• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.189-192
• /
• 2008

A styrylpyrylium salt (DHSP) was synthesized and then photodimerized to obtain a cyclobutane-type dimer (DHSP dimer). Methacryloyl group was incorporated into DHSP dimer to obtain DMSP dimer. Based on FT-IR analysis of a crosslinked DMSP dimer, it was considered that the cyclobutane structure reversed to styryl C=C bonds upon crack formation. Fluorescence measurement of DHSP in solid state (excitation at 385 nm) showed emission centered at 626 nm, while DHSP dimer revealed very weak emission. Fluorescent emission from microcracks in a film of crosslinked DMSP dimer was observed upon exposure to $330{\sim}385\;nm$ light.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.523-529
• /
• 2023

In order to achieve excellent spatial resolution, very small scintillation pixels are used in detectors of positron emission tomography for small animals. However, by using these very small scintillation pixels, scintillation pixels at the edge of the array may overlap in a flood image. To solve this problem, a light guide capable of changing the distribution of light was used. Depending on the material of the light guide, the light spreading tendency is different, and accordingly, the presence or absence of overlapping is different depending on the material of the light guide used. In this study, instead of the conventional glass light guide, a detector using the same material as the scintillation pixel was designed. A scintillator light guide has a higher refractive index than a glass light guide, so the light spread is different. Flood images were acquired to evaluate the degree of separation of the scintillation pixels at the edge of the detector using the two light guides. The degree of separation was evaluated by calculating the distance between the center and the spatial resolution of the image of two scintillation pixels at the edge of the obtained flood image. As a result, when the scintillator light guide was used, better spatial resolution was shown, and the distance between centers of scintillation pixels was wider. When a detector is constructed using a scintillator light guide instead of a conventional glass light guide, it is possible to use a smaller scintillation pixel, thereby securing better spatial resolution.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.259-264
• /
• 2005

Measurements of heat release are very important for controling combustion instabilities, which are closely connected with combustion instabilities. $OH^{\ast}$ images were acquired through a ICCD in this study, which were in use as indicating index of the reacting region, global and local heat release rate in the lean premixed combustion. The objectives of this study are to see the effect of equivalence ratio on global heat release rate and local Rayleigh index distribution. The local Rayleigh index distribution was acquired by information from central section of flame. This information was from the line-of-sight images which were inverted by the Abel de-convolution. In each condition, the mean value of heat release increased exponentially with equivalence for a periodic time. Local Rayleigh index distribution cleary showed the region of amplifying or damping the combustion instability as the equivalence ratio increased. This could provide an insight on the region of combustion instability and the structure of flames on the equivalence ratio.

• Composites Research
• /
• v.22 no.6
• /
• pp.45-51
• /
• 2009

The marginal integrity at the composite resin-tooth interface has been analyzed in real time through acoustic emission (AE) monitoring during the polymerization shrinkage of composite resin subjected to the light exposure. It was found that AE signals were generated by the polymerization shrinkage. Most AE hit events showed a blast type signal having the principal frequency band of 100-200kHz. Bad bonding states were indicated by many hit events in the initial curing period of 1 minute with high contraction rate. The quantity of hit events for the human molar dentin specimen was much less than that for the steel ring specimen but more than that for the PMMA ring specimen. The better the bonding state, the less the AE hit events. The AE characteristics were related with the tensile crack propagation occurring in the adhesive region between the composite resin and the ring substrate as well as the compressive behavior of the ring substrate, which could be used for a nondestructive characterization of the marginal disintegrative fracture of the dental restoration.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.216-217
• /
• 2003

마이크로프로세서의 전송대역 증가와 함께 요구되어지는 집적형 광자기술은 좁은 영역에서 복잡한 광 배선들을 나열함에 따라 기존의 Electrical Interconnection들의 전자기적 분산이나 방출에 의한 결함 문제를 극복함으로써, 높은 전송 효율을 갖는 Optical Interconnection을 구현 할 수 있게 되었다. 그러나 집적화시 고려되는 배선들 간의 상호 연관성과 효율적인 특성이 문제시 되는데 이를 위한 경향성과 최적화 요소들이 필요하게 되었다.(중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.32.2-32.2
• /
• 2010

