• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.47-54
• /
• 1985

An investigation was made to find regional differences and seed characteristics of buckwheats collected from 36 areas in Chungnam province in 1984, and the results obtained are summarized as follows; 1. Grain types of the collected buckwheats were classified as winged, semi-winged and common types. All collections were on the average composed of 50.1 % of common grain types, 26.8 % of semi-winged type and 23.1 % of winged types, respectively. However, there was a great regional difference in components of each grain type among collections. 2. The mean 1000 grain weight was 24.9 gr. The regional differences in 1000 grain weight showed that a collection (collection no. 30) from Susan was 17.4 gr and a collection (collection. no. 16) from Suchon was 31.9 gr. There wasn't any significant relationship between grain types component and 1000 grain weight. 3. Germination of seeds was accelerated as temperature goes up from $5^{\circ}C$ to $30^{\circ}C$. However, interesting germination pattern was observed. That is, seeds from Suchon (collection no. 16), Hongsung (collection no. 23), Cheonweon(collection no. 35), and Yesan (collection no. 27) showed abrupt decrease of germination rate at the temperature of $15^{\circ}C$. The seeds collected from Suchon (collection no. 29), Dangjin (collection no. 32) and from Chungyang (collection no. 21) showed decrease of germination rate at $25^{\circ}C$. These seeds showed, however, the increase of germination percentage at temperature higher than $15^{\circ}C$ and $25^{\circ}C$, respectively. The germination rate for the most collections at $5^{\circ}C$ was less than 10%. However, seeds from Asan (collection no. 33) and Daeduk (collection no. 3) showed 20% and 30% of germination rate at $5^{\circ}C$, respectively. 4. Color of seed coat could be classified into two maj or colors, dark and dark brown. Based on the seed coat color and grain types, all the collections could be classified into the following six categories: winged-black, semi-winged-black, common-black, winged-dark brown, semi-winged dark brown and common-dark brown. The different light absorption rate was found within the UV light zone (190-390 nm) depending upon the two different major seed coat color.

• Journal of Veterinary Clinics
• /
• v.25 no.5
• /
• pp.330-339
• /
• 2008

Ceramide, cholesterol and free fatty acids are the major intercellular lipids, maintaining the integrity of the skin barrier. However, the roles of these lipids in canine skin barrier function are little known. The aim of this study was to evaluate the repairing effects of 2% ceramide (CER), 2% cholesterol (CHO), 2% linoleic acid (LIN) and 2% intercellular lipid mixture (ILM) on damaged canine skin barrier by 1.25% sodium lauryl sulphate (SLS). Transepidermal water loss (TEWL), skin hydration, skin pH and skin thickness were assessed. Histological profiles and transmission electron microscopic (TEM) profiles were assessed on day 12. SLS effectively induced the canine skin barrier damage. TEWL was significantly decreased by topical application of CER and ILM in SLS and vehicle-treated skin on day 8 and 12, respectively (p < 0.05, p < 0.0 I). By end of the experiment all lipids significantly decreased the TEWL as compared with SLS and vehicle control, but CER and ILM more significantly decreased the TEWL than UN and CHO, respectively (p < 0.01). Skin hydration was significantly increased by CER and ILM during experimental periods (p < 0.01). Skin pH was significantly decreased by CER, LIN and ILM. In histological profiles, the thickness of the stratum corneum (SC) was significantly increased by the SC lipids as compared with vehicle and SLS (p < 0.01). Especially, CER and ILM showed more prominent improvement of barrier recovery. In TEM of the SC, SLS induced exfoliations of corneodesmosomes in the SC, and CER and ILM effectively protected exfoliations of corneodesmosomes on SLS-damaged canine skin. These results indicated that topical application of CER and ILM dramatically improved damaged-skin barrier function by SLS. Also, it was considered that the use of CER or ILM was recommended for the management of skin barrier dysfunction by irritant and inflammatory skin disorders such as atopic dermatitis.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.546-552
• /
• 2010

Previous studies could not offer available guideline to decide size of balloon and grade of injury before induction of spinal cord injury (SCI) because grade of SCI was assessed after inserting a catheter and each experimental animal were different in body size and weight as well as in species. This study was performed to provide guideline for standardized SCI model. Eight healthy adult beagle dogs that had 8 mm of spinal canal height were assigned to four groups according to the diameter of balloon and compression time: 4 mm/3hrs, 4 mm/6hrs, 4 mm/12hrs and 6 mm/3hrs group. Radiography was performed to standardize between experimental animal and balloon before selecting balloon diameter to induce SCI. Behaviors outcomes, somatosensory evoked potentials (SEPs), magnetic resonance imaging (MRI) and histopathological examination were evaluated. Behaviors outcomes and SEPs were not available to assess grade of SCI and those only indicate SCI. The damaged area was revealed clear hyperintensity on STIR image and T2WI after induction of SCI. The hyperintense area on MRI was cranially and caudally expanded with increasing of the diameter of balloon or the compression time. Well corresponded to expanding of hyperintense area on MRI, the damaged region and the numbers of caspase-3 and PARP immunoreactive cells were increased on histopathological findings. Therefore, these results will be considered fundamental data to induce standardized SCI model in experimental animal that has various weight and size.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.522-532
• /
• 2010

