• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.203-205
• /
• 2019

위성항법시스템의 안정적인 정보 제공의 요구사항은 점차 증가하고 있지만, 의도적인 전파교란 및 자연환경에 의하여 성능이 저하된다. eLoran 시스템은 위성항법시스템의 단점을 보완하기위한 대표적인 지상파항법시스템으로 고출력 신호로 의도적인 전파교란에 강인한 장점이 있다. eLoran 시스템에서 사용자는 E-field 또는 H-field 2가지 종류의 수신 안테나를 사용 환경에 따라 적합한 것을 사용한다. 접지가 필요없고 상대적으로 주변 전자장비의 잡음에 강인한 H-field안테나는 두 개의 루프로 구성되어 루프간의 위상과 이득차이로 일정한 원형의 지향성을 가지지 못한다. 그러므로 수신한 신호의 방향에 따라 측정치의 변화가 발생하므로 H-field 안테나를 사용시에는 수신하는 신호의 방향에 따른 오차를 제거해야한다. 본 논문에서는 H-field 안테나와 송신국간의 기하학적 방향오차에 따른 오차를 제거하기 위한 후처리 필터를 제안하였다. eLoran 모의 신호생성기를 활용하여 오차를 분석하고 모델링하여 제거하는 기법을 개발하였다. 제안한 기법을 검증하기 위하여 시뮬레이션과 차량실험을 통하여 오차를 확인하고 제거하여 성능향상을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.493-500
• /
• 2014

Nonlinear characteristics of cellular counterflow diffusion flame near the radiative extinction limit at large Damk$\ddot{o}$hler number are numerically investigated. Lewis number is assumed to be 0.5 and flame evolution is calculated by imposing an infinitesimal disturbance to a one-dimensional(1-D) steady state flame. The early stage of nonlinear development is very similar to that predicted in a linear stability analysis. The disturbance with the wavenumber of the fastest growing mode emerges and grows gradually. Eventual, an alternating pattern of reacting and quenching stripes is developed. The cellular flame temperature is higher than that of 1-D flame because of the gain of the total enthalpy. As the Damk$\ddot{o}$hler number is further increased, the shape of the cell becomes circular to increase the surface area per unit reacting volume. The cellular flames do not extinguish but survive even above the 1-D steady state extinction condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.99-106
• /
• 2005

The SRT(stability rating test) technique, which is indispensable for the development of a LRE(liquid rocket engine), essentially requires a development of a combustion test sequence as well as artificial perturbation devices. For the development of an indigenous SRT technique, several combustion tests of sub-scale LRE were performed to search a proper combustion test sequence. At first, a pressure-wave inducing device which is used for adapting pulse gun was designed and a cooling gas supply system for the pressure-wave inducing device was set up to prevent a malfunction of pulse gun. Through the several combustion tests which included cooling procedure of a pressure-wave inducing device, a proper combustion test sequence was found out. It did not make any significant disturbance at normal combustion process. Finally, an indigenous SRT technique has been developed successfully.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.4
• /
• pp.32-41
• /
• 1994

The stabilized Michelson interferometer was developed in order to measure micro dynamic displacement at the surface of solids due to elastic wave propagation. The stabilizer was designed to compensate light path disturbances using a reference mirror driven by piezoelectric actuator. Using stabilizer, the effect of external vibration was reduced and the quadrature condition was satisifed. As the results, the output of photodetector had maximum sensitivity and linearity. The minimum detectable displacement was 0.3nm at the band width of 10 MHz. The epicentral displacements due to the glass capillary breaks and the steel ball drop impact were measured using the developed interferometer and the results were compared with the calculated one.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.116-122
• /
• 1988

Interfacial shear stresses have been determined for countercurrent stratified flow of air and water in a nearly-horizontal rectangular channel, based upon measurements of pressure drop, gas velocity profiles and mean film thickness. A dimensionless correlation for the interfacial friction factor has been developed as a function of the gas and liquid Reynolds numbers. Equivalent surface roughnesses for the interfacial friction factor have been calculated using the Nikuradse correlation and have been compared with the intensity of the wave height fluctuation on the interface. The results show that the interfacial shear stress is mainly affected by turbulent mixing near the interface due to the wave motion rather than by the roughened surface.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.523-531
• /
• 2008

