• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.22-28
• /
• 1992

This paper is studied about the method to measure the fine scratches on the mirror surfaces, such as the silicon wafer and magnetic memory disk by the optical measuring method. The theoretical background of this analysis is based upon the light scattering theory developed by Beckmann. In this analysis, the roughness in fine scratches is not considered because the aberage roughness is very small compared with the size of fine scratches. Empasis is on quantilaive method of fine scratches by non-contact method. Experiments are followed by the image processing system attached to the CCD Camera. As a results, I propose the new method to measure the size of the fine scratches from the parameters obtained by the computer simulation and experiments.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.259-264
• /
• 2005

This paper have derived an expression(the fringe modle is used) for the photocurrelation-correlation function for a cross-beam laser velocimeter, taking into account the effects of atmospheric turbulence on the amplitude and phase of the incident beams. the result, as long as the atmospheric disturbances do not greatly damp out sinusoidal variations of the photocurrent-correlation function in the time it takes a particle to travel the fringe-separation distance, the disturbances do not hinder the determination of the velocity of the partides from the correlation funtion.(the scattering particles are assumed to have a well-defined V).

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.57-64
• /
• 2007

In the paper, considers the design of a detection system, consisting of n identical detectors, to process the sum of spatially invariant signal fields $S_\jmath(t)$, an additive, homogeneous, spatially isotropic (in the array plane x). covariance_separable, and zero_mean Gaussian random noise field n(t, x). consisting of arrey receivers for use in optical communication through optimum turbulence atmosphers and covriance_circuit, staistical analysis through detection the maximum gain are compared with analysis theoretical analysis theoretical value and get through experimental measured value, as well the measured valus are confirmed to agreement joint Gaussian theoretical curves.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.103.2-103.2
• /
• 2011

비정질 실리콘 태양전지의 효율을 증가하기 위하여 많이 사용되는 방법 중 하나는 입사되는 빛의 산란을 증가하여 태양전지의 광흡수를 증가시키는 방법이다. 이를 위하여 양극전극으로 사용되는 TCO층의 일정한 패턴 처리를 통하여 광산란을 증가시키는 방법이 사용되고 있다. 본 연구에서는 나노 임프린트 리소그래피방법을 사용하여 Ag 나노로드를 증착한 기판을 제조하고 이를 비정질 실리콘 태양전지에 적용하였다. 실험결과, 그림과 같이 높이와 너비가 300nm 정도로 일정한 패턴의 Ag 나노로드를 제조하였다. 또한, 그 위에 증착된 Si 박막의 경우, 나노로드 전체를 감싸는 돔 형태로 성장하였다. 이와 같은 나노로드 위에 substrate n-i-p 구조의 비정질 박막 태양전지를 증착하고 그 특성변화를 분석하고자 하였다.

• Solar Energy
• /
• v.10 no.1
• /
• pp.57-62
• /
• 1990

The influence of substrate materials on the thermal stability of black chrome coating was investigated by Rutherford backscattering spectrometry(RBS). In order to study thermal degradation the sample were annealed in air for 24 hour at temperature of 450. Cu, Ni, and S.S(Stainless steel 304) were used as substrate for selective coating. The experimental results of substrate diffusion was discussed. It was found that little diffusion of substrate material occurred for the sample pre. pared on stainless steel.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.38-44
• /
• 1984

Subnanosecond optical pulses with 0.8-1.Bum wavelength are generated by experimentally realizing a single pass fiber Raman laser. This fiber Raman laser is pumped by a mode-locked and Q-switched Nd-YAG laser. Two wave sum frequency phenomenon is also obsenred in the course of the experimental work. The fiber Raman laser is then used to measure dispersion characteristics of a sin\ulcorner mode fiber in the long-wavelength lesion.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.79-83
• /
• 2003

Multi-port($2{\times}2$port, 1port) rectangular waveguide discontinuity problem has been analyzed by use of $TE^x_{mn}$ (mono)mode matching method. Matrix size can be reduced significantly in comparison with $TE_{mn}&TM_{mn}$(full-wave)mode matching method. the present results is compared with those by CST MicroWave Studio to validate the presint method.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.107-108
• /
• 2015

본 논문의 목적은 먼지 감지 센서, 우적 센서, 조도 감지센서와 자동 장치를 창문에 부착하고 Arduino에 연결하여 외부 환경에 따라 자동으로 창문을 여닫도록 하는데 있다. 입사광의 산란 검출을 기반으로 하는 먼지센서, 비가 내리는 양에 따른 저항 값의 변화를 감지하는 우적센서, 빛의 밝기에 따라 저항 값이 바뀌는 조도 감지 센서를 제어용 컴퓨터인 아두이노에 연결하여 데이터를 입력 받도록 한다. 사용자의 설정에 따라 입력 받은 데이터를 이용하여 창문의 여닫음을 결정하고 이를 창문에 부착한 자동장치를 통해 능동적으로 구현한다. 본 연구를 통해 사용자의 편의성을 향상시킬 수 있으며 나아가 냉난방기 사용을 줄여 에너지를 절약하는 효과를 기대한다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.435-436
• /
• 2001

대기 중 에어로졸 입자의 크기 분포를 측정하는 기기 중 광학적 입자 계수기(Optical Particle Counter)는 0.3$\mu\textrm{m}$에서 25$\mu\textrm{m}$ 사이의 입자의 크기를 개개의 입자에 대한 산란광의 강도를 측정하여 그 강도와 미리 정해진 강도와의 관계에 의해 입자의 크기를 추정한다(Chun et al., 2001). 본 연구에서는 2001년 4월 제주 고산에서 실시된 ACE-Asia(Asian Pacific Regional Aerosol Characterization Experiment) 집중 관측 기간 중 광학적 입자 계수기(Optical Particle Counter; HIAC/ROYCO 5230)를 이용하여 측정한 이 기간 중 에어로졸 입자의 크기 분포의 특성을 황사시와 비황사시, 그리고 강수시와 비강수시로 나누고 그 특징을 비교하여 보았다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.464-468
• /
• 1996

To evaluate the surface integrity of machined products such as die, the surface roughness measurement is being much used. Especially, for machining automation and promotion of productivity, the surface roughness measurement technique changes from sepatate measuring system after machining process to the on-the-machine measurement. This study is on the surface roughness measurement by using scattered lights for on-the-machine measurement. This system is designed with a simple optical construction. And experiments are implemented with standard roughness specimen to obtain the parameters which are specularly reflected region parameter and diffusely reflected region parameter. To determine the surface roughness quickly, neural network is used. And this system gives the possibility to apply to the various production processes.