The aims of the present study were to characterize the effect of glucocorticosteroids (GCs) on the normal canine skin and to evaluate the effect of a lipid mixture (LM), containing cholesterol, pseudoceramide, and free fatty acid, on the steroid-induced damaged skin of dogs. Five beagles were involved and the skin of the back of each dog was topically applied with four kinds of GCs twice daily for 28 days. LM was applied after that period of GCs application. Transepidermal water loss (TEWL), skin hydration, and skin pH were assessed during experimental periods and histopathological evaluation was performed. TEWL was significantly increased, with a maximum increase obtained on day 28 (p < 0.01). Skin pH was significantly decreased, with a maximum decrease obtained on day 28 (p < 0.01). Skin surface hydration was significantly increased on day 3, but values of skin hydration were progressively decreased and finally reached those of baseline. In histology, as results of steroid application, losses of keratin layers in the stratum corneum and edematous changes in the upper parts of dermis, and consequently, thickness of the epidermis and the stratum corneum were decreased. In addition, the numbers of hair follicles were markedly decreased in steroid control as compared to intact control. However, these skin atrophic changes were markedly inhibited by treatment of LM as compared with steroid control in the present study. Moreover, all biophysical parameters were reached to the baseline after LM treatment. These results showed that the topically applied GCs induced skin barrier impairment and a LM should be effective on repair of disturbed skin barrier function in dogs. Therefore, it is concluded that a LM tested in the present study is expected to treat the steroid-induced skin damages.

• Korean Journal of Weed Science
• /
• v.30 no.2
• /
• pp.122-134
• /
• 2010

We investigated the levels of resistance and accumulation of terapyrroles, reactive oxygen species, lipid peroxidation, and antioxidative enzymes for reasons of growth reduction in herbicide-transgenic rice overexpressing Myxococcus xanthus, Arabidopsis thaliana, and human protoporphyrinogen oxidase (Protox) genes. The transgenic rice overexpressing M. xanthus (MX, MX1, PX), A. thaliana (AP31, AP36, AP37), and human (H45, H48, H49) Protox genes showed 43~65, 41~72 and 17~70-fold more resistance to oxyfluorfen, respectively, than the wild type. Among transgenic rice lines overexpressing Protox genes, several lines showed normal growth compared with the wild type, but several lines showed in reduction of plant height and shoot fresh weight under different light conditions. However, reduction of plant height of AP37 was much higher than other lines for the experimental period. On the other hand, the reduction of plant height and shoot fresh weight in the transgenic rice was higher in high light condition than in low light condition. Enhanced levels of Proto IX were observed in transgenic lines AP31, AP37, and H48 at 7 days after seeding (DAS) and transgenic lines PX, AP37, and H48 at 14 DAS relative to wild type. There were no differences in Mg-Proto IX of transgenic lines except for H41 and H48 and Mg-Proto IX monomethyl ester of transgenic lines except for MX, MX1, and PX. Although accumulation of tetrapyrrole intermediates was observed in transgenic lines, their tetrapyrrole accumulation levels were not enough to inhibit growth of transgenic rice. There were no differences in reactive oxygen species, MDA, ALA synthesizing capacity, and chlorophyll between transgenic lines and wild type indicating that accumulated tetrapyrrole intermediate were apparently not high enough to inhibit growth of transgenic rice. Therefore, the growth reduction in certain transgenic lines may not be caused by a single factor such as Proto IX, but by interaction of many other factors.

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.136-142
• /
• 2016

Lespedeza species are mainly used for wildlife food and cover and for erosion control. The germination of these species can be enhanced after a fire occurrence in forest, which is known as fire-activated seeds to germinate. While the heat treatment could break seed dormancy of Lespedeza, its germination rate was quite low. We investigated that chemical scarification could promote germination of L. tomentosa. Seeds were soaked in 100% sulfuric acid (H₂SO₄) for 0, 1, 3, 6, 12, 24, 48, 96, 192, and 384 min, and then washed in distilled water for 24 h. Very few seeds were germinated in control (H₂SO₄ for 0 min). More than 90% of seeds were germinated in H₂SO₄ for 24, 48, and 92 min. However, some damage was observed in roots and cotyledons of seedling dipped in H₂SO₄ for a long time. To search the optimal soaking time in H₂SO₄ without defects, seeds scarified in H₂SO₄ for 30, 60, 90, 120, 150, 180, and 300 min were sown the commercial soil medium. Seeds treated with H₂SO₄ for 90 min and 150 min emerged by about 92% and 84%, respectively. Therefore, H₂SO₄ treatment could break the seed dormancy of Lespedeza species, and especially in case of L. tomentosa the optimal treatment time in sulfuric acid was one to two hours. Germination of L. tomentosa began promptly following the scarification and was completed within about one month, indicating that seeds has no physiological dormancy, just has physical dormancy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.425-426
• /
• 2013

