• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1303-1311
• /
• 1988

Described is method for development of an optical roughness measurement sensor for in-subequality assurance in the precision grinding. Main approach is made based upon the Brckmann's light scattering theory, in which general solutions of the optical scattering behaviour are given under many simplifying assumptions on the model of the surfaces illuminated. For the ground surface, the assumptions are verified through computer simulation and experimental work in order to examine the validity of Beckmann's theory on predicting the optical responses according to the roughness variation. As a result, an optical monitoring strategy is derived which can evaluate the roughness value of the ground surface by statistically detecting the pattern of intensity distribution of the scattered light. Finally, the strategy is proven by comparing with the results using the stylus method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.395-396
• /
• 2019

표적 암세포 또는 마이크로미터 단위 이하의 미세 입자의 검출하기 위해 다양하게 사용되는 유세포분석기는 레이저와 같은 특정 파장의 광원 및 파장대별 선택이 가능한 필터, 고성능 광탐지기로 구성되어있다. 이 분석기는 표적물질의 광학적 산란특징에 기인하여 입상도와 크기, 농도 등의 물리적 정보제공이 가능하나, 고가이며 사용자의 요구에 따른 다양한 광원 및 필터의 선택이 제한적이라는 단점을 가지고 있다. 본 논문에서는 상용화된 마이크로컨트롤러, 발광다이오드, 광검출기와 필름형식의 광학필터를 사용하여 저가의 표적 암세포 검출기를 개발하고자 한다. 또한, 3D 프린터를 사용하여 사용자의 필요에 따른 설계변화와 이동이 용이하므로, 공간의 제약을 받지 않고 다양한 분야에 적용이 가능하다. 제안된 검출기의 광감지 수치는 세포의 농도에 따라 높은 선형성을 보였으며, 세포수량기를 사용한 결과 값과 비교하였을 때 무의미한 통계학적 차이를 보였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.507-507
• /
• 2013

유리기판으로 투과되는 빛들 중에는 내부 전반사나 wave-guided mode로 인하여 손실이 일어나 일반적으로 20%의 광추출 효율을 가진다. 이러한 문제점을 해결하기 위한 연구에는 Photonic Crystal과 같은 주기적인 나노 구조물이 있는데 이러한 구조물을 제작하기 위한 마스크 공정 과정은 대부분 복잡하거나 비싼 단점이 있다. 이에 본 발표에서는 마스크 없이 비정질소다라임 유리의 구조물 생성으로 광 추출 효율이 상승하는지 보고자 하였다. M-ICP (Magnetized-Induced Coupled Plasma)란 용량 결합형 플라즈마와 유도 결합형 플라즈마 두 가지 방식의 플라즈마를 이용한 것인데 용량 결합형 플라즈마를 이용해 이온이 sheath에 의해 가속되어 유리표면에 부딪히고 그에 따라 유리가 식각되는 물리적 식각을 이용하였다. 또한 이온의 밀도를 조절하기 위해 유도결합형 플라즈마 방식을 이용하여 식각률을 높였다. 화학적 식각을 위해서는 CF4와 O2혼합 가스를 이용해 F가 Si와 결합하여 SiF4가 되어 사라지고 탄소잔여물인 C는 O2와 반응하여 제거하였다. 그 결과, 랜덤한 분포를 가지는 미세한 구조물(stochastic sub-wavelength structure)을 유리 표면에 형성할 수 있었고, 또한 다양한 가스 종류와 압력, source power와 bias power, 그리고 시간을 바꿔가며 미세 구조물들을 관찰하였다. 실험 결과, 가시광선 파장 이하의 높이를 갖고 수 마이크로미터의 너비를 갖는 구조물이 전반사되는 빛을 효율적으로 추출하는 것을 산란되는 빛의 정도인 diffusive transmittance 가 기존 0%에서 15% 정도로 증가하는 것으로 스펙트로포토미터 측정을 통해 확인하였다. 이러한 유리 기판 위 구조물 생성방법을 OLED에 적용한다면 적은 비용으로 소자의 효율을 크게 향상 시킬 수 있을 것이다. 또한 본 처리 과정의 장점은 기존의 방법에 필요한 스퍼터링이나 RTA 처리 과정이 필요 없어 공정 단가 절감과 제조 공정의 단순화로 높은 생산성을 얻을 수 있으며 대면적화에도 유리하다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.263-267
• /
• 2013

In this research, a novel optical measuring methodology for the measurement of oil thickness in seawater is suggested by evaluating the light absorption which is occurred in the process of penetrating through oil layer on seawater. Laser having monochromatic wave is used as a light source and photodiode which can convert the intensity of the light into an electrical signal is applied to measure the intensity of the penetrating light through the oil-water mixtures. In the experiment, bunker C and lubricating oil are used, and three different lasers having different wavelengths are applied and compared for the selection of an optimal light source. As a result, it is observed that in the case of blue laser, the intensity of the light on the optical sensor decreases with an increase in the oil thickness. Through this relation, both the presence of oil and the thickness of oil can be determined.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.46-53
• /
• 2015

Visible Light Communication (VLC) is effective way to realize the light device and communication device using a Light Emitting Diode (LED) simultaneously. VLC has high security for Field Of View (FOV) communication area, also which is possible to transmit the high data rate using visible light. In VLC, transmitting the divided data by the RGB channels is higher data rate than transmitting the same data by RGB channels. However, it occurred the burst error by scattering and reflection of visible light which is impossible to restore that. To solve the problem, we proposed the 2-step interleaving scheme that high data rate and improve the performance of BER in VLC. The proposed system implements cyclic interleaving and convolutional interleaving that is able to be standardized the performance of RGB channels and improve the performance of BER using error correction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.804-806
• /
• 2004

