• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.108-113
• /
• 2011

Objectives: To determine the effect of the spectral output of single and dual-peak light emitting diode (LED) curing lights on the microhardness and color stability of commercial resin composites formulated with camphorquinone and alternative photoinitiators in combination. Materials and Methods: Three light-polymerized resin composites (Z100 (3M ESPE), Tetric Ceram (Ivoclar Vivadent) and Aelite LS Posterior (Bisco)) with different photoinitiator systems were used. The resin composites were packed into a Teflon mold (8 mm diameter and 2 mm thickness) on a cover glass. After packing the composites, they were light cured with single-peak and dual-peak LEDs. The Knoop microhardness (KHN) and color difference (${\Delta}E$) for 30 days were measured. The data was analyzed statistically using a student's t-test (p < 0.05). Results: All resin composites showed improved microhardness when a third-generation dual-peak LED light was used. The color stability was also higher for all resin composites with dual-peak LEDs. However, there was a significant difference only for Aelite LS Posterior. Conclusions: The dual-peak LEDs have a beneficial effect on the microhardness and color stability of resin composites formulated with a combination of camphorquinone and alternative photoinitiators.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.581-581
• /
• 2013

ITO (Indium Tin oxide)는 비화학 양론적 조성을 띄는 n-type 반도체 특성이 있으며 가시광 영역(380~780 nm)의 파장에 대한 높은 광 투과도(>85%)를 가지며 비교적 높은 전도도(${\sim}10^4/{\Omega}-cm$)를 갖고 화학적 안정성이 우수하여 투명전극 박막으로 많이 사용되어왔다. 또한, PET film은 전기절연성, 내후성이 우수하고, 85%의 투과율을 보이는 특성에 의하여 Flexible display의 기판으로 많은 연구가 진행되고 있다. 이와 같은 PET film에 ITO를 증착하여 광 투과도와 전기전도도가 우수한 Flexible display의 투명전극으로 많은 연구 개발이 이루어지고 있다. Flexible ITO 박막의 특성을 향상하기 위해서는 $200^{\circ}C$ 이상의 열처리 공정이 필요하지만, PET는 약 $200^{\circ}C$ 이상에서 열 변형이 일어나므로 열처리 공정이 어렵고 이러한 문제점을 해결하기 위해 ITO/PET film에서 PET film의 변형 없이 ITO 박막의 표면에 전자빔 형태로 조사하여 박막의 물성을 개선하는 연구가 진행되고 있다 [1]. 본 연구에서는 ITO/$SiO_2$가 증착된 PET film에 전자빔을 조사하여 ITO 박막의 물성 변화를 관찰하였고, 전자빔 에너지 변화 및 전자빔 조사 시간에 따라 ITO film의 전기적, 광학적 특성 변화를 분석하였다. 구조적 특성은 XRD (X-ray diffraction), 전기적 특성은 4-point probe, Hall measurement를 이용하였으며, 가시광영역의 광 투과도는 UV-Vis spectrometer로 측정하였다. 전기 광학적 특성 변화는 Figure of Merit (FOM) 수치로 분석하였다. 이 실험으로 PET film에 직접적인 열을 가하지 않으면서 ITO 박막의 표면에 전자빔을 조사 하여, 박막의 전기전도도 및 광 투과율, 결정성 향상 등을 관찰할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.476-481
• /
• 1997

Optimum operating conditions of the 0.98 $\mu\textrm{m}$-pumped broadband erbium-doped fiber sources, where the mean wavelength variation is minimized, have been experimentally investigated. The optimum conditions for the mean wavelength stabilization were found to be different between the case of the isolated source and the case of the presence of feedback. In case of feedback, the proper pump power that yields zero slope of mean wavelength variation was found to be lower than that of the isolated case, and the mean wavelength was found nearly unchanged over the wide range of pump power. Howerer, the feedback resulted in lower output power and the mean wavelength was found to be sensitive to the variation of feedback level. In the respect of mean wavelength stability, the better performance could be obtained with some feedback, provided that the feedback level is kept constant. Thus we could also enhance the mean wavelength stability by allowing appropriate constant feedback into the source.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.352-359
• /
• 1996