IIIN계 물질 기반의 광 반도체는 직접 천이형 넓은 밴드갭 구조를 갖고 있기 때문에 적외선부터 가시광선 및 자외선까지를 포함한 폭 넓은 발광파장 조절이 가능하여 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있다. 일반적인 청색 및 녹색 발광영역의 활성층으로는 InGaN/GaN 다중양자우물구조를 사용하고 있으나, 장파장의 녹색 발광을 얻기 위해서는 인듐의 함유량이 증가하여야 한다. 하지만, 인듐의 함유량이 증가함에 따라서 InGaN/GaN 다중양자우물 구조내에서 인듐의 편석현상의 발생이 용이하게 되어 계면 특성을 저하할 뿐 아니라, 비발광 센터를 증가하여 발광 효율을 급격히 감소시키는 원인이 되고 있다. 또한, InGaN과 GaN의 큰 성장온도의 차이에 따라 800도 부근의 저온 영역에서 성장된 InGaN층이 1,000도 이상의 고온 영역에서 GaN층이 성장시 InGaN층의 열화 현상이 급격히 발생되고 있다. 이를 억제하기 위해서 금속유기화학증착법의 성장 변수 최적화, 응력제어, 도핑 등의 편석 억제기술 및 보호층이 사용되고 있다. 본 연구에서는 인듐함유량이 증가된 녹색 InGaN/GaN 다중양자우물구조에서 InGaN 우물층 상하부에 도입된 GaN 보호층에 따라 발생되는 양자우물구조의 광학 및 결정학적 특성 분석을 통해 GaN 보호층의 역할을 분석하고자 한다. 본 연구에서는 금속유기화학증착장치를 이용하여 사파이어 기판위에 GaN 템플릿을 성장하고, n-형 GaN, InGaN/GaN 다중양자우물구조 및 p-형 층을 성장하였다. 앞선 언급하였듯이, InGaN/GaN 다중양자우물구조내에 GaN 보호층의 역할을 규명하기 위하여 샘플 A의 경우는 보호층이 전혀 없는 구조이고, 샘플 B의 경우는 InGaN 우물층의 상단부에만, 샘플 C의 경우에는 우물층 상부 및 하단부 모두에 약 2.0 nm 두께의 GaN 보호층을 형성하였다. 이 보호층의 유무에 따른 다중양자우물구조의 계면 특성을 확인하기 위한 X-선 회절을 이용하였고, 광학적 특성을 확인하고 상온 포토루미네선스법을 이용하여 녹색 발광 파장의 변화 및 발광세기를 관찰하였다. 우선적으로, 상온 포토루미네선스법을 이용하여 각 샘플의 발광특성을 확인한 바 상하부 모두에 GaN 보호층이 존재하는 샘플 C의 경우 약 510 nm 부근에서 발광이 관찰되었지만, 상단부에 GaN 보호층이 존재하는 샘플 B는 약 495 nm영역에 발광이 확인되었다. 특히, 전혀 보호층이 존재하지 않는 샘플 A의 경우 약 440 nm에서 발광하는 현상을 관찰하였다. 이는 우물층 상단부 및 하단부에 존재하는 GaN 보호층이 In의 확산을 억제하는 것으로 판단된다. 또한, 발광파장 및 세기를 확인한 바, 보호층의 존재하지 않을수록 단파장화가 발생함에도 불구하고 발광세기는 급격히 약해지는 것으로 보아 계면특성이 저하되어 비발광센터가 증가되는 것으로 판단된다. 이를 구조적으로 확인하기 위하여 X-선 회절법을 통한 ${\omega}$/$2{\Theta}$ 스캔의 결과는 In의 0차 피크가 GaN 보호층이 없을 경우 GaN의 피크 방향으로 이동하는 것으로 보아 GaN 보호층은 우물층 성장 후 GaN 장벽층을 성장하기 위해 온도를 증가시키는 과정에서 In의 확산되는 것으로 판단된다. 또한, 하부 GaN 보호층의 경우 GaN 장벽층 성장 후 온도를 감소시키는 과정에서 성장되므로, 우물층으로부터 In의 탈착현상이 아닌 장벽층과의 상호 확산으로 판단된다. 또한, 계면특성을 확인하기 위해 InGaN의 X-선 위성 피크를 확인한 바 샘플 A의 경우 매우 넓고 약한 피크가 관찰된 반면, 보호층이 존재하는 샘플 B와 C의 경우 강하고 얇은 피크가 확인되었다. 이는 GaN 보호층의 도입으로 인해 계면특성이 향상되는 것으로 판단된다. 따라서, 우리는 InGaN/GaN 다중양자우물구조에서 GaN 보호층은 상부의 열화 억제 뿐아니라, 하부의 장벽층 및 우물층 사이의 상호확산을 억제하는 GaN 보호층의 도입을 통하여 우수한 계면 특성 및 비발광센터의 억제를 얻을 수 있을 것으로 생각되며, 이는 향후 GaN계 발광다이오드의 전계 발광특성을 증가하여 우수한 발광소자를 개발할 수 있을 것으로 기대된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2000

