• Korean Journal of Optics and Photonics
• /
• v.23 no.2
• /
• pp.55-63
• /
• 2012

We present results of optical design and fabrication of a light guiding plate (LGP) to be used as an illumination system for photobioreactors. Modeling of a light-emitting diode (LED) light source, a reflection film, and LGP patterns was performed. Especially, the LGP patterns were modeled as Lambertian scatterers. The modeling parameters (reflectance, scatterer width) were determined through matching simulations with the experimentally measured illuminance distribution for a test LGP. An LGP for an LED light source was designed with the extracted model parameters, and fabricated using a computerized numerical control machine. Optical characteristics including average illuminance and uniformity of illuminance distribution were measured for the fabricated LGP.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.57.1-57
• /
• 2003

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.304-313
• /
• 2017

The finite element analysis for optimizing a mirror system consisting of a large-diameter mirror and flexures requires numerous, repetitive calculations and corrections of the actual model to satisfy the given design conditions. In general, modification of this real model is conducted by reconfiguring nodes of the elements. The reconfiguration is very time-consuming work, to fix the continuity of each of the newly formed component nodes at the interfaces. But the process is a very important factor in determining the analysis time. To save time in modeling and actual computation, and to attain faster convergence, we present a new opto-mechanical analysis using non-shared node connections at each of the interfaces of the optical components. By comparing the results between the new element model and a conventional element model with shared node connections, we found that the opto-mechanical performance was almost the same, but the time to reach the given condition was drastically reduced.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.170-171
• /
• 2002

근래에 광통신의 속도가 10Gbps 이상 증가하면서, 고려하지 않았던 편광과 관련된 현상이 원거리 광통신 시스템에 많은 문제점을 유발하게 되었다. 특히 편광의존손실(PDL)은 시스템의 BER과 신호 왜곡을 가중시켜 시스템 성능을 저하시킨다. 이러한 PDL을 시스템 상에서 보정하는 것은 매우 복잡하고 어렵기 때문에 광 부품 제조 단계에서 PDL을 작게 되도록 해야하며, 이를 위해 정확한 PDL을 측정이 요구된다. (중략)

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1607_1608
• /
• 2009

LED를 조명용으로 사용하기 적합하도록 Lambertian Type의 백색 LED에 1차 렌즈를 씌어서 일정거리의 작업 면에서 균일한 조도를 얻고자, 광학 설계프로그램인 LightTools 를 이용하여 렌즈의 형태를 모델링하고 시뮬레이션을 통해 LED 광원의 배광분포 등의 광학적 특성을 비교분석함으로써 조도 균제도가 우수한 렌즈의 형태를 얻었다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.491-496
• /
• 2002

본 연구는 모션 캡쳐 시스템의 향후 활용 가능성을 알아보고자 한다. 최근 3차원 인체 모델링의 사실적 표현에 대한 각 분야별 관심이 높아짐에 따라 몇 년 사이에 급속도로 발전하고 있는 모션 캡쳐 시스템을 가상현실의 기술적 동향에 따른 그 응용 분야와 모션 캡쳐의 역사적 발전 과정을 고찰하여 분야별 활용 가능성을 제시하는데 그 목적이 있다. 모션 캡쳐 시스템은 캡쳐 받는 유형에 따라 음향식, 기계식, 전자기식, 광학식, 푸펫 등으로 나눌 수 있는데 이 중에 캡쳐 분야에서 주로 많이 사용되고 있는 광학식 시스템을 기반으로 연구를 진행한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.78-79
• /
• 2003

타원법(ellipsometry)을 사용하여 광기록 매체용 Ge$_2$Sb$_2$Te／sub 5／(GST) 박막의 성장과정에 따른 타원상수 Ψ와 $\Delta$를 측정하여, GST 박막의 최적성장조건을 연구하였다. 아르곤기체압력과 DC 출력 그리고 기판의 온도를 변화시키면서 GST 박막을 성장시켰다. 제작된 시료들의 분광타원 데이터를 모델링분석하여 GST 박막의 밀도분포를 구하고 한편으로는 GST 박막이 성장하는 동안 측정한 in situ 타원 성장곡선을 분석하여 박막의 밀도분포의 변화를 추적하였다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.160-161
• /
• 2000

BK7 glass 기판에 Ag$^{+}$-$Na^{+}$ 이온교환법을 이용하여 Y-분리기를 제작하였다. Y-분리기는 하나의 입력으로 입사되는 광파워를 두 개의 출력단으로 분리하거나 합하는 기능을 수행하는 가장 기본적인 소자로서 이온 교환법을 이용하여 0.2dB/cm 이하의 전송손실을 유지할 수 있다. 또한 MMI (multimode interference)가 갖는 파장에 의존적인 동작 특성과는 달리 사용 파장에 덜 의존적으로 광 신호를 분기시킬 수 있다$^{(1-3)}$ . (중략)

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2007

A high power LED which is being used in many illumination applications as a new light source was simulated for its physical structure and then its optical properties were analyzed. To obtain accurate results from the designed LED model, properties of the die chip and reflector cup were varied. As a result, a high power LED model which has a radiation pattern of a Lambertian with its viewing angle of approximately $140^{\circ}$ and total included angle of $160^{\circ}$ was designed.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.