As a noninvasive imaging meathod, optical coherence tomography system has been extensively studied because it has some advantage such as imaging of high resolution, low cost, and compace size configuration. The optical power of the sample signal reflected from an object is usually very small in optical coherence tomography(OCT) due to absorption and scattering in a sample material. Furthermore, there happens a serious loss of sample signal power in a fiber coupler because it does not transfer to a photodetector but return to the optical source. In order to improve the SNR of OCT system, basic Michelson and Mach-Zehnder interferometer types were configured then, we compared simulation with measurement of reference sample Therefore, an On in configuration of Math-Zehnder interferometer was demonstrated in order to improve the signal to noise ratio

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.3
• /
• pp.243-252
• /
• 1985

The mechanism of reproductive cycle of longchin goby Chasmichthys dolichognathus was investigated for the annual variations of gonadosomatic index(GSI), histological changes of gonad, reproductive cycle, and initiating and terminating factors of the breeding season. The experimental fish were captured in the tide pool of Tongbaeksom, Pusan, Korea from February 1983 to September 1984. Experimental fish for the study of initiating and terminating factors of the breeding season were maintained in filtered recirculating aquariums and exposed to various temperature and photoperiod regimes. The ovary is a pair of sac-shaped organ, and the testicular structure is tubular and it is connected to the seminal vesicle which is located at the posterior end of the testis. GSI began to increase from February when the water temperature began to increase and reached peak in April. It began to decrease from August, the top water temperature season, and maintained relatively low values until January. The annual reproductive cycle includes successive six developmental stages : early growing from December to February, late growing from January to March, early mature from February to May, late mature and ripe from March to August, spawning from April to July, degeneration and resting stage from May to December. An experimental study based on the reproductive cycle of this species indicated that rising temperature under long photoperiod during spring stimulated gonadal maturation, whereas terminating factor of the breeding season with recrudescence of the gonads was demonstrated as high water temperature during summer regardless of photoperiod.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2014

This study reviewed an application of water quality estimation using an Airborne Hyperspectral Imagery (A-HSI) and tested a part of Han River water quality (especially suspended solid) estimation with available in-situ data. The estimation of water quality was processed two methods. One is using observation data as downwelling radiance to water surface and as scattering and reflectance into water body. Other is linear regression analysis with water quality in-situ measurement and upwelling data as at-sensor radiance (or reflectance). Both methods drive meaningful results of RS estimation. However it has more effects on the auxiliary dataset as water quality in-situ measurement and water body scattering measurement. The test processed a part of Han River located Paldang-dam downstream. We applied linear regression analysis with AISA eagle hyperspectral sensor data and water quality measurement in-situ data. The result of linear regression for a meaningful band combination shows $-24.847+0.013L_{560}$ as 560 nm in radiance (L) with 0.985 R-square. To comparison with Multispectral Imagery (MSI) case, we make simulated Landsat TM by spectral resampling. The regression using MSI shows -55.932 + 33.881 (TM1/TM3) as radiance with 0.968 R-square. Suspended Solid (SS) concentration was about 3.75 mg/l at in-situ data and estimated SS concentration by A-HIS was about 3.65 mg/l, and about 5.85mg/l with MSI with same location. It shows overestimation trends case of estimating using MSI. In order to upgrade value for practical use and to estimate more precisely, it needs that minimizing sun glint effect into whole image, constructing elaborate flight plan considering solar altitude angle, and making good pre-processing and calibration system. We found some limitations and restrictions such as precise atmospheric correction, sample count of water quality measurement, retrieve spectral bands into A-HSI, adequate linear regression model selection, and quantitative calibration/validation method through the literature review and test adopted general methods.

• Publications of The Korean Astronomical Society
• /
• v.23 no.2
• /
• pp.31-35
• /
• 2008

We present analytical approximations for calculating the scattering and escape of non-ionizing photons from a plane-parallel medium with uniformly illuminated by external sources. We compare the results with the case of a spherical dust cloud. It is found that more scattering and absorption occur in the plane-parallel geometry than in the spherical geometry when the optical depth perpendicular to the plane and the radial optical depth of the sphere are the same. The results can provide an approximate way to estimate radiative transfer in a variety interstellar conditions and can be applied to the dust-scattered diffuse Galactic light.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.154.1-154.1
• /
• 2016

ITER 내부 플라즈마 진단에 대한 연구는 활발히 이루어지고 있다. 그 중에서도 광학 시스템을 이용한 진단방법으로 OES, Bolometer, Stark effects, Thomson scattering이 주로 연구되고 있다. 이러한 방법을 구현하기 위해서는 핵융합로 내부에 first mirror 설치가 필수적이다. 그러나 노 내부에서 발생한 플라즈마에 의한 부식과 증착 및 광 소스에 의한 first mirror 표면 손상이 현재 ITER 주요 난제중 하나로 꼽히고 있다. 이는 추후 건설될 DEMO와 핵융합로 건설을 위해서도 필요한 연구이다. 그러나 국내에서는 이러한 연구가 거의 진행되고 있지 않다. 이에 따라 Thomson scattering 진단계와 first mirror 관련 연구동향을 추적하였다. 그리고 이 추적한 결과를 바탕으로 감마선환경에서 first mirror의 특성을 분석했다. 또한 오염 제거 및 방지를 위하여 TE(thermos-electric) 시스템을 제작하고 있다. 그리고 high energy neutral beam에 대한 플라즈마를 이용한 오염방지 실험을 진행하고 있다.