Stabilities of purple sweet potato (PSP) anthocyanin pigment on pH, sugars, organic acids, metal ions, ascorbic acid and light were investigated to provide the basic information for utilization of PSP as a potential source of anthocyanin pigment. pH has a marked influences on the color of the PSP anthocyanin solution; i.e., at low pH the color of PSP was more intense and stable. It showed characteristic bathochromic shift as the pH of the solution increased. Among the sugars tested, glucose showed a protective effect on the color of PSP pigment to raise the color intensity and stability, while sucrose and fructose showed an adverse effect. Addition of organic acids greatly increased the stability of PSP anthocyanin pigment. Citric acid was found to be the most effective followed by malic. tartaric, and succinic acids. Most metal ions except $Al^{3+}$ and $Cd^{2+} were found to be detrimental effect on the stability of PSP pigment. Ascorbic acid degraded PSP pigment considerably, and had a synergistic effect with oxygen on the pigment degradation. The effect of light on PSP pigment was found to be very deleterious. The pigment degradation can be minimized by shielding the light from the pigment solution.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.47-53
• /
• 2012

Recently, by the increasing of data transmission rates, PCB is required high-speed data transmission rates and thin packaging. So optical PCB which is the combination of electrical layer and optical layer can be one of the solution to overcome the limitations of conventional electrical PCB. The most important factor in the implementation of optical PCB is optical interconnection. So the research on high-efficiency and passive alignment has been active. In this paper, we suggest built-in lens pluggable waveguide and we simulate its coupling efficiency and structural stability. Optical simulation results show that the proposed structure has higher efficiency than no lens structure about 1.86 times in transmitter and about 1.42 times in receiver. In structure simulation, inner lens has no damage in desorption process. Therefore, we shown that the proposed structure has a high coupling efficiency and structural stability.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2002.03a
• /
• pp.27-36
• /
• 2002

• NICE (News & Information for Chemical Engineers)
• /
• v.33 no.6
• /
• pp.693-702
• /
• 2015

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.250-251
• /
• 2003

여러 광기록 매질 중 아조(azo)계열의 색소를 첨가한 고분자 필름은 색소의 선택에 따라 원하는 감광 파장대를 선택할 수 있는 특징과 뛰어난 메모리 휘발성, 편광 선택이 가능한 점, 높은 환경적 안정성 때문에 1986년 Todorow 그룹이 아조색소를 함유한 고분자 필름의 광유도 비등방성에 관한 논문을 발표한 이래 많은 연구가 이루어지고 있다. 아조계열 색소분자는 PVA 고분자 매트릭스(matrix)속에서 trans 혹은 cis이성질체 중 하나의 상태로 존재할 수 있으나 trans 상태는 cis 상태보다 안정한 상태이므로 광이 없을 때는 대부분 trans 상태로 존재하게 된다. (중략)

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.621-623
• /
• 2008

태양광/풍력복합발전시스템은 친환경에너지원의 대표적인 복합발전시스템이다. 본 논문에서는 복합발전시스템을 하나의 DC링크에서 안정적으로 연결하기 위해 슈퍼캐패시터를 도입하여 발전된 전력의 배터리 충전매체로 활용하여 시스템의 안정성으로 높이고 충방전효율을 증가시키고자 하였다.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.39-45
• /
• 2000

The stability of vitamin A, $B_1,\;B_2,\;B_6$, C in aqueous multivitamin solutions was carried out by means of estimation of reaction velocity and the results are described in this paper. The stability of vitamin A, $B_1$ and C due to thermal degradation method in aqueous multivitamin solutions was evaluated at 40, 50, 60 and $70^{\circ}C$ up to 40 days. The shelf-lives of vitamin A, B₁ and C in this preparation, calculated using the Arrhenius equation, were 1493, 449 and 639 days at $25^{\circ}C$ respectively. Examination was made on the effect of initial concentration of vitamin $B_2$$(C_0)$ on light fading of vitamin $B_2$ in aqueous multivitamin solutions and it was found that the fading progressed according to the following formula : $-{\frac {dc}{dt}}=K_c\;{\frac C{C_0}}$ where Kc is apparent light-fading rate constant relate to $C_0$. Photodecomposition of vitamin $B_6$ in aqueous multivitamin solutions was apparently first order kinetics and was stable in polyethylene>brown color>glass container to sunlight. Photodecomposition of vitamin $B_6$ in four seasons also investigated.