• Title/Summary/Keyword: 교류임피던스

Search Result 119, Processing Time 0.04 seconds

A.C.impedance properties on $RuO_2$-based thick film resistors ($RuO_2$계 후막저항체의 교류 임피던스 특성)

  • 구본급;김호기
    • Electrical & Electronic Materials
    • /
    • v.3 no.4
    • /
    • pp.315-324
    • /
    • 1990
  • 저저항(DuPont 1721, 100.OMEGA./sq.)과 고저항(1741, 10K.OMEGA./sq.)의 두 Ru계 후막저항체를 여러 조건에서 소결하여 소결막의 복소임피던스 특성과 임피던스의 주파수의존성을 1KHz-13MHz의 주파수 범위에서 조사하였다. 저저항 1721계의 경우 600.deg.C이상에서 소결한 모든 시편이 거의 저항성분(R)만으로 구성된 등가회로에 해당되는 복소임피던스 거동을 보였으며 임피던스에 미치는 주파수 의존성은 크게 나타나지 않았는데 5KHz까지는 주파수에 따라 변화가 없다가 그 이상의 주파수에서 주파수 증가에 따라 약간씩 증가하였다. 고저항 1741 후막저항체의 경우는 소결조건에 따라 복소임피던스 거동과 임피던스에 미치는 주파수 의존성이 달리 나타났다. 600.deg.C에서는 용량(C) 성분만으로 구성된 등가회로에 해당하는 복소임피던스 거동을 얻었고 주파수 증가에 따라 임피던스가 직선적으로 감소하였으며 700.deg.C이상 900.deg.C까지는 저항(R)과 용량(C)이 병렬로 연결되는 형태의 등가회로에 해당하는 복소임피던스 거동을 얻었고 이때의 임피던스의 주파수 의존성은 저주파수 영역에서는 임피던스가 주파수에 변함없이 일정하다가 5KHz이상의 주파수에서는 주파수 증가에 따라 임피던스가 직선적으로 감소하였다. 1000.deg.C반응에서의 복소임피던스 거동은 RCL성분이 병렬로 연결된 형태의 등가회로에 해당되는 결과를 얻었으며 임피던스도 작아지고 주차수 의존성도 현저하지 않았다.

  • PDF

AC Impedance Study of Oxygen Electrode in Phosphoric Acid Fuel Cell (교류 임피던스법에 의한 인산형 연료전지의 산소전극 특성 연구)

  • Song Rak-Hyun;Kim Chang-Soo;Shin Dong-Ryul
    • Journal of the Korean Electrochemical Society
    • /
    • v.3 no.4
    • /
    • pp.191-195
    • /
    • 2000
  • Electrochemical properties of the oxygen electrode in phosphoric acid fuel cell have been studied using AC impedance method as a function of applied potential, operating temperature and teflon content in the electrode. The oxygen electrode reaction in the $105wt.\%$ phosphoric acid is characterized by a parallel resistive component, $R_p$ and a capacitive component, $C_p$ with serial electrolyte resistance, $R_s$. The conductivity of the phosphoric acid is found to be 0.31-0.47 S/cm in the range of $130\;to\;190^{\circ}C$ from the measured impedance. The increase of applied potential and temperature produced the decreased RP and the increased $C_p$, which means the increase of the oxygen electrode reaction rate. The single cells with the cathode of various teflon contents were tested, and the cathode with $40wt.\%$ teflon showed good performance, which is considered to be related to an optimized impedance behavior.

Effects of Ac Mutual Coupling According to Location of Auxiliary Electrodes In Measuring the Ground Impedance of Vertically or Horizontally Buried Ground Electrode (수직 또는 수평으로 매설된 접지전극의 접지임피던스 측정시 보조전극 위치에 따른 전자유도의 영향)

