• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.175-176
• /
• 2008

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.209-210
• /
• 2008

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.211-212
• /
• 2008

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.213-214
• /
• 2008

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ] was deposited by DC magnetron sputtering on glass surface under various sputtering parameters such as discharge power($0.6{\sim}5.2\;kW$, substrate temperature($R.T{\sim}350^{\circ}C$), Ar and $O_2$ flow ratio with $0{\sim}50\;sccm$($Ar+O_2$ 90 sccm) and about 1 mtorr of pressure. TiO-N thin film was prepared under same sputtering conditions for $TiO_2$ thin film except flow ratio($Ar+O_2+N_2$ 90 sccm). The sheet resistance of thin films deposited under these parameters was measured to analyze electronic characteristic and thin film's thickness(${\alpha}$-step), surface roughness(AFM) and formation construction(FE-SEM, XRD) were also measured to draw optimal sputtering parameters. In order to evaluate photo-activity of thin film($TiO_2$, TiO-N) made in optimal parameters for removal of pollutants, toluene among VOCs and Suncion Yellow among reactive dyes were chosen to probe organic compounds for photo-degradation. It was shown that the photo-catalytic thin films had a significant photo-activation for the chosen contaminants and especially TiO-N thin film showed maximum efficiency of 33% for toluene(5 ppm) removal in visible-light range.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.58-62
• /
• 2010

CNT-$TiO_{2}$ nano complexes were prepared from $TiOSO_4$ and multi-walled carbon nanotube (MWCNT) by hydrolysis. The CNTs were dispersed uniformly with anatase $TiO_{2}$ in the prepared $TiO_{2}$-CNT complexes. The increasing MWCNT ratio leads to increased crystalline carbon and O/Ti ratio. The decomposition degree of methylene blue was experienced according to UV radiation time for study adsorption and photocatalytic activity. The samples having high MWCNT ratio show high adsorption and photodegradation. The high specific surface area, functional group having oxygen, low band gap energy, high electric conductivity, high volume to surface ratio, uniform structure and properties of MWCNT assist photocatalytic activity of CNT-$TiO_{2}$ complex.

• Journal of Adhesion and Interface
• /
• v.25 no.1
• /
• pp.143-151
• /
• 2024

Organic photovoltaics (OPVs) have shown great potential as a new generation of energy harvesters because they possess many unique properties, including mechanical flexibility, lightweight, semi-transparency, and low-fabrication costs. Recent advancements in molecular structure and device engineering have led to achieving power conversion efficiency (PCE) exceeding 19%. However, these highly efficient active layer materials have been hampered in their commercialization by complex synthesis steps that result in high manufacturing costs. To address this issue, research is actively underway on low-cost active layer materials with simple structures. This paper introduces such cost-effective active layer materials and strategies for their synthesis.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.554-558
• /
• 2008

$(1-x)SiO_2-(x)TiO_2$ composite fibers with various compositions of $TiO_2$ were prepared by electrospinning their sol-gel precursors of titanium (IV) iso-propoxide (TiP), and tetraethyl orthosilicate (TEOS). The surface morphology and structure of sintered composite fibers were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) and Fourier transform infrared spectroscopy (FT-IR). As the content of $TiO_2$ in $(1-x)SiO_2-(x)TiO_2$ system was increased the average diameter of composite fibers was proportionally increased. Also, the transformation of $TiO_2$ from anatase to rutile form was inhibited by the highly dispersed $TiO_2$ around $SiO_2$ particles up to $0.6SiO_2-0.4TiO_2$ composite fibers even after calcination at $1000^{\circ}C$. The photocatalytic activity of $SiO_2-TiO_2$ composite fibers was examined for the methylene blue (MB) decomposition which was confirmed using UV-vis/DRS spectra. The experiments demonstrated that the MB in aqueous solution was successfully photodegraded using $SiO_2-TiO_2$ composite nanofibers under UV-visible light irradiation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.899-903
• /
• 2005

One of the most important volatile aroma compounds responsible for mushroom flavor is 1-octen-3-ol. To meet the demand for natural mushroom flavor, a study was needed for the production of natural chiral specific (-)-1-octen-3-ol that has higher flavor intensity than synthetic chiral mixtures of (+), and (-)-1-octen-3-ol. The biosynthesis of (-)-1-octen-3-ol was achieved by an aerobic oxidation using lipoxygenase (LOX) and hydroperoxide lyase (HPOL) isolated from commercially available mushrooms in Korean market. Safflower oil from Uiseong, Gyeongsangbuk-do, that contains $\geq75\%$ of linoleic acid, was hydrolyzed using lipase. The recovered linoleic acid was biotransformed to stereo-specific 10-hydroperoxy linoleic acid by LOX. 10- hydroperoxy linoleic acid was further cleaved to (-)-1-octen-3-ol by HPOL. A commercial bioprocess for the production of (-)-1-octen-3-ol was developed using a 5-liter jar fermenter with fruiting bodies of Agaricus bisporus harvested from Buyeo, Chungcheongnam-do. The maximum production of (-)-1-octen-3-o1 was achieved at $4^{\circ}C$, pH 6.5 and 800 rpm yielding 748 mg/kg of mushroom.

• Prospectives of Industrial Chemistry
• /
• v.24 no.5
• /
• pp.15-29
• /
• 2021

최근 유기태양전지 분야의 큰 진보는 비풀러렌 전자수용체 소재의 등장에 의해 달성되었다. 비풀러렌 기반 유기광활성층은 기존 풀러렌 기반 소자의 내재적 한계로 지적되던 높은 에너지 손실을 극복하고 동시에 소재의 흡광대역 확장을 통한 광전류밀도 증가로 유기태양전지 성능을 지속적으로 개선하고 있다. 더불어 비풀러렌 소재는 화학 구조의 개질 용이성으로 밴드갭 자유 제어가 가능하므로, 광활성층의 흡광 대역을 정밀하게 제어하면 반투명 태양전지, 실내 저조도 태양전지, 파장선택적 광검출기, 소재융합형 소자 등 다양한 광전자소자 응용이 가능하여 주목받고 있다. 본 기고문에서는 유기태양전지 광활성층에 활용되는 비풀러렌 소재의 최신 연구 동향과 전망을 다루고자 한다.