• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1747-1752
• /
• 2008

강원도 산간지역에 위치한 소하천의 경우 유송잡물 및 토석류에 의하여 교량이 파괴되거나, 통수능이 작아져 댐의 역할을 하게 됨으로 인해 교량 상류지역이 침수피해를 입는 경우가 많이 발생하고 있으며 강원도 산간지역에 설치된 소규모 수공구조물들은 교량의 경우 교각이 많아 경간장이 짧고, 교량 상판이 제방고 보다 낮게 설치되어 있는 등 하천흐름에 장애를 주는 많은 요인들을 내재하고 있어 홍수시 하천유량의 증가에 따른 하천흐름 해석, 유송잡물의 발생원인 및 수공구조물에 미치는 영향들에 관한 판단기준 마련이 시급한 실정이다. 유송잡물의 발생경로는 대부분 산지계류에서 집중호우시 산사태발생에 따른 유목과 토석류 발생이 주원인이 된다. 또한 유송잡물은 큰 홍수시 고수위가 오랜 시간동안 지속될 경우 가장 많이 발생하는데 이때 발생한 유송잡물은 개별적으로 이송되고 일반적으로 하천의 중앙으로 이동하는 경향이 있으며 수심이 깊고 유속이 빠른 곳에 집중된다. 또한 유송잡물은 큰 홍수시 고수위가 오랜 시간동안 지속될 경우 가장 많이 발생하는데 이때 발생한 유송잡물은 개별적으로 이송되고 일반적으로 하천의 중앙으로 이동하는 경향이 있으며 수심이 깊고 유속이 빠른 곳에 집중된다. 본 연구에서는 홍수시 유송잡물 이동특성에 대한 국내 외 문헌조사, 현장피해사례조사 및 현장모니터링 조사를 실시하고 1차원 모형인 HEC-RAS와 2차원 모형인 RMA-2를 이용하여 수리모델링 분석에 따른 수치모의를 실시하고 분석하였다.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.755-764
• /
• 2016

In this paper, to verify the field application of a displacement estimation technique based on the relationship between displacement and strain, static and dynamic field load test are performed on three-span continuous real bridge structures. The superstructure types of the test bridges are IPC girder highway bridge and steel box girder AGT bridge. LVDTs and strain gauges are attached to them; then, the responses due to test vehicle are measured. To obtain the displacement-strain relationship of the test bridges, the bridges are modeled as grillage system with 6 DOFs for the purpose of structural analyses. Static and dynamic displacements, which are estimated using both the calculated displacement-strain relationship and the measured strain signal, agree well with the values measured by LVDT. This study demonstrates that the displacement estimation technique using the strain signal can be effectively applied to the displacement measurement of bridge structures that cross rivers/roads/railways or have high clearance.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.2 s.35
• /
• pp.187-199
• /
• 1998

The highspeed railway bridge which support continuous and high moving mass evalute the dynamic state and make the displacement of the bridge makes more or less, but up to this time the bridges are designed by the static design concept. for example when we design bridge we use impact factor, which only times the static load makes dynamic load. But becouse it simples. it can't express all of the effects. And so, in this report we study the modeling method of the moving mass and the dynamic factor.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.154-161
• /
• 2012

The damping ratio of railway bridge has become one of the most important issues in dynamic design and dynamic stability of railway bridge. In the present study, laboratory and field test were performed for railway bridges such as a twin I-shaped steel composite girder, PSC box, steel box, PSC, IPC, PRECOM, preflex. The damping ratio of railway bridge according to structure types was estimated by logarithmic decrement method. Therefore, magnitude, frequency and amplitude of load did not affect damping ratio of railway bridge. Also, damping ratio limit of steel composite and PSC bridges was evaluated in 1.0%.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.17-24
• /
• 2002

Dynamic behaviors of a bridge system with several simple spans are evaluated to examine the effects of nonlinear abutment motions upon the seismic responses of the bridge. The idealized mechanical model for the whole bridge system is developed by adopting the multi-degree-of-freedom system, which can consider various influential components. To compare the results, both linear and nonlinear abutment-backfill models are prepared. The linear system has the constant abutment stiffness, and the nonlinear system has the nonlinear stiffness considering the abutment stiffness degradation due to the abutment-soil interaction. From simulation results, the nonlinear abutment motion is found to have an important influence upon the global bridge motions. Maximum relative distances between adjacent vibration units are found to be larger than those found from the linear system. In particular, maximum relative distances at the location with the highest possibility of unseating failure are increased up to about 30% in the nonlinear system. The effects of nonlinear behavior of an abutment on the bridge seismic behaviors are also increased as the number of span increase. Therefore, it can be concluded that the abutment-soil interaction should be considered in the seismic analysis of the bridge system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1989