  • Choi, Young-Chul;Choi, Jong-Hyuk;Lee, Bok-Hee;Jeon, Duk-Kyu
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.23 no.8
    • /
    • pp.86-92
    • /
    • 2009
  • In order to minimize ac mutual coupling, the auxiliary electrode are located at a right angle in measuring ground impedance. In case that the measurement space is limited, the alternative method is employed. At that time, it is necessary to investigate the measurement errors due to ac mutual coupling and earth mutual resistance in measuring the ground impedances. 'This paper presents the measurement accuracy according to the location of the current and potential auxiliary electrodes in measuring ground impedance of vertically or horizontally buried ground electrode. The measurement errors due to ac mutual coupling were evaluated Consequently, the effect of ac mutual coupling on the measurement accuracy for horizontally buried ground electrode is greater than that for vertically buried ground electrode. Measurement errors due to ac mutual coupling is the largest when the current and potential auxiliary electrodes are located in parallel. The 61.8[%] rule is inappropriate in measuring ground measurement. Theoretically, in case that the angle between the current and potential auxiliary electrodes is 90$[^{\circ}]$, there is no ac mutual coupling. If it is not possible to route the current and potential auxiliary electrodes at a right angle with limitation of measurement space, the location of these electrodes with an obtuse angle is preferred to that with an acute angle in reducing the measurement errors due to ac mutual coupling.

Characterization of a SOFC using impedance spectroscopy and current voltage behavior analysis

  • An, Jin-Su;Park, Yeong-Min;Bae, Hong-Yeol;Song, Jeong-Hun
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2012.05a
    • /
    • pp.70.2-70.2
    • /
    • 2012
  • 고체산화물연료전지의 전기적 성능은 직류를 인가하면서 평형 전위로 부터 과전압(Overpotential) 만큼 멀어지는 셀의 전극 전위를 측정하는 방법으로 분석할 수 있다. 하지만 이러한 직류 상태에서는 측정 시스템에 대해서 얻을 수 있는 정보가 매우 제한 적이다. 따라서 활성화 과전압 (Activation overpotential), 농도 과전압(Concentration overpotential), 저항 과전압 (Ohmic overpotential)등의 전류에 따른 변화가 전기화학의 법칙을 충실히 따른다는 가정하에 측정결과를 수식에 맞추어 역으로 추정하는 회귀 분석 방법이 많이 사용되고 있다. 하지만 고성능의 셀이 될 수록 활성화 분극이나 농도 분극이 전류-전압 선상에서 뚜렷하게 나타나지 않는 경우가 많고, 이러한 상태에서의 회귀 분석은 해는 무한히 많으나 하나의 해 만을 선택하게 되는 경우가 있는 것이 사실이다. 이러한 문제점은 연료전지에 직류와 교류를 동시에 인가하면서 과전압과 임피던스를 상호 비교 분석하면서 보완될 수 있다. 따라서 본 연구에서는 고체산화물연료전지의 직류 인가 상태에서 각 과전압을 간단한 수식을 이용한 회귀 분석으로 추정하고, 이를 다시 임피던스 측정 시 교류 주파수에 따라 나뉜 저항 요소들과 다시 비교하면서 회귀 분석의 신뢰성을 높이는 시도를 하였다. 이러한 과정을 통해 제시된 직류 고전압 모델을 검증하는데 임피던스의 이용이 매우 효과적임을 알 수 있었다.

  • PDF

Study of the Stability of Brass Coated on Steel Cords with pH and Applied Constant Potential Changes in Aqueous Solutions by AC Impedance Measurements (교류임피던스 측정에 의한 수용액에서 pH와 일정공급전위 변화에 따른 강철심에 도금된 놋쇠의 안정성 연구)

  • Ko, Young Chun;Chung, Keun Ho
    • Analytical Science and Technology
    • /
    • v.8 no.3
    • /
    • pp.293-298
    • /
    • 1995
  • The stability of brass coated on steel cords with pH and applied constant potential changes in aqueous solution has been investigated by AC impedance measurements. In solutions of the constant pH, as a applied constant potential is shifted to positive potential, the coating pore resistance is reduced. The fact indicates that as a applied constant potential is shifted to positive potential, the brass coated is dissolved more in solution. The stability of brass coated on steel cords decrease in the order pH=7.1 > pH=4.0 > pH=10.0. The above results are demonstrated by the data of scanning of electronic microscopy(SEM)/energy dispersive spectrometer(EDS).

  • PDF