• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.27-28
• /
• 2013

이 논문에서는 부분 그늘짐에서도 다중 태양광 모듈의 최대 전력점 추종이 가능한 셔플링 차동전력 마이크로 컨버터를 설계 및 구현하였다. 마이크로 컨버터 시스템은 PV에 직접 연결된 셔플링 컨버터와 이후 단으로서 부스트 컨버터가 존재한다. 셔플링 컨버터는 다이렉트-시비율 기법을 통하여 PV모듈을 최대전력으로 동작시키고, 부스트 컨버터는 전압루프를 통하여 P&O 방식으로 최대 전력점을 추종하였다. PV 모듈에 병렬로 셔플링 컨버터를 적용함으로써, 다중 태양광 모듈의 전류 편차를 차동전력으로 조절하여 각각의 최대 전력점을 추종하면서 안정된 동작을 유지할 수 있다. 제안하는 컨버터는 2개의 PV모듈이 연결된 정상상태 연속모드 (CCM) 160[W]급 마이크로 컨버터 하드웨어 프로토타입을 통해 동작특성을 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.37-39
• /
• 2007

기존의 부스트 컨버터에 보조 스위치와 다이오드, 공진 인덕터와 공진 커패시터를 추가하여 소프트 스위칭을 위한 보조회로가 포함된 새로운 구조의 태양광 발전용 부스트 컨버터를 제안하였다. 공진 인덕터에 의해 스위치의 턴 온 시 영전류 스위칭을 하고, 공진 커패시터에 의해 스위치 턴 오프 시 영전압 스위칭을 함에 따라 스위칭 손실을 줄일 수 있다. 제안된 회로의 동작모드를 분석하고, 제안된 회로의 검증을 위해 PSIM 시뮬레이션을 통해 모의실험 하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.167-173
• /
• 2018

We propose an air purification system that utilizes aerial plant parts and root zone of indoor plants where light is insufficient and air circulation is bad. In order to maximize the air purification effect of the plant, the aerial plant parts illuminates mixed light combining blue and green LED and CRI(Color Rendering Index) LEDs close to natural light, respectively. And the root zone was forcibly circulated by the fan to use the soil as a filter. The indoor air purification system combined with the light source and the fan removed most polluted air in the shortest. In the case of mixed light and CRI LEDs of indoor air purification system, fine dust decreased by 14%, 14.2%, and TVOC(Total volatile organic compounds) decreased by 7.5% and 9.4%, respectively. In the experiment in which the fan was operated for 15 minutes, the TVOC decreased to 97.8%. The photosynthesis of the plant and the use of soil as a filter were able to purify polluted air in a short time. And the fan's temporary operation gave the similar effect of continuous operation.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.297-298
• /
• 2016

본 논문에서는 제안하는 컨버터와 인버터의 회로를 통합하여 다중레벨의 출력 전압과 커패시터의 전압 균등화 동작을 부스트와 차지펌프 회로를 이용하여 고효율의 회로를 구성하였다. 또한 결합 인덕터를 사용함으로써 누설인덕턴스를 최소화 할 뿐만 아니라 추가적인 전하균등화 회로를 추가하지 않음으로 써 가격에서도 유리함을 제공한다. 부스트-차지펌프회로와 멀티레벨 인버터가 결합된 새로운 구조를 제안하고 이를 수식적으로 정리하고 시뮬레이션과 실제 하드웨어를 통하여 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.51-56
• /
• 2013

In this paper, we had design the module of the LED-based media transmission mechanics visible light communication system. To implement the media transmission system through visible light communication transmitter, receiver module the using high brightness, we proposed visible light communication system to implement communication distance of up to a maximum transmitter-receiver distance using a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter. It was increased efficiency of approximately 20% by measuring the performance during lens wearing or not wearing on the LED module to improve the efficiency of the media transmission system.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.579-585
• /
• 2020

In this study, we used byte-inversion transmission method to prevent the flicker of lighting source in a visible light data communication link. In the transmitter, the non-return-to-zero (NRZ) signal with 9.6 kbps was on-off keying (OOK) modulated with a 100 kHz square wave carrier and byte-inversion signal was added after each byte to make the average optical power of the light-emitting diode (LED) constant. In the receiver, we used a band-pass filter to eliminate the interference of the 120 Hz noise which was induced from the adjacent light lamps, and an OOK demodulator to recover the original NRZ signal This scheme is useful in constructing wireless data networks using the illumination of visible light lamps.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.571-579
• /
• 2019

Visible light communication (VLC) performs illumination and communication simultaneously, thus it is important to prevent the flicker due to the optical power variation during data transmission and at the same time to have dimming control capability. In this paper, we used Manchester code for flicker-prevention and dimming control. In the transmitter, the duty factor of the Manchester code was used for controlling the LED illumination. In the receiver, the edge-spike signals of an RC-high pass filter were used for recovering the Manchester code while preventing the adjacent noise light. In experiments, the LED light was kept flicker-free and the average optical power was controlled in the range of 8~68 % of the continuous wave (CW) LED light by changing the duty factor of the Manchester code.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.140-141
• /
• 2011

본 논문은 MPPT가 가능한 세 개의 단상 인버터를 삼상(3상 4선) 인버터로 구성하고, 부하 종단의 역조 방지 검출 장비와 연동 운전하여 전체 시스템의 역조 및 역률 제어가 가능한 태양광 발전 시스템 개발에 대한 것이다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.833-839
• /
• 1986

This paper describes the development of a new type of an integrated optical filter using the frequency characteristics of a directly-connected directional coupler with a Rib waveguide. It has been designed for multiplexing and demultiplexing light froups in different wavelength regions. Also, the effects of higher modes, couplings between input waveguides or output waveguides, and dispersion of material are considered.