• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.69-72
• /
• 2008

The so-called Pier-Shafts system which consists of the continuous column and shaft is often used to support the highway bridge structure because of advantages in easy construction and low cost. In the earthquake region, the Pier-Shafts system undergoes large displacements and represents a nonlinear behavior under the lateral seismic loading. The soil-pile interaction should be considered for more accurate analysis of the Pier-Shafts system. In this study, a transverse response of a reinforced concrete Pier-Shafts system inside multi-layered soil medium is predicted using a finite element program which adopts an elasto-plastic interface model for the interface behavior between the shaft and the soil. Then, seismic analysis is performed to evaluate the performance of Pier-Shafts system under strong ground motion and their results are verified with experimental data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.295-295
• /
• 2017

본 연구에서는 2차원 수리모형을 이용하여 자연하천에 보가 없는 경우, 직선 보, 경사 보 3가지 경우로 적용하여 2차원 수리분석을 실시하여 상 하류 수리특성을 검토하여 향후 하천개설 및 하도 설계의 기초자료를 제공하고자 한다. 보의 배치가 하천에 미치는 영향으로 수리특성의 변화와 유속의 변화, 토사의 이동 등 하도 내 흐름 특성의 2차원 해석결과를 도출함으로써 하도 내 횡단구조물 설치에 따른 기초적인 자료를 제공하고자 한다. 보 설치로 인한 하천 주변 친수 공간 발달로 인한 여가시설, 이동편의를 위한 도로설치 등 공간조성 설계 시 기초자료로 활용가능 할 것이다. 연구대상 하도구간은 경주 시내를 통과하는 형산강의 남천합류부 2.7km 지점부터 경주시 천북면 모아리에 위치한 모아수위관측소까지 약 8.7km 구간이다. 연구대상 유역인근에 위치한 수위관측소는 경주, 모아 관측소가 있으며 수리해석을 위한 경계조건으로 활용하였다. 연구대상 구간의 상류 부근에 경주 북천이 합류하고 있으며 현재 월령보가 경사 방향으로 설치되어져 있다. 본 연구에서는 상류경계 입력자료 계획홍수량은 형산강하천기본계획보고서(2011)을 참고하였으며, 경주 금장대 부근 합류하는 북천의 계획홍수량은 북천하천기본계획보고서(2011)를 참고하였다. 하류 경계입력자료 계획홍수위도 형산강하천기본계획보고서(2011) 참고하여 2차원 수리특성을 분석하였다. 수문량에 따른 홍수위 변화특성을 분석한 결과 풍수량과 100년 빈도 홍수량에 대해서 직각보 최대수위가 높게 분석되었으며, 유속에 대해 분석한 결과 풍수량과 100년 빈도 홍수량에 대해서 직각보가 경사보보다 물넘이 부분에서 최대유속이 빠르게 분석되었다. 또한 보가 없을 경우와 풍수 시 흐름특성을 분석한 결과 유선방향이 현재의 경사보 방향과 일치하는 것으로 분석된다. 이상의 연구결과를 검토할 때, 직각보 상류에 자전거 교량을 건설할 때 최대 유속이 발생하는 위치에는 교량기초공이나 교각 부분의 보강이 필요할 것으로 판단된다. 둔치 주변 유속변화가 발생할 수 있으므로 수위와 유속을 동시에 고려한 친수시설을 설치할 필요가 있는 것으로 판단된다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.141-148
• /
• 2000

For the construction of 4.8km long Multi-Purpose Jamuna Bridge in Bangladesh, 2 or 3 large diameter open-ended steel pipe piles were used for the foundation of piers. A total of 123 piles were driven for 50 piers and 2 test piles from the river bed through the normally-consolidated upper sand layer and rested n top of gravel layer. Two types of piles, having 3.15 or 2.50m diameter and variable wall thickness in the range of 40 to 60mm, were driven to the depths of 69 to 74m with the rake of 6:1 by connecting 2 or 3 pieces of short piles. Dynamic pile tests were performed on 24 selected piles during pile driving and soil plug length inside the pile was also measured after driving of each short section.These piles were plugged with soil to, though slightly affected by pile diameters, about 75% of total length of pile driven. Active plug at the tip of pile contributed substantial amount of inner skin friction to the total capacity. Piles soon after driving showed a skin-friction dominant pile behaviour, tat is, 90% of total capacity being developed by skin resistance. Quakes values and Smith damping factors were almost constant regardless of pile diameters. This result reflects the influence of uniform soil condition at the site.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.192-207
• /
• 2018