The stress history of a bridge is different depending on the characteristic of traffic flow. Because the flow is varied with vehicle type, weight and headway time etc., statistical analysis in bridges is necessary to estimate the history by traffic flow. By applying the statistical analyses in fracture mechanics, the remaining service life of the structure can be estimated. In this paper, 1)the statistical analysis of vehicle type, weight and headway time etc. to analysis randomness of traffic flow, 2)measuring and analysis of stress history of a real bridge, 3)reappearance of stress history by Monte-Carlo Simulation using constitution ratio of vehicle type, weight and headway time as probabilitic variable, 4)comparision of the calculated and modelled stress history, 5)calculation of reduction factor, 6)comparision of frequency of stress range depending on span length etc. were performed. From the results, the basic modelled stress history which is necessary for the method of estimation of the remaining service life of the structure could be suggested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.144-149
• /
• 2011

합류부에서의 수공구조물의 설치는 수리학적으로는 매우 불리하며, 최근 심각해지고 있는 국지성 집중호우로 인한 과중한 유량이 합류부에 집적되어 홍수위를 상승시킴으로써 하천 범람 피해의 주원인이 된다. 본 연구에서는 1차원 HEC-RAS 및 2차원 수치모형 CCH2D을 이용하여 합류부에서의 교각설치에 따른 하천흐름 변화를 분석하고 각 모형의 성과를 비교 검토한다. 또한 2차원 모형인 CCHE2D 모형의 원형교각 배치에 대한 단점을 보완하고자 2차원 수리해석 모형인 FLUMEN모형과 함께 비교 분석하여 실제 교각의 배치, 형상 및 제원이 고려된 격자망을 이용하여 합류부 주변에 위치한 교량에 의한 흐름 유동특성을 평가한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.389-402
• /
• 2014

In this paper, the load test of full-scale precast concrete arch bridges considering reinforced joint and backfill was conducted. It is an improved method that the reinforced joint enhanced the structural performance of conventional masonry arch system which was proposed by previous researchers. The models of full-scale test are $10m(span){\times}3m$ (rise) and $10m(span){\times}2m$ (rise), which are 2 meters in width. The critical load position was shown at a third-span from the results of the pre-analysis. Based on the this results, the positions of load, measuring items and points were determined in experiments. As a result, the maximum load capacity of the specimen $10m{\times}2m$, a relatively small rise to span ratio (compared to the specimen $10m{\times}3m$), was higher than the specimen $10m{\times}3m$. It was evaluated that all the specimens have sufficient structural performance on the design load.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.96-106
• /
• 2014

The increased vibration level of the railway bridge could make significant noise and, also, cause structural damages such as fatigue cracks. Related to these subjects, a spherical elastomeric bridge bearing, which is layered by hemispherical rubber and steel plates, was investigated in terms of its vibration performance. Several different shape factors could be considered by changing the curvature of hemispherical surface and size in rubber and steel plate thicknesses in the manufacturing stage. The performance of the spherical elastomeric bearing for the reduction in vibration was compared with that of the conventional bearing by performing vibration experiments on a scale-downed model. The rubber material characteristics and spherical shape are found to be important parameters in reducing the bridge vibration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.955-963
• /
• 2006

As the geometrical characteristic of the curved bridge, the seismic response of curved bridges are different from straight bridges. This study analyzed the seismic response of the curved bridges considering diverse factors such as radius of curvature, direction of seismic load and support condition. The improved simple modeling of the curved bridge for seismic analysis is proposed, and it is compared with the detail modeling in order to verify the simple modeling. Three simply supported curved bridges and six 3-span continuous bridges are selected for seismic analysis. The behavior of curved bridges are evaluated in terms of the displacement and the force at supports and piers under seismic load applied in various directions. The results of this study show that upward reaction force may appear in simply supported curved bridge under seismic load. And continuous curved bridges are affected by the direction of the seismic load.