In hole type CPTu equipment which combines the concepts of inhole test method and piezocone test method was newly developed in order to evaluate the dynamic properties of marine soils. It is possible to perform inhole type CPTu without any additional source device because the source and receiver are contained inside the cone rod, which is different from the conventional seismic cone system. In this study, laboratory tests using kaolinite as soft soil and numerical simulations using finite element method were carried out to investigate the effects of several parameters including test methods and soil conditions on the test results from inhole type CPTu and to find out the optimum test method. It was found that it is necessary to maintain the length of swing arm as well as the distance between source and receiver consistently to obtain the rigorous test results. The laboratory test and numerical results also reveal that contrary to the input wave frequency, the water content of soil layer and the disturbance due to the installation of swing arm apparently affect the shear wave velocity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.29-34
• /
• 1999

In the paper, the extened Huygens-Fresnel principle has been used to make an analysis of the statistics the received intensity for speckle propagation though the turbulent atmosphere. The results of these formulations include of the log-amplitude covariance as well as the wave structure functions, and It was found that the normalized variance is dependent on the turblence strength and rises above unity.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2693-2695
• /
• 2003

M진 직교 진폭 복조기(M-ary QAM Demodulator)를 위한 개선된 이중모드 MCMA 블라인드 등화기법을 제안하였다. 최소 교란 원리(the principle of minimum disturbance)를 MCMA에 적용함으로써 개선된 블라인드 등화기법과 반송파 위상 복구 능력을 얻으며 dicision-directed algorithm과 함께 이중모드로 동작함으로써 향상된 안전성(stability)과 견고성(robustness)얻을 수 있다. 잡음 특성과 시변채널에 대해 컴퓨터 모의 실험을 통하여 제안된 이중모드 알고리즘의 개선된 성능을 검증하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.77-80
• /
• 2019

GPS 항법 시스템은 재밍(jamming)에 취약한 것으로 알려져 있다. 실제로 2010년부터 북한은 서해상과 수도권에 GPS 전파교란 공격을 감행, 운행 중이던 선박과 항공기의 네비게이션 등에 다수의 장애현상을 유발시켰다. 이것에 대한 대안으로 eLoran(enhanced Long Range Navigation)이 GPS 항법 시스템을 보완할 수 있다고 알려져 있다. 이에 따라 해양수산부(MOF)는 기존 포항·광주 로란-C 송신국에 UTC(Coordinated Universal Time) 기반의 시각동기시스템 구축하여 지상파 eLoran 시스템으로 활용하기 위한 eLoran 사업을 진행하고 있다. 본 논문에서는 기존 포항·광주 로란-C 송신국에 UTC(Coordinated Universal Time) 기반의 시각동기시스템을 구축하기 위한 요구 사항을 살펴보고, 이 요구 사항에 따른 포항·광주 로란-C 시각동기시스템의 구축 결과에 대해 기술하였다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.25-34
• /
• 2008

A new hybrid oedometer cell is designed and manufactured to investigate a behavior of soft soils by using elastic and electromagnetic waves during consolidation test. Bender elements, which generate and detect shear waves, are placed in the top cap and the bottom plate and mounted on the oedometer wall. Double wedge type electrical resistance probe, which measures local void ratio change, is positioned onto the top cap of the oedometer cell. The bender elements and the electrical resistance probe are anchored into a nylon set screw with epoxy resin. The nylon set screw with epoxy resin minimizes directly transmited elastic waves through the oedometer cell due to impedence mismatch and allows for easy replacement of defected bender elements and electrical resistance probe. Primary consolidation time can be estimated from the slope of electrical resistance versus log time curve and the evolution of shear wave velocity. The shear wave velocity can be used to assess inherent anisotropy when disturbance effects are minimized because particle alignment affects the shear wave velocity. The void ratios evaluated by the electrical resistance probe are similar to those by the settlement during consolidation. This study suggests that the shear wave velocity and the electrical resistance can provide complementary imformations to understand consolidation characteristics such as primary consolidation, anisotropy, and void ratio.