• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.420-424
• /
• 1999

In this paper, an optical switching circuit and several types of all-optical transmitter/receiver circuits which are configured with photodiodes, multiple quantum-well(MQW) optical modulators, and field-effect transistors(FETs) were simulated using PSPICE and their results of these are examined and discussed. 20 $\mu\textrm{m}$ ${\times}$ 20 $\mu\textrm{m}$ of window size was used for the optical modulators and 100 $\mu\textrm{m}$ wide FETs with the transconductance value of 55 mS/mm were used for the simulations. Simulation results clearly show that in order for the high speed operation of the all-optical circuits, the size of each device should be minimized to reduce the parasitic capacitance, the circuits should be designed to operate at the wavelength where the resposivity of photodiodes becomes the maximum peak, and the use of short, high-intensity input optical signal beams is very advantageous.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.674-681
• /
• 2000

We proposed polymer based vertical asymmetric optical coupler. And we optimized the proposed device by coupling characteristic analysis In 1.33um wavelength, TE mode, we obtained very short coupling length(L=277.6um), high coupling efficiency(94%). The merits of proposed device are low propagation loss due to very short full device, low production cost and time, and high integrated fabrication. We will use this to fabricate optical switch, modulator and tunable WDM devices, etc.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.262-263
• /
• 2002

오늘날 정보화 사회가 세계적으로 구축됨에 따라 초고속 광네트워크 사이의 통신용량의 급격한 증가로 인하여 대용량의 정보를 초고속으로 처리할 광스위치의 필요성이 심각하게 대두되고 있다.[1] 현재 연구되고 있는 광스위치 중에는 광도파로 형테와 MEMS형, 기계식 형태가 있다.[2] 그러나 이들 형태의 광스위치는 대용량과 초고속이라는 두 개의 기능을 동시에 수행하기에는 기술적 어려움이 있다. (중략)

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.221-227
• /
• 1999

이논문은 자동차용 휴즈박스 조립과정 가장 난이도가 높은 리셉타클의 자동으로 조립하는 것으로써 기존 시스템은 휴즈를 회로기판에 개별로 수작업으로 삽입하여 스위치의 수동조작에 의해 압입하여 조립하였으나 이를 각 모델별로 자동 공급피더에서 개별적으로 광센서의 신호를 받아 자동으로 공급하는 장치로서 생산성을 대폭 향상시킨 섯이라 할수있다.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.158-161
• /
• 1999

This Paper proposes the architecture of WDM(wavelength division multiplexed) based large scale photonic packet switch network, which is composed of the FC(frequency converter) and OM (output module). The features of the proposed WDM based photonic packet switch network are 2-stage switch network, and WDM based internal optical link that is connected between FC and OM. This paper evaluates the internal call blocking characteristics of the photonic packet switch network. In results, we confirmed that the proposed WDM based photonic packet switch network has the potentiality in the practical implementation.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1261-1263
• /
• 1997

Two kinds of optically-triggered p-i-n switches with planar and V-groove structures have been fabricated with gold-doped silicon. The V-groove device exhibits a higher threshold voltage and is more sensitive to light. The minimum optical power indicates that a certain minimum illumination is required to optically turn on the silicon p-i-n devices.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.78-79
• /
• 2013

본 논문에서는 태양광 및 리튬 이온 배터리를 에너지원으로 하는 계통 연계 시스템을 효과적으로 구성하기 위해 스위치 손실을 그 기준으로 삼았다. 따라서, 두 가지 종류의 회로구성에 대해 손실 예측 비교를 사용하였다. 전력 반도체의 스위칭 손실 및 도통시 전류, 전압 관계를 모델링 하였고 시물레이션을 이용해 손실 예측을 하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.287-287
• /
• 2004

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.9-17
• /
• 2020

Recently, RES (renewable energy source) projects have been spreading all over the world as an alternative to solve the shortage of energy and environmental problems caused by fossil fuel consumption. The Korean government also supported the policy and demonstration project to increase the proportion of renewable energy to 63.8[GW] until 2030, which is 20[%] of the total power generation. On the other hand, output loss of a PV array can occur when the surrounding high-rise buildings and trees shade a PV array. Therefore, this paper proposes an algorithm to improve the output loss of a PV array, which electrically changes a circuit configuration of PV modules by wiring and switching devices. Furthermore, this study modeled a PV system based on PSIM S/W, which was composed of a PV array, a circuit configuration device, and a grid-connected inverter. From the simulations results with the modeling and test device, the existing method showed no output when 50% of the shade occurs in PV modules. In contrast, the proposed method could produce the output because the voltage in the PV module could be restored to 246[V], and the operation efficiency of the PV system could be improved by the operation algorithm of the circuit configuration device.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.347-348
• /
• 2016

본 논문에서는 차동전력조절기회로가 적용된 승압형 태양광 차지펌프 플라이백 전하 균등화 회로를 사용하여 연속 모드로 동작하는 전하 균등화 방법을 제안한다. 이 컨버터는 차동전력조절기회로의 입력부에 커패시터가 병렬로 연결되어 있어서 포워드 컨버터가 아닌 벅 컨버터로 동작을 한다. 이로 인하여 기존 포워드 컨버터가 갖고 있는 동작 한계점을 극복할 수 있다. 즉 차동전력조절기회로의 듀티 비가 부스트 회로의 듀티 비 보다 작을 필요가 없다. 또한 실제 현장에 적용할 때 문제가 되는 긴 라인으로 인한 기생 인덕턴스 발생 시 차동전력조절기회로의 스위치에 큰 스파이크가 발생 할 수 있는데 이를 커패시터가 흡수하는 장정을 갖는다.