The Hyangwonjeong and Chwihyanggyo located in the back garden of Gyeongbokgung Palace have mainly been investigated by referring to historical records about the reign of King Gojong and various drawings thought to have been made in the late Joseon period. Because the current Chwihyanggyo was rebuilt temporarily after being burned to the ground during the Korean War, its form and the location of its reconstruction are not grounded on any accurate historical investigation. Although there are some photos of the Chwihyanggyo that were taken between the end of the Joseon period and the Japanese colonial era, there is no information about the photographer or when they were taken, and it is hard to see which photos show the original Chwihyanggyo Bridge with them. The Cultural Heritage Administration, which is currently promoting the restoration of the Chwihyanggyo, has recognized this problem and initiated research on the matter. In 2017, an excavation survey successfully identified the original location of the Chwihyanggyo, as well as that of Hyangwonji Gado (假島), and the shape of the first foundation stone in the pier. With these findings it was possible to infer the ways in which the Chwihyanggyo has changed over the years. Moreover, by measuring the AMS (Accelerator Mass Spectrometer) of the samples collected in the mounding layer of the Gado where the Hyangwonjeong is located, it was discovered that the Hyangwonjeong was constructed sometime after the Imjin waeran (Japanese Invasion of Korea in 1592), which means that the theory that 'the late Joseon Hyangwonjeong was not the former early Josenn Chwirojeong' is groundless. Judging by the materials found to date, we can reasonably assume that the Chwihyanggyo and Hyangwonjeong must have been built around the same time that Geoncheonggung Palace was founded in the late Joseon period.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1111-1119
• /
• 2022

Tourism projects through islands in the waters of Sinan-gun became active, and as a result, a total of 13 marine bridges connecting islands were completed. However, the marine bridge constructed in the fairway is dangerous for traffic. Particularly, in the case of the marine bridge connecting two islands, the width of the fairway is extremely narrow, therefore the risk is higher. In this study, we evaluated the risk of collision between marine bridge piers and ships using the IALA Waterway Risk Assessment Program (IWRAP), a risk assessment model for port waterways, based on a maritime traffic survey on the coastal bridge in Sinan-gun. The results, indicated that No.1 Sinan bridge had the highest probability of collision and most of the transit ships were coastal passenger ships. In addition, No.1 Sinan bridge was the place where the most collision accidents occurred among the marine bridge piers in the target sea, and the cause this study was analyzed. An analysis of the satellite images of the sea environment of No.1 Sinan bridge using an image processing method, confirmed that obstacles that could not be seen in the chart existed nearby the bridge. As a result, traffic was observed to be concentrated in one direction, unlike two-way traffic, which is a method of inducing traffic of bridges to avoid obstacles. The risk cause analysis method using the image processing technique of this study is expected to be used as a basic research method for analyzing the risk factors of island bridge in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.12-20
• /
• 2023

This study presents basic data on how to secure stability by analyzing the change in tensile force of steel rod and the inclination characteristics of PSC BOX in the "Temporary fixation system using internal prestressing tendon", which is mainly applied to construction of superstructures by FCM. To date, it has been difficult to confirm the changes in tension force of the steel rod and the inclination of the PSC BOX because the steel rod was installed vertically inside the pier and the PSC BOX. Therefore, measurement of the change in length of the steel rod and the displacement of PSC BOX were performed using a micro-measured FBG sensor. Comparisons of the calculated tensile force and the residual tensile force of the steel rod revealed that the safety factor decreased in all bridges. The cause was mainly identified to be the loss of tensile force in fixation~1segment, and countermeasures are suggested. The analysis of the inclination characteristics showed that the inclination increased with the segment progresses even in bridges with sufficient safety factor, and the difference before and after the segment was confirmed. In addition, the increase in inclination was related to the loss of tension force in the steel rod, and the stress on the opposite sides of the inclination was further reduced. It is believed that upward tensile force is generated in the steel rod on the opposite side of the inclined side due to the unbalanced moment, causing the difference in stress of the steel rod between the two sides.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.2
• /
• pp.13-23
• /
• 2022

