• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.850-857
• /
• 1995

VO$_{x}$ and V$_{1-x}$ Sn$_{x}$O$_2$thin films were fabricated on a glass under various $O_2$pressure by reactive e-beam evaporation method. Thermochromism and transition temperatures of these thin films were examined by measuring spectral solar transmittances with spectrophotometer at various temperatures, and their stoichiometries were analyzed by RBS. Oxygen pressure of 5$\times$10$^{-5}$ . Torr was found to be optimum to fabricate near stoichiometric VO$_2$thin film by reactive e-beam evaporation. Rapid thermal annealing(RTA) was adopted to crystallize the thin films and annealing at 40$0^{\circ}C$ ~45$0^{\circ}C$ for 20 ~ 30 seconds was found to be the optimum annealing condition for the crystallization of VO$_2$thin film of 100nm-300nm thickness. 1~6 atomic percent of Sn was doped into VO$_2$thin films to fabricate V$_{1-x}$ Sn$_{x}$O$_2$thin films. These V$_{1-x}$ Sn$_{x}$O$_2$thin films showed distinct thermochromism and significantly higher transition temperatures than VO$_2$thin film.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.845-848
• /
• 2013

Due to intense climate changes and extreme weather conditions a noticeable decrease has been observed in the growth of certain plants. The indoor plant factories would have certain benefits including increase in crop yield, reduction in distribution cost, and maintains the healthy freshness level of the agricultural product. Recently, an artificial light source with optimum wavelength is spot lighted to fulfill the need of light for the indoor plant factories. The energy efficient light emitting diodes (LED) provide the essential light energy for the proper growth of indoor cultivated plants. This work focuses to utilize ubiquitous sensors network(USN) in providing suitable environment for the proper growth of agricultural product inside the indoor plant factory. The proposed system makes use of sensors and actuators, communicating each other through WPAN, ZigBee network. The proposed system obscured the traditional indoor plant factories with easy installation and wireless connectivity of the sensors and actuators along with eliminating the web of wires reducing the initial installation and maintenance cost.

• KSBB Journal
• /
• v.22 no.3
• /
• pp.168-173
• /
• 2007

To clarify the usefulness of fluorescent diagnosis for cancer, we investigated the optimal method of administrating 5-aminolevulinic acid (5-ALA), 5-aminolevulinic acid methyl ester (ALA-methyl ester) by analyzing fluorescence signal of Protoporphyrin IX (PpIX) in the cultured normal and cancer cells. 5-ALA and ALA-methyl ester was injected as a photosensitizer to the cancer liver cells (HepG2) and normal liver cells (Chang). Chang and HepG2 cells were incubated with various concentrations of 5-ALA and ALA-methyl ester (0-800 ${\mu}g/mL$). The accumulation of PpIX induced by 5-ALA and ALA-methyl ester was in HepG2 and Chang. The cell viability was measured by MTT assay. Fluorescence of PpIX in HepG2 cell was excited at a wavelength ($\lambda$ = 410 nm) and showed an emission spectrum at 603.2 nm, 660.8 nm and 603.2 nm, 661.4 nm which could be related to the PpIX generation induced by the applied 5-ALA and ALA-methyl ester, respectively. The experimental results showed that fluorescence signal of PpIX was proportional to the concentration of 5-ALA and ALA-methyl ester in tumor cells, but measured with low concentration in normal cells. Another results showed that the PpIX formation rate induced by ALA-methyl ester is higher than that of 5-ALA.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

• Journal of Sensor Science and Technology
• /
• v.11 no.4
• /
• pp.209-217
• /
• 2002

