/$m^3$ with natural ventilation, and 7,462cfu/$m^3$ and 3,228cfu/$m^3$ with mechanical ventilation. They were also observed with agitation to 19,592cfu/$m^3$ and 26,376cfu/$m^3$ with the natural ventilation, and 18,645cfu/$m^3$ and 24,581cfu/$m^3$ with the mechanical ventilation. It showed that the emission rates of gaseous pollutants, such as ammonia, hydrogen sulfide, and odor concentration, in the compost pilot plant operated with the mechanical ventilation and with the agitation of compost pile were higher than those with the natural ventilation and without the agitation. While the concentrations of inhalable dust and total airborne bacteria in the compost pilot plant with the natural ventilation and with the agitation, the concentrations of respirable dust and total airborne fungi in the compost pilot plant with the mechanical ventilation and agitation were higher than those with the natural ventilation and without the agitation of compost pile. It was statistically proved that indoor temperature and relative humidity affected the release of particulates and biological pollutants, and ammonia and hydrogen sulfide were believed primary malodorous compounds emitted from the compost pilot plant.

Isolation and Characteristics of Denitrifying Pseudomonas CW4 (탈질균 Pseudomonas CW4의 분리 및 특성)

  • Hwang, Seon-Hyeon;Lee, Yeong-Ho;Jo, Mu-Hwan
    • KSBB Journal
    • /
    • v.14 no.5
    • /
    • pp.616-620
    • /
    • 1999
  • Ten denitrifying bacteria, which were identified as Pseudomonas sp., were isolated from Winogradsky columns. The most effective denitrifying bacterium was named as Pseudomonas CW4, which was cultivated at anoxic condition. The optimal growth temperature and pH were 3$0^{\circ}C$ and 6-8, respectively. The effect of carbon concentration and agitator speed on the rate of denitrification were very low. 100% of NO$_3$-N was removed after 15 hrs when initial concentration of NO$_3$-N was 142.5 mg/L.

  • PDF