본 연구에서는 고출력, 고휘도를 위해서 개발되고 있는 수직형 LED소자의 광출력향상을 위한 나노 패터닝 공정을 진행하였다. 수직형 LED는 기존 측면형 LED에 비해서 열방출 특성이 우수하고 대면적 칩으로 제작이 가능하기 때문에 높은 광출력이 필요한 조명 분야로의 적용이 가능하다. 하지만 수직형 LED 역시 기존 측면형 LED와 마찬가지로 질화갈륨 및 외부 공기와의 계면에서 전반사가 심하기 때문에 광추출효율이 낮은 문제점이 있으며 이를 해결하는 것이 큰 이슈가 되고 있다. 이를 해결하기 위해서 광결정 패턴을 LED 소자에 형성하여 광추출효율을 향상시키려는 연구가 활발히 진행되고 있으나 아직까지 수직형 LED 웨이퍼 전면적에 균일한 패턴을 형성할 수 있는 기술 개발이 미진한 상황이다. 본 연구에서는 유연 고분자 몰드를 이용한 대면적 나노 임프린팅 및 나노 프린팅 기술을 통해서 2 inch 수직형 LED 웨이퍼 전면적에 균일한 패턴을 전사하는 공정을 진행하였다. 구체적으로는 나노임프린트 및 건식식각 공정을 통해서 수직형 LED의 n형 질화갈륨 층에 높은 가로세로비의 광결정 패턴을 형성하였으며 이를 통해서 약 40% 정도의 광출력이 향상되었다. 또한 고 굴절률의 산화아연 나노 패턴 형성공정을 대면적 LED 기판에 시도하였다.

• Electrical & Electronic Materials
• /
• v.15 no.12
• /
• pp.11-18
• /
• 2002

전계 방출 디스플레이(Field Emission Display : FED)는 금속 또는 반도체로 만들어진 극미세 구조의 전계 에미터(field emitter)에 전기장을 인가하여 진공 속으로 방출되는 전자를 형광체에 충돌시켜 화상을 표시하는 디스플레이 소자로서, 원리적으로 브라운관(CRT)의 우수한 표시 특성을 그대로 가지면서 경량 박형화가 가능하기 때문에 'Thin CRT'라고 불리기도 한다 FED는 원리적으로 고휘도, 저소비전력, 빠른 응답속도, 광시야각, 고해상도, 우수한 칼라 표시. 넓은 사용온도 범위 등 CRT 및 평판 디스플레이의 장점을 모두 갖추고 있는 이상적인 디스플레이 소자로 평가되어 1990년대 초반부터 세계 유수의 연구 기관들이 본격 적 인 연구 개발을 추진하여 왔지만, 아직까지 평판 디스플레이 시장에 진입 할 만큼 기술 개발이 이루어지지 못하고 있다. 본 고에서는 FED의 근간이 되는 전계방출 소자의 원리 및 종류, FED의 핵심요소 기술, 최근 연구 개발 동향, FED의 응용 분야 및 상용화 가능성 등에 대하여 살펴보기로 한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.42.2-42.2
• /
• 2011

2010년 10월 28일 근일점을 통과한 103P/Hartley 2 혜성의 분광학적 특징을 연구하고자 11월 6일과 11일 양일간 보현산 천문대의 고분산 에셀 분광기 BOES(R~30,000)로 관측을 하였다. 우리는 Hartley 2 혜성의 고분산 분광자료를 Hwang et al.(2009)의 Machholz(C/2004Q2)혜성 가시광 영역($4800{\sim}8100{\AA}$) 고분산 분광 자료와 비교 분석하였고 그 결과 C2, CN, NH2,H2O+의 방출선 뿐만 아니라 다수의 미확인 분광선을 발견하였다. 또한 발견된 미확인 분광선을 설명하기 위하여 향상된 NH2방출선과 OH 방출선 등의 후보 물질을 이용하여 미확인선의 원인 물질을 제시하고자 한다. 이 발표에서는 지금까지의 분석 결과를 소개한다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

In order to acquire an image in a positron emission tomography, it is necessary to draw the position coordinates of the scintillation pixels of the detector module measured at the same time. To this end, in a detector module using a plurality of scintillation pixels and a small number of photosensors, it is necessary to obtain a flood image and divide a region of each scintillation pixel to obtain a position of a scintillation pixel interacting with a gamma ray. Alternatively, when the number of scintillation pixels and the number of photosensors to be used are the same, the position coordinates for the position of the scintillation pixels can be directly acquired as digital signal coordinates. A method of using a plurality of scintillation pixels and a small number of photosensors requires a process of obtaining digital signal coordinates requires a plurality of photosensors and a signal processing system. This complicates the signal processing process and raises the cost. To solve this problem, in this study, we developed a method of obtaining digital signal coordinates without performing the process of separating the planar image and region using a plurality of flash pixels and a small number of optical sensors. This is a method of obtaining the position coordinate values of the flash pixels interacting with the gamma ray as a digital signal through a look-up table created through the signals acquired from each flash pixel using the maximum likelihood function. Simulation was performed using DETECT2000, and verification was performed on the proposed method. As a result, accurate digital signal coordinates could be obtained from all the flash pixels, and if this is applied to the existing system, it is considered that faster image acquisition is possible by simplifying the signal processing process.