The developing of buried fiber optic sensor with high sensitivity and broad-area detecting intruders is carried out using fiber optic ROTDR(Rayleigh Optical Time Domain Reflectometry). The sensing part was designed to be able to broad-area detect intrusion effect per optical fiber length under ground. The bending light losses in optical fibers are investigated by commercial mini ROTDR with wavelength $1.55{\mu}m$, distance range 5km, pulse width 20ns, SNR=5.7. The sensing fibers are selected as the common telecommunication fibers are the 1.5mm, 3.5 mm outer diameter, 4km each length fiber products. Experiments were investigate the characteristics of signal sensitivity according to applied intrusion weight. The relation between the applied weight and the bending loss was almost linear, and broad-area detect intrusion effects are the 2m resolution and $1.3m^2$ per optical fiber length respectively. The light loss by the applied weight on fiber was 0.17 dB/kg. that the sensitivity of the optical fiber sensor was sufficient to detect intruders passing over the buried optical fiber.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.371-376
• /
• 2007

We have investigated the lasing characteristics of the InGaAs quantum dot laser diode (QD-LD) and InGaAs quantum well laser diode (QW-LD) operated at the 980 nm wavelength range. The 980-nm lasers are used as a pumping source for a erbium-doped fiber amplifier (EDFA) and it shows high efficiency in long-haul optical fiber network. We have compared the threshold current density, the characteristic temperature, the optical power and the internal efficiency of QD-LD and QW-LD under a pulsed current condition. The QD-LD shows superior performances to the QW-LD. Further optimization of a LD structure is expected to the superior performances of a QD-LD.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1321-1328
• /
• 2019

Intermediate-wavelength solar radiation, also known as ultraviolet B (UVB: 290-320 nm) radiation, may cause premature aging and oxidative damage-dependent skin cancer in humans. UVB-induced formation of reactive oxygen species (ROS)-often a consequence of excessive exposure to these rays-could activate matrix metalloproteinases (MMPs) such as MMP-1 and MMP-3. These enzymes break down type I collagen in human fibroblasts. In this study, we assessed the antioxidant and anti-aging effects of ethyl acetate extract of blueberry (EEB). An antioxidant test in blueberries evaluated ROS production using CCD-986sk cells and DPPH assay. In order to evaluate the anti-wrinkle efficacy of blueberries, the MMP-1 production and type 1 procollagen synthesis evaluated and the expression of MMP 1, 3 were tested through Western blot and RT- PCR. EEB exhibited 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and reduced the production of UVB-induced ROS. Also, EEB inhibited UVB-induced processes associated with photoaging and skin cancer, such as reduction in procollagen production and increase in MMP-1 production. More precisely, EEB (50 ㎍/ml) markedly suppressed mRNA and protein levels of MMP-1 and -3. The anti-aging effects are attributable to the antioxidant activity of EEB. These findings indicate that EEB has a protective effect against UVB-induced aging in human fibroblast cells by regulating the levels of type-1 procollagen, MMP-1, and MMP-3.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.382-389
• /
• 2017

Currently, reticulocyte experimental calculation technology used in clinical laboratories are divided two types: manual and automated. Manual reticulocyte counting using a microscopy lacks accuracy due particularly to its low reproducibility, affecting the accuracy of manual reticulocyte count. Moreover, Automatic blood corpuscle analyzer flow cytometry is difficult to be used in underdeveloped countries and small scale laboratories due to relatively high cost. Therefore, this study tried to find a new method to complement these drawbacks. The aim of this study was to compare the stained reticulocytes count by spectrophotometer and also to analyze the statistics of spectrophotometer and flow cytometer. The same 8 EDTA samples were repeated 36 times to compare the agreement between spectrophotometer and flow cytometer. This study measured the specimen diluted 600 times at 700~780 nm by 10 differences. Wavelength between 710 to 730 by absorbance showed a positive correlation between standard data and test data (r=0.967, p<0.01), presenting a correlation between variables. Statistical analyses of regression for test and standard parametric data, the optimal dilution factor was 600 times. Therefore, this study tried to technical utilizes such as contributing economical for the reticulocyte absorbance apply from the auto spectrophotometer, a monitoring system for the reticulocyte relation anemia, etc. Therefore, more extensive studies, including an auto chemical analyzer application, will be needed.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.66-71
• /
• 1998