The degradation of humic acid using $TiO_2$ coatings was studied, $TiO_2$ coatings were prepared by dip-coating method. Sol solutions for coating were prepared by mixing the gel, which can be produced by the reaction of $TiOCl_2$ and $NH_4OH$ solution, and hydrogen peroxide solution, and hydrolysis of titanium tetraisopropoxide (TTIP). It was shown from XRD that coatings from sol aged at $100^{\circ}C$ for 18h with titanium peroxo solution were crystallized to anatase in the range of temperatures of $25^{\circ}C$ to $500^{\circ}C$. In contrast, those coated from TTIP were crystallized to anatase at temperature above $400^{\circ}C$. So the sols originated from $TiCl_4$ can be applied for not only on the heat-resistance substrates but on the plastic substrates. Thickness and the quality of the films were dependent on the withdrawing speed, the concentration of sol, and the number of coating. The films showed various interference colors depending on the thickness of them. In the case that the films coated 2 times at withdrawing speed of 2.5cm per minute by 0.2M sol, the films had a transparent light blue color with thickness of around 50nm. It was known from the result of photo-degradation by $TiO_2$ coatings using humic acid that the removal efficiency of $COD_{cr}$ was over 85% after illumination of $UV/H_2O_2$ for 40min. and that of UV/VIS absorbable materials was over 95%.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.634-640
• /
• 2017

Toxicity and fate assessment is necessary in the evaluation of the environmental, health and safety risks of engineered nanomaaterials (ENMs). Therefore, in order to ensure the reproducibility, reliability and relevance of ENMs toxicity results, stable and monomodal dispersion protocols in toxicity test media are needed. Zinc oxide nanoparticles (nZnO) are widely used in various products such as cosmetic products, paper, paints etc. In this study, nZnO dispersions in ecotoxicity test media were produced by following a series of steps of modified National Institute of Standards and Technology (NIST) Special publication 1200-5. In addition, natural organic matter (humic acid (HA)) was used as a stabilizing agent to disperse nZnO in the test media. The hydrodynamic diameters (HDD) of the nZnO in dispersion ranged between 150 and 200 nm according to the dynamic light scattering (DLS) measurement. Based on these dispersions in ecotoxicity test using ecological species (Oryzias latipes, Daphnia magna, Pseudokirchneriella subcapitata and Chironomusus riparius), dispersion protocol was found to have a considerable potential in ecotoxicity test of ENMs.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.452-459
• /
• 2006

Competition will usually develop between the opposing walls as the restorative resin shrinks during polymerization. Magnitude of this phenomenon may be depended upon cavity configuration and volume. The purpose of this sturdy was to evaluate the effect of cavity configuration and volume on microleakage of composite resin restoration that has margins on the enamel site only. The labial enamel of forty bovine teeth was ground using a model trimmer to expose a flat enamel surface. Four groups with cylindrical cavities were defined, according to volume and configuration factor(Depth x Diameter / C-factor) - Group I : 1.5 mm ${\times}$ 2.0 mm / 4.0, Group II : 1.5 mm ${\times}$ 6.0 mm / 2.0, Group III : 2.Omm ${\times}$ 1.72 mm / 5.62, Group IV : 2.0 mm ${\times}$ 5.23 mm / 2.54. After treating with fifth-generation one-bottle adhesive - BC Plus$^{TM}$ (Vericom, AnYang, Korea), cavities were bulk flted with microhybrid composite resin - Denfill$^{TM}$ (Vericom). Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Specimens were thermocycled 500 times between 5$^{\circ}$C and 55$^{\circ}$C for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}$A) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. The results were as follows: 1. Small cavity volume showed lower microleakage score than large one, however, there was no statistically significant difference. 2. There was no relationship between cavity configuration and microleakage. Factors of cavity configuration and volume did not affect on microleakage of resin restorations with enamel margins only.