The ground-structure interaction of the bridge foundation has been pointed out as a major factor influencing the behavior of the bridge during earthquakes. In this study, the effect of characteristics of ground and bridge foundation on the earthquake vulnerability is investigated. From the pseudo-static analysis, it is confirmed that non-linearity becomes lesser and horizontal load becomes greater when surcharge is considered. It is also found that as the ground worsens and the size of foundation decreases, horizontal load reduces. To derive reasonable structural model for bridge foundation, fragility curve is obtained considering four conditions (fixed condition, equivalent linear condition, non-linear without surchage condition, non-linear with surcharge condition) and compared. Seismic analysis is performed on single pier with Opensees. From the earthquake vulnerability analysis, it is found that shallow foundation can be assumed as fixed condition. In conservative approach, stiffness of spring can be obtained based on Korean highway bridge design code for pile foundation which can consider the ground condition.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.447-455
• /
• 2006

Together with the trend of enhancement in domestic industrial development and economic progress due to import and export, the demand for construction of the roads, bridges, especially port facilities, and several coastal protection and ocean structures is increasing rapidly. MOMAF of Korean Government is driving construction cf 9 new ports and renovation cf the existing fishery ports. Among these structures most of bridge base, wharves, dolphins, quays, and jetties are being newly built cf steel or concrete pile. As the base, supporting bulkheads, and piles are underwater after construction, it is difficult to figure out the status of structures and not enough to get maintenance and strengthen the structures. Every year, moreover, these works suck the government budget due to higher incomplete maintenance expense for protection from corrosions cf structures and increased underwater construction period. For the purpose cf cutting down the expense cf government budget, it is necessary to extend the life cycle of the existing structures. Therefore, we developed a new method for maintenance of submerged structures near the waterline by allowing dry work environment with the floating caisson. The method shows easy to move around the working area and handle. It also showed not only a significant reduction of maintenance expenses and time for anti-corrosion work but also better protection This will be a milestone to reduce the maintenance and construction expenses for the shore and water structures.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.19-30
• /
• 2005

A coupled three-dimensional pile group analysis method was developed by considering complex behavior of sub-structures (pile-soil-cap) which included soil nonlinearity and the behavior of super-structure (pier). As an intermediate analysis method between FBPier 3.0 and Group 0.0, it took advantages of each method. Among the components of a pile group, individual piles were modeled with stiffness matrices of pile heads and soils with nonlinear load-transfer curves (t-z, q-z and p-y curves). A pile cap was modeled with modified four-node flat shell elements and a pier with three-dimensional beam element, so that a unified analysis could be possible. A nonlinear analysis method was proposed in this study with a mixed incremental and iteration techniques. The proposed method for a pile group subjected to axial and lateral loads was compared with othe. analytical methods (i.e., Group 6.0 and FBPier 3.0). It was found that the proposed method could predict the complex behavior of a pile group well, even though piles were modelled simply in this study by using pile head stiffness matrices which were different from the method introduced in FBPier 3.0.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.163-170
• /
• 2006

Together with the trend of enhancement in domestic industrial development and economic progress due to import and export, the demand for construction of the roads, bridges, especially port facilities, and several coastal protection and ocean structures is increasing rapidly. MOMAF of Korean Government is driving construction of 9 new ports and renovation of the existing fishery ports. Among these structures most of bridge base, wharves, dolphins, quays, and jetties are being newly built of steel or concrete pile. As the base, supporting bulkheads, and piles are underwater after construction, it is difficult to figure out the status of structures and not enough to get maintenance and strengthen the structures. Every year, moreover, these works suck the government budget due to higher incomplete maintenance expense for protection from corrosions of structures and increased underwater construction period. For the purpose of cutting down the expense of government budget, it is necessary to extend the life cycle of the existing structures. Therefore, we developed a new method for maintenance of submerged structures near the waterline by allowing dry work environment with the floating caisson. The method shows easy to move around the working area and handle. It also showed not only a significant reduction maintenance expenses and time for anti-corrosion work but also better protection. This will be a milestone to reduce the maintenance and construction expenses for the shore and water structures.