Two kinds of $Ga_2S_3:Er$ (type A and type B) single crystals were grown by the chemical transport reaction method using iodine as a transport agent. The single crystals were crystallized into a monoclinic structure. The optical energy band gaps were found to 3.375 eV for the $Ga_2S_3:Er$ (type A) single crystal and 3.365 eV fir the $Ga_2S_3:Er$ (type B) single crystal at 13K. When the $Ga_2S_3:Er$ (type A and type B) single crystals were excited by the 325 nm-line of a Cd-He laser, Photoluminescence spectra of the $Ga_2S_3:Er$ (type A) single crystal exhibited blue emission band peaked at 444 nm and green and red emission bands peaked at 518 nm and 690 nm. Pgitikynubescebce soectra if the $Ga_2S_3:Er$ (typeB) single crystal showed green and red emission bands peaked at 513 nm and 695 nm. Sharp emission peaks in the two kinds if $Ga_2S_3:Er$ single crystal were observed near 525 nm, 553 nm, 664 nm, 812 nm, 986 nm, and 1540 nm and analysed as originating from the electron transitions between the energy levels of $Er^{3+}$ ion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.161-162
• /
• 2011

최근 광전자 분야에서는 미래 에너지 자원에 대한 관심과 함께 GaN 기반 태양전지 연구가 활발히 진행되고 있다. GaN 물질은 높은 전자 이동도와 높은 포화 속도 등 광전자 소자에 유리한 광, 전기적 특성들을 가지고 있다. 또한, In의 함량을 변화시켜가며, 0.7eV에서 3.4eV까지 밴드갭을 조절함으로써, 자외선부터 적외선까지 태양빛 스펙트럼의 대부분을 흡수할 수 있는 장점이 있다. InGaN 태양전지의 효율을 높이기 위해서는 In의 함량을 늘려 밴드갭을 줄이는 것이 중요하다. 하지만 GaN 와 InN 간의 격자 부정합으로 인해 In 함량이 높은 단결정 InGaN 층을 두껍게 성장 하는 것이 어렵다. 때문에 GaN 기반 태양전지 관련 연구 그룹들이 태양전지의 효율 향상을 위해 활성층에 양자우물(MQWs) 구조, Supper Lattice (SLs) 구조와 같이 얇은 InGaN/GaN 층을 주기적으로 반복하여 적층함으로써 높은 조성의 In을 함유한 상질의 InGaN/GaN 층을 성장하는 연구들을 진행해 왔다. 본 연구에서는, p-i-n 구조와 MQW 구조를 갖는 InGaN 기반 태양전지를 제작하여, 각각의 특성을 분석해 봄으로써, In0.1Ga0.9N 태양전지 활성층의 구조에 따른 장/단점에 대해 논의하였다. 먼저 MOCVD를 이용하여 200 nm의 i-In0.1Ga0.9N 활성층을 갖는 p-i-n 구조와 In0.19Ga0.81N/GaN(3 nm/8 nm) MQWs (8 periods) 구조를 갖는 태양전지 에피를 각각 성장하였고, 그 후 공정을 통해 그림 1과 같이 InGaN 태양전지 소자를 제작하였다. 그 후, 각 태양전지의 전류/전압 곡선과 외부양자효율을 측정하여 그림 2와 같은 결과를 얻었다. p-i-n과 MQW 샘플의 외부양자효율은 각각 ~70%, ~25%로 측정 되었다. MQW 샘플의 외부 양자효율이 높지 않음에도 불구하고 p-i-n 구조에 비해 높은 In 함량을 가지고 있으므로, 더 넓은 파장의 빛을 흡수하여, 높은 단락전류(0.778 mA/cm2)를 보이고 있다. 또한 p-i-n 구조에 비해 높은 개방전압(2.3V)를 가지고 있으므로, MQW 샘플이 약 17% 정도 높은 변환효율(1.4%)를 보이고 있다. 이후 추가적으로 p-i-n 과 MQW 구조의 InGaN 태양전지에 나타나는 Voc와 Jsc의 차이를 Polarization 효과를 비롯한 다양한 측면에서 분석해 보고자 한다.